# Admin — Timed Service Charging Units (One Time, Per Minute, Per Hour, Per Day) Every timed service fee says **how** elapsed time turns into money. A nebulisation billed by the minute, a ventilator billed by the hour, a room billed by the day and a physiotherapy visit charged once regardless of how long it took are all configured the same way — by picking a **Charged By** unit on the fee, then giving the length of one charged block in that unit. **Pages:** - `Administration → Manage Inpatient Services → Services → Manage Service Fees` (`/inward/inward_timed_item_fee.xhtml`) — timed service fees - `Administration → Manage Inpatient Services → Rooms → Manage Room Charges` (`/inward/inward_room_facility.xhtml`) — room charge blocks **Privilege:** `InwardAdministration` --- ## The four units | Charged By | What "Duration" means | Typical use | |---|---|---| | **One Time Fee** | *Nothing* — the field is disabled | A visit, a procedure, a set-up charge billed once no matter how long it ran | | **Per Minute** | Length of one charged block, in **minutes** | Nebulisation, short procedures, theatre time | | **Per Hour** | Length of one charged block, in **hours** | Oxygen, ventilator, special nursing | | **Per Day** | Length of one charged block, in **days** | Room rent, daily care charges | ![The Charged By dropdown showing One Time Fee, Per Minute, Per Hour and Per Day](images/timed-service-units-01-charged-by-options.png) **Per Hour is the default**, and it is also what every fee configured before charging units existed is read as. Existing services keep billing exactly as they always have — nothing needs re-entering. The unit only changes behaviour where somebody picks a different one. --- ## Setting up a per-minute service The classic example: **Rs. 10 per minute**. 1. Open **Manage Service Fees** and pick the service under **Select Service** 2. **Fee Name** — a label for this fee block, e.g. `Per Minute Charge` 3. **Fee** — `10` (and **Foreigner Fee** if the service is priced differently for foreign patients) 4. **Charged By** — `Per Minute` 5. **Duration** — `1` (one charged block is one minute) 6. **Slot Order** — `1` 7. Tick **Repeating** so the same rate applies to every following minute 8. Click **Add** ![A per-minute fee saved: Fee 10, Charged By Per Minute, Duration 1, Repeating ticked](images/timed-service-units-02-per-minute-configured.png) A 30-minute service then bills **Rs. 300**. > **Order matters when entering:** pick **Charged By** *before* typing the Duration and > Over Shoot values. Changing the unit refreshes those two fields, which clears anything > already typed into them. ### Charging in blocks larger than one unit Duration does not have to be `1`. `Charged By = Per Minute` with `Duration = 15` bills in quarter-hour blocks — 50 minutes of use is charged as 3 blocks. --- ## Setting up a one-time charge 1. **Charged By** — `One Time Fee` 2. **Duration** and **Over Shoot** grey out — a one-time charge has no block length 3. Enter the **Fee** and **Slot Order**, then **Add** ![One Time Fee selected, with Duration and Over Shoot disabled](images/timed-service-units-03-one-time-disables-duration.png) The fee is charged exactly once for the service, whether it ran for five minutes or a week. --- ## Over Shoot follows the unit **Over Shoot** is the grace period before a partly-used block is charged as a whole block, and it is counted in the **same unit** as Duration: - `Per Day`, Duration `1`, Over Shoot `0.5` → a stay of 36 hours leaves a 12-hour remainder, which reaches the half-day grace, so **2 days** are charged - The same config with Over Shoot `0` charges **1 day**, and the leftover 12 hours are free --- ## Duration is required for time-based fees A time-based fee with a Duration of `0` can only ever price at zero, so it is rejected on save: ![Saving a Per Hour fee with Duration 0 is rejected with "Duration must be greater than 0 for a Per Hour fee."](images/timed-service-units-04-duration-required.png) If what you want is a flat charge, use **One Time Fee** rather than a zero duration. --- ## What staff see when the service is billed The configured unit is applied everywhere a timed service is priced — the timed service consume screen, the room management pages, the interim bill and the final bill all read the same setting, so a service cannot be charged one way on one screen and another way on another. On **Manage Inward Timed Services**, the Total Charges column reflects the unit directly: ![Four timed services billed side by side: per-minute 30 min = 300.00, one-time over 7 days = 2,000.00, per-minute 46 min = 460.00, per-hour 2.5 h = 1,000.00](images/timed-service-units-05-billed-charges.png) Reading that table row by row: | Service | Charged By | Rate | Time used | Charged | |---|---|---|---|---| | Nebulisation | Per Minute, block 1 | Rs. 10 | 30 minutes | **Rs. 300** | | Physiotherapy Visit | One Time Fee | Rs. 2,000 | 7 days | **Rs. 2,000** | | Nebulisation | Per Minute, block 1 | Rs. 10 | 46 minutes | **Rs. 460** | | Oxygen Therapy | Per Hour, block 1 | Rs. 500 | 2 h 30 min | **Rs. 1,000** | The Oxygen Therapy row shows the whole-block rule: two complete hours are charged, and the leftover 30 minutes are not, because that fee has no Over Shoot grace configured. The same amounts carry through to the bill: ![The interim bill's Timed Service Detail tab listing the same four charges](images/timed-service-units-06-interim-bill.png) ### Start Time and Stopped Time A timed service is priced from its **Start Time** to its **Stopped Time**. Both are editable on the consume screen — correct either one and press **Update**, and the charge is recalculated against the new window. A service that has not been stopped yet is priced up to the current time, and is closed automatically at discharge. --- ## Room charges use the same units Room charges are timed charges too, so **Manage Room Charges** has the same **Fee Calculation Block Unit** selector next to its block duration: ![A room charge configured as Per Hour with a block duration of 24](images/timed-service-units-07-room-block-unit.png) Rooms have conventionally been set up as **Per Hour** with a block duration of `24`. That still works and is unchanged. **Per Day** with a duration of `1` is the same thing expressed more plainly, and produces identical charges — pick whichever reads better to the people maintaining the configuration. The **Over Shoot for the last Block** value follows the unit here too, so a room converted from `Per Hour / 24 / Over Shoot 1` to `Per Day / 1` needs its Over Shoot re-expressed in days (1 hour = `0.0417` days) if that grace period is to be preserved. --- ## Related Articles - [Admin — Inpatient Timed Services](Admin-Inpatient-Timed-Services) — categories, services and fees, and how timed services attach to a BHT - [Admin — Room Categories, Rooms, and Room Fees](Admin-Inpatient-Room-Categories-Rooms-Fees) - [Admin — Inpatient Module Configuration Overview](Admin-Inpatient-Module-Configuration-Overview)