# Sample Separation Sample separation (also called aliquoting or sample splitting) is the process of dividing a single collected sample into two or more sub-samples so that different tests can be run on separate aliquots — for example, sending one portion to biochemistry and another to haematology from a single blood draw. --- ## When to Use Sample Separation Use sample separation when: - A patient's sample needs to be analysed on instruments in **different departments** that require their own labelled containers. - The volume of the original sample is sufficient to split without affecting any individual test. - The lab's workflow routes specific test types to specific analyzers that each need their own barcoded tube. If all tests can be run from a single container without splitting, separation is not necessary. --- ## How to Separate a Sample 1. Go to **Lab → Sample Management** or the **Laboratory Dashboard > Samples** tab. 2. Search for the investigation or sample by bill barcode, patient name, or sample status. 3. Select the investigation you want to separate. 4. Click **Separate Sample** (or **Divide Sample**). 5. The system creates one or more **sub-sample records**, each with its own barcode. 6. Print the new barcode stickers for each sub-sample container using the **Print Sticker** button next to each sub-sample. 7. Pour or pipette the sample into the sub-sample containers and attach the correct sticker to each. 8. Each sub-sample can now be sent to a different department or placed on a different analyzer rack. --- ## Status After Separation After separation, the original investigation's status moves to **Sample Separated** (or **Separate and Barcode Generated**, depending on configuration). Each sub-sample appears as a linked record in the system and follows the standard reception and acceptance workflow at its destination department. --- ## Sending Sub-Samples to Different Departments Once separated: 1. Each sub-sample barcode is scanned at the receiving department. 2. The receiving technician accepts the sub-sample using the same [sample reception](https://github.com/hmislk/hmis/wiki/LIMS-Receiving-Samples-at-the-Lab) process. 3. Results from each department are entered against the same patient investigation record — the system consolidates them into one report. --- ## Configuration Note Whether sample separation is allowed — and at what stage of the workflow it can be performed — is controlled by the lab administrator. The setting **"Allow a sample to be separated in any status"** determines whether separation can only happen before the sample is received, or also after. If the **Separate Sample** button is not visible or is disabled for an investigation, contact your lab administrator. --- ## Tips and Best Practices - Label sub-sample containers immediately after pouring — never leave unlabelled aliquots on the bench. - Verify that the volume of each sub-sample is sufficient for the tests assigned to it before dispatching to the department. - For time-sensitive tests (e.g., blood gas, coagulation), complete the separation as quickly as possible to avoid sample degradation. --- [Back to LIMS](https://github.com/hmislk/hmis/wiki/LIMS)