# Inpatient — Room Assignment Modes and Billing Start Time When a patient is admitted, the system can handle room assignment and the start of room-based billing in two distinct ways, controlled by a single configuration key. Understanding which mode your hospital uses is essential for correctly interpreting interim bills and for resolving queries from clinical or finance staff about when charges begin. --- ## The Two Modes at a Glance | | Mode 1 — Simultaneous (Default) | Mode 2 — Deferred Ward Acceptance | |---|---|---| | **Config key value** | `true` | `false` | | **Room accepted at** | Admission desk, immediately | Receiving ward, after the ward accepts the patient | | **Billing starts at** | Date and time of admission | Date and time the ward clicks **Accept** | | **Transfer request created?** | No | Yes — status **Pending** until ward accepts | | **Ward acceptance page needed?** | No | Yes — `Inpatient → Room → Accept Patients` | | **Who controls billing start?** | Admission staff | Ward nursing / reception staff | --- ## Configuration **Config key:** `Patient admission and room assignment are simultaneous processes.` **Default value:** `true` **Where to set it:** `Administration → Manage Institutions → Preferences → Application Options` — search for "simultaneous" > **Screenshot:** Administration → Manage Institutions → Preferences → Application Options page filtered to "simultaneous", showing the toggle set to either true or false. - Set to **`true`** for Mode 1 — Simultaneous (the original, common behaviour). - Set to **`false`** for Mode 2 — Deferred Ward Acceptance. Changing this key takes effect immediately for new admissions; it does not retroactively alter existing admissions. --- ## Mode 1 — Simultaneous (Config = `true`) This is the default. The room is assigned and immediately accepted during the admission process. No separate ward acceptance step exists. ### Workflow 1. Admission clerk opens `Inpatient → Admissions → Patient Admit`. 2. Clerk fills in the admission form including the **Room No** field. 3. Clerk clicks **Admit**. 4. The system saves the admission, assigns the room, and sets: - `PatientEncounter.roomAdmitted = true` - `PatientRoom.admittedAt = date and time of admission` 5. The clerk is taken directly to the **Inpatient Admission Profile** (BHT dashboard). > **Screenshot:** Admission form showing the Room No field completed, and the Admit button. > **Screenshot:** Inpatient Admission Profile opened immediately after admission. ### Billing Implications Room charges (bed rate, bundled timed services) start accumulating **from the admission date and time** recorded on the admission form. If a patient is admitted at 10:00 AM and discharged at 4:00 PM the next day, room charges are calculated from 10:00 AM Day 1 to 4:00 PM Day 2. On the interim bill, the room charge line will show `admittedAt = admission date/time`. Staff reviewing an interim bill in this mode can confirm the start time matches what was entered on the admission form. --- ## Mode 2 — Deferred Ward Acceptance (Config = `false`) In this mode, completing the admission form does **not** start room billing. A pending transfer request is created instead, and billing only begins once a ward staff member explicitly accepts the patient at the ward's acceptance page. This mode is suited for hospitals where: - Admission is registered at a central desk while the physical bed is prepared separately. - Ward nursing staff confirm the exact time the patient arrives at the ward. - Finance policy requires billing to start only when the patient physically reaches the room. ### Workflow — Admission Side 1. Admission clerk opens `Inpatient → Admissions → Patient Admit`. 2. Clerk fills in the admission form including the **Room No** field. 3. Clerk clicks **Admit**. 4. The system saves the admission and creates a **Pending** transfer request (type: Admission). It sets: - `PatientEncounter.roomAdmitted = false` - A `PatientTransferRequest` with status `PENDING` 5. The clerk is taken to `Inpatient → Room → Admit Room` (not the BHT dashboard) because the room is not yet accepted. > **Screenshot:** After clicking Admit in Mode 2 — the system opens the Admit Room page instead of the BHT dashboard, because roomAdmitted is still false. ### Workflow — Ward Acceptance Side The receiving ward must explicitly accept the patient to start billing. 1. Ward staff open `Inpatient → Room → Accept Patients` (or navigate to the Admission Profile Dashboard → Room Management → **Accept Patients**). 2. A list of **Pending Patients** is shown for the current department. > **Screenshot:** Accept Patients page showing a pending admission with BHT No, Patient Name, Type = "Admission", From = "Admission Desk", and the To Room column. 3. Staff review the **Accepted At** date-time picker for each pending patient. This field defaults to the current time but **can be adjusted** to reflect the actual time the patient arrived at the ward. 4. Staff click **Accept** (with a confirmation prompt). 5. The system: - Sets `PatientTransferRequest.status = ACCEPTED` - Sets `PatientEncounter.roomAdmitted = true` - Sets `PatientRoom.admittedAt = acceptedAt` (the time the ward set in the date-time picker) 6. Staff are taken to the BHT dashboard for that admission. > **Screenshot:** Accept Patients page with the Accepted At date-time picker visible, and the Accept / Cancel action buttons. > **Screenshot:** Confirmation dialog "Accept this patient?" before acceptance. ### Billing Implications Room charges start accumulating **from the Accepted At date and time**, not from the admission date. **Example:** A patient is admitted at 09:00 AM. The ward accepts the patient at 10:30 AM (when they physically arrive at the ward). Room billing starts at 10:30 AM, not 09:00 AM. On the interim bill, the room charge line reflects `admittedAt = ward acceptance time`. If the interim bill shows charges starting at a different time than when the patient was registered at admission, this is expected and correct behaviour in Mode 2. --- ## Interim Bill — How Charges Are Calculated Regardless of mode, the interim bill always uses `PatientRoom.admittedAt` as the start of the billing period for each room segment. ### Room Charge Formula ``` Room charge = (Rate per unit) × (Number of billable units between admittedAt and billing time) ``` The billable unit (hours, calendar days, etc.) is defined per room category in the timed services configuration. ### Multi-Room Stays If a patient transfers between wards or rooms during their stay: - Each room segment has its own `admittedAt` (start) and `dischargedAt` (end). - In Mode 2 (Deferred), the start of each segment is the acceptance time at the receiving ward. - The interim bill lists each room segment separately. > **Screenshot:** Interim bill showing two room segments (e.g., General Ward followed by ICU), each with their own start and end times and charge totals. ### Common Interim Bill Confusion | Observation on Interim Bill | Mode 1 Explanation | Mode 2 Explanation | |---|---|---| | Room charges start exactly at admission time | Expected — billing is simultaneous with admission | Should not happen; check if config key is set correctly | | Room charges start later than admission time | Room may have been changed/transferred | Expected — this is the ward acceptance time | | No room charges at all | Patient may not have a room assigned yet | Ward has not yet accepted the patient | | Room charges start at an unexpected past time | Admission time may have been backdated | Ward acceptance time may have been manually backdated | --- ## Navigation Summary | Action | Page | Config mode | |---|---|---| | Admit a patient | `Inpatient → Admissions → Patient Admit` | Both | | Manually admit room (deferred only) | `Inpatient → Room → Admit Room` | Mode 2 only | | Accept pending patients (ward side) | `Inpatient → Room → Accept Patients` | Mode 2 only | | View interim bill | `Inpatient → Billing → Interim Bill` | Both | | Change accepted-at timestamp | `Accept Patients` page date-time picker, before clicking Accept | Mode 2 only | --- ## Related Articles - [Inpatient — Admit a Patient](Inpatient-Admit-a-Patient) — admission form fields and workflow - [Inpatient — Patient Transfer Between Wards](Inpatient-Patient-Transfer-Between-Wards) — ward-to-ward transfer using the same two-step accept flow - [Finance — Inpatient Interim Bills](Finance-Inpatient-Interim-Bills) — generating and interpreting interim bills - [Admin — Inpatient Module Behaviour Config Keys](Admin-Inpatient-Module-Behaviour-Config-Keys) — full list of behaviour config keys - [Admin — Inpatient Timed Services](Admin-Inpatient-Timed-Services) — how room charge rates and billing units are configured