Home Assistant Add-on: HomeMatic
RaspberryMatic CCU add-on for running a HomeMatic/homematicIP smart home central within HomeAssistant. If you want to migrate to the new add-on, please make sure to update to the latest version of this old "HomeMatic CCU" add-on first and then use the WebUI-based backup routines to export a
WARNING: This add-on is considered to be obsolete/retired in favor of the much more advanced third-party
*.sbk config backup file which you can then restore in the new "RaspberryMatic CCU" add-on afterwards (cf. RaspberryMatic Documentation)
Follow these steps to get the add-on installed on your system:
- Navigate in your Home Assistant frontend to Supervisor -> Add-on Store.
- Find the "HomeMatic CCU" add-on and click it.
- Click on the "INSTALL" button.
How to use
- Properly configure the add-on config (see below).
- Start the add-on.
- Check the add-on log output to see if it started successfully.
- Add homematic to your Home Assistant configuration (also see below).
- Restart Home Assistant.
rf_enable: true rf: - type: CCU2 device: "/dev/ttyAMA0" wired_enable: false wired: - serial: xy key: abc ip: 192.168.0.0 hmip_enable: false hmip: - type: HMIP_CCU2 device: "/dev/ttyUSB0" regahss_reset: false
Enable or disable BidCoS-RF.
List of RF devices.
Device type for RFD service. Check your device manual.
Device on the host.
Enable or disable BidCoS-Wired.
List of wired devices.
Serial number of the device.
Encryption key for the device.
IP address of LAN gateway.
Enable or disable hmip.
List of HMIP devices.
Device type for HMIP service. Check your device manual.
Device on the host.
If this is set and enabled, the ReGaHss setting will be removed before it will be started.
Home Assistant configuration
Add the following to your Home Assistant configuration to enable the integration:
homematic: interfaces: rf: host: core-homematic port: 2001 wired: host: core-homematic port: 2000 hmip: host: core-homematic port: 2010 group: host: core-homematic port: 9292 path: /groups
If you use the HM-MOD-RPI-PCB on a Raspberry Pi 3 or 4, you need to add
the following to the
config.txt file on the boot partition:
HassOS versions 1.11 and later support the HmIP-RFUSB by default and don't need any configuration. If you installed Hassio on another distribution of Linux, you need to follow the installation guide for the UART USB to setup the UART USB interface on your computer.
You have several options to get them answered:
- The Home Assistant Discord Chat Server.
- The Home Assistant Community Forum.
- Join the Reddit subreddit in /r/homeassistant
In case you've found a bug, please open an issue on our GitHub.