This is the documentation for the configuration file for Honeycomb's Refinery. It was automatically generated on 2024-07-29 at 17:37:53 UTC.
The config file is a YAML file. The file is split into sections; each section is a group of related configuration options. Each section has a name, and the name is used to refer to the section in other parts of the config file.
This is a sample config file:
General:
ConfigurationVersion: 2
Network:
ListenAddr: "0.0.0.0:8080"
PeerListenAddr: "0.0.0.0:8081"
OTelMetrics:
Enabled: true
APIKey: SetThisToAHoneycombKey
The remainder of this document describes the sections within the file and the fields in each.
- General Configuration
- Network Configuration
- Access Key Configuration
- Refinery Telemetry
- Traces
- Debugging
- Refinery Logger
- Honeycomb Logger
- Stdout Logger
- Prometheus Metrics
- Legacy Metrics
- OpenTelemetry Metrics
- OpenTelemetry Tracing
- Peer Management
- Redis Peer Management
- Collection Settings
- Buffer Sizes
- Specialized Configuration
- ID Fields
- gRPC Server Parameters
- Sample Cache
- Stress Relief
General
contains general configuration options that apply to the entire Refinery process.
ConfigurationVersion is the file format of this particular configuration file.
This file is version 2. This field is required. It exists to allow the configuration system to adapt to future changes in the configuration file format.
- Not eligible for live reload.
- Type:
int
- Default:
2
MinRefineryVersion is the minimum version of Refinery that can load this configuration file.
This setting specifies the lowest Refinery version capable of loading all of the features used in this file. If this value is present, then Refinery will refuse to start if its version is less than this setting.
- Not eligible for live reload.
- Type:
string
- Default:
v2.0
DatasetPrefix is a prefix that can be used to distinguish a dataset from an environment in the rules.
If telemetry is being sent to both a classic dataset and a new environment called the same thing, such as production
, then this parameter can be used to distinguish these cases.
When Refinery receives telemetry using an API key associated with a Honeycomb Classic dataset, it will then use the prefix in the form {prefix}. {dataset}
when trying to resolve the rules definition.
- Not eligible for live reload.
- Type:
string
ConfigReloadInterval is the average interval between attempts at reloading the configuration file.
Refinery will attempt to read its configuration and check for changes at approximately this interval.
This time is varied by a random amount up to 10% to avoid all instances refreshing together.
In installations where configuration changes are handled by restarting Refinery, which is often the case when using Kubernetes, disable this feature with a value of 0s
.
As of Refinery v2.7, news of a configuration change is immediately propagated to all peers, and they will attempt to reload their configurations.
Note that external factors (for example, Kubernetes ConfigMaps) may cause delays in propagating configuration changes.
- Not eligible for live reload.
- Type:
duration
- Default:
15s
Network
contains network configuration options.
ListenAddr is the address where Refinery listens for incoming requests.
This setting is the IP and port on which Refinery listens for incoming HTTP requests.
These requests include traffic formatted as Honeycomb events, proxied requests to the Honeycomb API, and OpenTelemetry data using the http
protocol.
Incoming traffic is expected to be HTTP, so if SSL is a requirement, put something like nginx
in front to do the decryption.
- Not eligible for live reload.
- Type:
hostport
- Default:
0.0.0.0:8080
- Environment variable:
REFINERY_HTTP_LISTEN_ADDRESS
- Command line switch:
--http-listen-address
PeerListenAddr is the IP and port on which to listen for traffic being rerouted from a peer.
Incoming traffic is expected to be HTTP, so if using SSL use something like nginx or a load balancer to do the decryption.
- Not eligible for live reload.
- Type:
hostport
- Default:
0.0.0.0:8081
- Environment variable:
REFINERY_PEER_LISTEN_ADDRESS
- Command line switch:
--peer-listen-address
HTTPIdleTimeout is the duration the http server waits for activity on the connection.
This is the amount of time after which if the http server does not see any activity, then it pings the client to see if the transport is still alive. "0s" means no timeout.
- Not eligible for live reload.
- Type:
duration
- Default:
0s
HoneycombAPI is the URL of the upstream Honeycomb API where the data will be sent.
This setting is the destination to which Refinery sends all events that it decides to keep.
- Eligible for live reload.
- Type:
url
- Default:
https://api.honeycomb.io
- Environment variable:
REFINERY_HONEYCOMB_API
- Command line switch:
--honeycomb-api
AccessKeys
contains access keys -- API keys that the proxy will treat specially, and other flags that control how the proxy handles API keys.
ReceiveKeys is a set of Honeycomb API keys that the proxy will treat specially.
This list only applies to span traffic - other Honeycomb API actions will be proxied through to the upstream API directly without modifying keys.
- Not eligible for live reload.
- Type:
stringarray
- Example:
your-key-goes-here
AcceptOnlyListedKeys is a boolean flag that causes events arriving with API keys not in the ReceiveKeys
list to be rejected.
If true
, then only traffic using the keys listed in ReceiveKeys
is accepted.
Events arriving with API keys not in the ReceiveKeys
list will be rejected with an HTTP 401
error.
If false
, then all traffic is accepted and ReceiveKeys
is ignored.
- Eligible for live reload.
- Type:
bool
RefineryTelemetry
contains configuration information for the telemetry that Refinery uses to record its own operation.
AddRuleReasonToTrace controls whether to decorate traces with Refinery rule evaluation results.
When enabled, this setting causes traces that are sent to Honeycomb to include the field meta.refinery.reason
.
This field contains text indicating which rule was evaluated that caused the trace to be included.
This setting also includes the field meta.refinery.send_reason
, which contains the reason that the trace was sent.
Possible values of this field are trace_send_got_root
, which means that the root span arrived; trace_send_expired
, which means that TraceTimeout was reached; trace_send_ejected_full
, which means that the trace cache was full; and trace_send_ejected_memsize
, which means that refinery was out of memory.
These names are also the names of metrics that refinery tracks.
We recommend enabling this setting whenever a rules-based sampler is in use, as it is useful for debugging and understanding the behavior of your Refinery installation.
- Eligible for live reload.
- Type:
bool
- Example:
true
AddSpanCountToRoot controls whether to add a metadata field to root spans that indicates the number of child elements in a trace.
The added metadata field, meta.span_count
, indicates the number of child elements on the trace at the time the sampling decision was made.
This value is available to the rules-based sampler, making it possible to write rules that are dependent upon the number of spans, span events, and span links in the trace.
If true
and AddCountsToRoot
is set to false, then Refinery will add meta.span_count
to the root span.
- Eligible for live reload.
- Type:
bool
- Default:
true
AddCountsToRoot controls whether to add metadata fields to root spans that indicates the number of child spans, span events, span links, and honeycomb events.
If true
, then Refinery will ignore the AddSpanCountToRoot
setting and add the following fields to the root span based on the values at the time the sampling decision was made:
-
meta.span_count
: the number of child spans on the trace -
meta.span_event_count
: the number of span events on the trace -
meta.span_link_count
: the number of span links on the trace -
meta.event_count
: the number of honeycomb events on the trace -
Eligible for live reload.
-
Type:
bool
AddHostMetadataToTrace specifies whether to add host metadata to traces.
If true
, then Refinery will add the following tag to all traces: - meta.refinery.local_hostname
: the hostname of the Refinery node
- Eligible for live reload.
- Type:
bool
- Default:
true
Traces
contains configuration for how traces are managed.
SendDelay is the duration to wait before sending a trace.
This setting is a short timer that is triggered when a trace is complete. Refinery waits for this duration before sending the trace. The reason for this setting is to allow for small network delays or clock jitters to elapse and any final spans to arrive before sending the trace. Set to "0" for immediate sending.
- Eligible for live reload.
- Type:
duration
- Default:
2s
BatchTimeout is how frequently Refinery sends unfulfilled batches.
By default, this setting uses the DefaultBatchTimeout
in libhoney
as its value, which is 100ms
.
- Eligible for live reload.
- Type:
duration
- Example:
500ms
TraceTimeout is the duration to wait before making the trace decision on an incomplete trace.
A long timer; it represents the outside boundary of how long to wait before making the trace decision about an incomplete trace. Normally trace decisions (send or drop) are made when the root span arrives. Sometimes the root span never arrives (for example, due to crashes). Once this timer fires, Refinery will make a trace decision based on the spans that have arrived so far. This ensures sending a trace even when the root span never arrives. After the trace decision has been made, Refinery retains a record of that decision for a period of time. When additional spans (including the root span) arrive, they will be kept or dropped based on the original decision. If particularly long-lived traces are present in your data, then you should increase this timer. Note that this increase will also increase the memory requirements for Refinery.
- Eligible for live reload.
- Type:
duration
- Default:
60s
MaxBatchSize is the maximum number of events to be included in each batch for sending.
This value is used to set the BatchSize
field in the libhoney
library used to send data to Honeycomb.
If you have particularly large traces, then you should increase this value.
Note that this will also increase the memory requirements for Refinery.
- Eligible for live reload.
- Type:
int
- Default:
500
SendTicker is the interval between checks for traces to send.
A short timer that determines the duration between trace cache review runs to send.
Increasing this will spend more time processing incoming events to reduce incoming_
or peer_router_dropped
spikes.
Decreasing this will check the trace cache for timeouts more frequently.
- Eligible for live reload.
- Type:
duration
- Default:
100ms
Debugging
contains configuration values used when setting up and debugging Refinery.
DebugServiceAddr is the IP and port where the debug service runs.
The debug service is generally only used when debugging Refinery itself, and will only run if the command line option -d
is specified.
If this value is not specified, then the debug service runs on the first open port between localhost:6060
and localhost:6069
.
- Not eligible for live reload.
- Type:
hostport
- Example:
localhost:6060
QueryAuthToken is the token that must be specified to access the /query
endpoint.
This token must be specified with the header "X-Honeycomb-Refinery-Query" in order for a /query
request to succeed.
These /query
requests are intended for debugging Refinery during setup and are not typically needed in normal operation.
If not specified, then the /query
endpoints are inaccessible.
- Not eligible for live reload.
- Type:
string
- Example:
some-private-value
- Environment variable:
REFINERY_QUERY_AUTH_TOKEN
AdditionalErrorFields is a list of span fields to include when logging errors happen during the ingestion of events.
For example, the span too large error.
This is primarily useful in trying to track down misbehaving senders in a large installation.
The fields dataset
, apihost
, and environment
are always included.
If a field is not present in the span, then it will not be present in the error log.
- Eligible for live reload.
- Type:
stringarray
- Example:
trace.span_id
DryRun controls whether sampling is applied to incoming traces.
If enabled, then Refinery marks the traces that would be dropped given the current sampling rules, and sends all traces regardless of the sampling decision.
This is useful for evaluating sampling rules.
When DryRun is enabled, traces is decorated with meta.refinery. dryrun.kept
that is set to true
or false
, based on whether the trace would be kept or dropped.
In addition, SampleRate
will be set to the incoming rate for all traces, and the field meta.refinery.dryrun.sample_rate
will be set to the sample rate that would have been used.
- Eligible for live reload.
- Type:
bool
- Example:
true
Logger
contains configuration for logging.
Type is the type of logger to use.
The setting specifies where (and if) Refinery sends logs.
none
means that logs are discarded.
honeycomb
means that logs will be forwarded to Honeycomb as events according to the set Logging settings.
stdout
means that logs will be written to stdout
.
- Not eligible for live reload.
- Type:
string
- Default:
stdout
- Options:
stdout
,honeycomb
,none
Level is the logging level above which Refinery should send a log to the logger.
warn
is the recommended level for production.
debug
is very verbose, and should not be used in production environments.
- Not eligible for live reload.
- Type:
string
- Default:
warn
- Options:
debug
,info
,warn
,error
,panic
HoneycombLogger
contains configuration for logging to Honeycomb.
Only used if Logger.Type
is "honeycomb".
APIHost is the URL of the Honeycomb API where Refinery sends its logs.
Refinery's internal logs will be sent to this host using the standard Honeycomb Events API.
- Not eligible for live reload.
- Type:
url
- Default:
https://api.honeycomb.io
APIKey is the API key used to send Refinery's logs to Honeycomb.
It is recommended that you create a separate team and key for Refinery logs.
- Not eligible for live reload.
- Type:
string
- Example:
SetThisToAHoneycombKey
- Environment variable:
REFINERY_HONEYCOMB_LOGGER_API_KEY, REFINERY_HONEYCOMB_API_KEY
Dataset is the dataset to which logs will be sent.
Only used if APIKey
is specified.
- Not eligible for live reload.
- Type:
string
- Default:
Refinery Logs
SamplerEnabled controls whether logs are sampled before sending to Honeycomb.
The sample rate is controlled by the SamplerThroughput
setting.
The sampler used throttles the rate of logs sent to Honeycomb from any given source within Refinery -- it should effectively limit the rate of redundant messages.
- Not eligible for live reload.
- Type:
bool
- Default:
true
SamplerThroughput is the sampling throughput for logs in events per second.
The sampling algorithm attempts to make sure that the average throughput approximates this value, while also ensuring that all unique logs arrive at Honeycomb at least once per sampling period.
- Not eligible for live reload.
- Type:
float
- Default:
10
- Example:
10
StdoutLogger
contains configuration for logging to stdout
.
Only used if Logger.Type
is "stdout".
Structured controls whether to use structured logging.
true
generates structured logs (JSON).
false
generates plain text logs.
- Not eligible for live reload.
- Type:
bool
SamplerEnabled controls whether logs are sampled before sending to stdout
.
The sample rate is controlled by the SamplerThroughput
setting.
- Not eligible for live reload.
- Type:
bool
SamplerThroughput is the sampling throughput for logs in events per second.
The sampling algorithm attempts to make sure that the average throughput approximates this value, while also ensuring that all unique logs arrive at stdout
at least once per sampling period.
- Not eligible for live reload.
- Type:
float
- Default:
10
- Example:
10
PrometheusMetrics
contains configuration for Refinery's internally-generated metrics as made available through Prometheus.
Enabled controls whether to expose Refinery metrics over the PrometheusListenAddr
port.
Each of the metrics providers can be enabled or disabled independently. Metrics can be sent to multiple destinations.
- Not eligible for live reload.
- Type:
bool
ListenAddr is the IP and port the Prometheus Metrics server will run on.
Determines the interface and port on which Prometheus will listen for requests for /metrics
.
Must be different from the main Refinery listener.
Only used if Enabled
is true
in PrometheusMetrics
.
- Not eligible for live reload.
- Type:
hostport
- Default:
localhost:2112
LegacyMetrics
contains configuration for Refinery's legacy metrics.
Version 1.x of Refinery used this format for sending Metrics to Honeycomb.
The metrics generated that way are nonstandard and will be deprecated in a future release.
New installations should prefer OTelMetrics
.
Enabled controls whether to send legacy-formatted metrics to Honeycomb.
Each of the metrics providers can be enabled or disabled independently. Metrics can be sent to multiple destinations.
- Not eligible for live reload.
- Type:
bool
APIHost is the URL of the Honeycomb API where legacy metrics are sent.
Refinery's internal metrics will be sent to this host using the standard Honeycomb Events API.
- Not eligible for live reload.
- Type:
url
- Default:
https://api.honeycomb.io
APIKey is the API key used by Refinery to send its metrics to Honeycomb.
It is recommended that you create a separate team and key for Refinery metrics.
- Not eligible for live reload.
- Type:
string
- Example:
SetThisToAHoneycombKey
- Environment variable:
REFINERY_HONEYCOMB_METRICS_API_KEY, HONEYCOMB_API_KEY
Dataset is the Honeycomb dataset where Refinery sends its metrics.
Only used if APIKey
is specified.
- Not eligible for live reload.
- Type:
string
- Default:
Refinery Metrics
ReportingInterval is the interval between sending legacy metrics to Honeycomb.
Between 1 and 60 seconds is typical.
- Not eligible for live reload.
- Type:
duration
- Default:
30s
OTelMetrics
contains configuration for Refinery's OpenTelemetry (OTel) metrics.
This is the preferred way to send metrics to Honeycomb.
New installations should prefer OTelMetrics
.
Enabled controls whether to send metrics via OpenTelemetry.
Each of the metrics providers can be enabled or disabled independently. Metrics can be sent to multiple destinations.
- Not eligible for live reload.
- Type:
bool
APIHost is the URL of the OpenTelemetry API to which metrics will be sent.
Refinery's internal metrics will be sent to the /v1/metrics
endpoint on this host.
- Not eligible for live reload.
- Type:
url
- Default:
https://api.honeycomb.io
APIKey is the API key used to send Honeycomb metrics via OpenTelemetry.
It is recommended that you create a separate team and key for Refinery metrics.
If this is blank, then Refinery will not set the Honeycomb-specific headers for OpenTelemetry, and your APIHost
must be set to a valid OpenTelemetry endpoint.
- Not eligible for live reload.
- Type:
string
- Example:
SetThisToAHoneycombKey
- Environment variable:
REFINERY_OTEL_METRICS_API_KEY, HONEYCOMB_API_KEY
Dataset is the Honeycomb dataset that Refinery sends its OpenTelemetry metrics.
Only used if APIKey
is specified.
- Not eligible for live reload.
- Type:
string
- Default:
Refinery Metrics
ReportingInterval is the interval between sending OpenTelemetry metrics to Honeycomb.
Between 1
and 60
seconds is typical.
- Not eligible for live reload.
- Type:
duration
- Default:
30s
Compression is the compression algorithm to use when sending OpenTelemetry metrics to Honeycomb.
gzip
is the default and recommended value.
In rare circumstances, compression costs may outweigh the benefits, in which case none
may be used.
- Not eligible for live reload.
- Type:
string
- Default:
gzip
- Options:
none
,gzip
OTelTracing
contains configuration for Refinery's own tracing.
Enabled controls whether to send Refinery's own OpenTelemetry traces.
The setting specifies if Refinery sends traces.
- Not eligible for live reload.
- Type:
bool
APIHost is the URL of the OpenTelemetry API to which traces will be sent.
Refinery's internal traces will be sent to the /v1/traces
endpoint on this host.
- Not eligible for live reload.
- Type:
url
- Default:
https://api.honeycomb.io
APIKey is the API key used to send Refinery's traces to Honeycomb.
It is recommended that you create a separate team and key for Refinery telemetry.
If this value is blank, then Refinery will not set the Honeycomb-specific headers for OpenTelemetry, and your APIHost
must be set to a valid OpenTelemetry endpoint.
- Not eligible for live reload.
- Type:
string
- Example:
SetThisToAHoneycombKey
- Environment variable:
REFINERY_HONEYCOMB_TRACES_API_KEY, REFINERY_HONEYCOMB_API_KEY
Dataset is the Honeycomb dataset to which Refinery sends its OpenTelemetry metrics.
Only used if APIKey
is specified.
- Not eligible for live reload.
- Type:
string
- Default:
Refinery Traces
SampleRate is the rate at which Refinery samples its own traces.
This is the Honeycomb sample rate used to sample traces sent by Refinery.
Since each incoming span generates multiple outgoing spans, a minimum sample rate of 100
is strongly advised.
- Eligible for live reload.
- Type:
int
- Default:
100
PeerManagement
controls how the Refinery cluster communicates between peers.
Type is the type of peer management to use.
Peer management is the mechanism by which Refinery locates its peers.
file
means that Refinery gets its peer list from the Peers list in this config file.
It also prevents Refinery from using a publish/subscribe mechanism to propagate peer lists, stress levels, and configuration changes.
redis
means that Refinery uses a Publish/Subscribe mechanism, implemented on Redis, to propagate peer lists, stress levels, and notification of configuration changes much more quickly than the legacy mechanism.
The recommended setting is redis
, especially for new installations.
If redis
is specified, fields in RedisPeerManagement
must also be set.
- Not eligible for live reload.
- Type:
string
- Default:
file
- Options:
redis
,file
Identifier specifies the identifier to use when registering itself with peers.
By default, when using a peer registry, Refinery will use the local hostname to identify itself to other peers.
If your environment requires something else, (for example, if peers cannot resolve each other by name), then you can specify the exact identifier, such as an IP address, to use here.
Overrides IdentifierInterfaceName
, if both are set.
- Not eligible for live reload.
- Type:
string
- Example:
192.168.1.1
IdentifierInterfaceName specifies a network interface to use when finding a local hostname.
By default, when using a peer registry, Refinery will use the local hostname to identify itself to other peers. If your environment requires that you use IPs as identifiers (for example, if peers cannot resolve each other by name), then you can specify the network interface that Refinery is listening on here. Refinery will use the first unicast address that it finds on the specified network interface as its identifier.
- Not eligible for live reload.
- Type:
string
- Example:
eth0
UseIPV6Identifier specifies that Refinery should use an IPV6 address as its identifier.
If using IdentifierInterfaceName
, Refinery will default to the first IPv4 unicast address it finds for the specified interface.
If this value is specified, then Refinery will use the first IPV6 unicast address found.
- Not eligible for live reload.
- Type:
bool
Peers is the list of peers to use when Type is "file", excluding self.
This list is ignored when Type is "redis". The format is a list of strings of the form "scheme://host:port".
- Not eligible for live reload.
- Type:
stringarray
- Example:
http://192.168.1.11:8081,http://192.168.1.12:8081
RedisPeerManagement
controls how the Refinery cluster communicates between peers when using Redis.
Does not apply when PeerManagement.Type
is "file".
Host is the host and port of the Redis instance to use for peer cluster membership management.
Must be in the form host:port
.
- Not eligible for live reload.
- Type:
hostport
- Example:
localhost:6379
- Environment variable:
REFINERY_REDIS_HOST
Username is the username used to connect to Redis for peer cluster membership management.
Many Redis installations do not use this field.
- Not eligible for live reload.
- Type:
string
- Environment variable:
REFINERY_REDIS_USERNAME
Password is the password used to connect to Redis for peer cluster membership management.
Many Redis installations do not use this field.
- Not eligible for live reload.
- Type:
string
- Environment variable:
REFINERY_REDIS_PASSWORD
AuthCode is the string used to connect to Redis for peer cluster membership management using an explicit AUTH command.
Many Redis installations do not use this field.
- Not eligible for live reload.
- Type:
string
- Environment variable:
REFINERY_REDIS_AUTH_CODE
UseTLS enables TLS when connecting to Redis for peer cluster membership management.
When enabled, this setting sets the MinVersion
in the TLS configuration to 1.2
.
- Not eligible for live reload.
- Type:
bool
UseTLSInsecure disables certificate checks when connecting to Redis for peer cluster membership management.
This setting is intended for use with self-signed certificates and sets the InsecureSkipVerify
flag within Redis.
- Not eligible for live reload.
- Type:
bool
Timeout is the timeout to use when communicating with Redis.
It is rarely necessary to adjust this value.
- Not eligible for live reload.
- Type:
duration
- Default:
5s
Collection
contains the settings that are relevant to collecting spans together to make traces.
If none of the memory settings are used, then Refinery will not attempt to limit its memory usage.
This is not recommended for production use since a burst of traffic could cause Refinery to run out of memory and crash.
CacheCapacity is the number of traces to keep in the cache's circular buffer.
The collection cache is used to collect all spans into a trace as well as remember the sampling decision for any spans that might come in after the trace has been marked "complete" (either by timing out or seeing the root span). The number of traces in the cache should be many multiples (100x to 1000x) of the total number of concurrently active traces (trace throughput * trace duration).
- Eligible for live reload.
- Type:
int
- Default:
10000
PeerQueueSize is the maximum number of in-flight spans redirected from other peers stored in the peer span queue.
The peer span queue serves as a buffer for spans redirected from other peers before they are processed.
In the event that this queue reaches its capacity, any subsequent spans will be discarded.
The size of this queue is contingent upon the number of peers within the cluster.
Specifically, with N peers, the queue's span capacity is determined by (N-1)/N of the total number of spans.
Its minimum value should be at least three times the CacheCapacity
.
- Not eligible for live reload.
- Type:
int
- Default:
30000
IncomingQueueSize is the number of in-flight spans to keep in the incoming span queue.
The incoming span queue is used to buffer spans before they are processed.
If this queue fills up, then subsequent spans will be dropped.
Its minimum value should be at least three times the CacheCapacity
.
- Not eligible for live reload.
- Type:
int
- Default:
30000
AvailableMemory is the amount of system memory available to the Refinery process.
This value will typically be set through an environment variable controlled by the container or deploy script.
If this value is zero or not set, then MaxMemoryPercentage
cannot be used to calculate the maximum allocation and MaxAlloc
will be used instead.
If set, then this must be a memory size.
Sizes with standard unit suffixes (such as MB
and GiB
) and Kubernetes units (such as M
and Gi
) are supported.
Fractional values with a suffix are supported.
If AvailableMemory
is set, Collections.MaxAlloc
must not be defined.
- Eligible for live reload.
- Type:
memorysize
- Example:
4.5Gb
- Environment variable:
REFINERY_AVAILABLE_MEMORY
- Command line switch:
--available-memory
MaxMemoryPercentage is the maximum percentage of memory that should be allocated by the span collector.
If nonzero, then it must be an integer value between 1 and 100, representing the target maximum percentage of memory that should be allocated by the span collector.
If set to a non-zero value, then once per tick (see SendTicker
) the collector will compare total allocated bytes to this calculated value.
If allocation is too high, then traces will be ejected from the cache early to reduce memory.
Useful values for this setting are generally in the range of 70-90.
- Eligible for live reload.
- Type:
percentage
- Default:
75
- Example:
75
MaxAlloc is the maximum number of bytes that should be allocated by the Collector.
If set, then this must be a memory size.
Sizes with standard unit suffixes (such as MB
and GiB
) and Kubernetes units (such as M
and Gi
) are supported.
Fractional values with a suffix are supported.
See MaxMemoryPercentage
for more details.
If set, Collections.AvailableMemory
must not be defined.
- Eligible for live reload.
- Type:
memorysize
BufferSizes
contains the settings that are relevant to the sizes of communications buffers.
UpstreamBufferSize is the size of the queue used to buffer spans to send to the upstream Collector.
The size of the buffer is measured in spans. If the buffer fills up, then performance will degrade because Refinery will block while waiting for space to become available. If this happens, then you should increase the buffer size.
- Eligible for live reload.
- Type:
int
- Default:
10000
PeerBufferSize is the size of the queue used to buffer spans to send to peer nodes.
The size of the buffer is measured in spans. If the buffer fills up, then performance will degrade because Refinery will block while waiting for space to become available. If this happens, then you should increase this buffer size.
- Eligible for live reload.
- Type:
int
- Default:
100000
Specialized
contains special-purpose configuration options that are not typically needed.
EnvironmentCacheTTL is the duration for which environment information is cached.
This is the amount of time for which Refinery caches environment information, which it looks up from Honeycomb for each different APIKey
.
This information is used when making sampling decisions.
If you have a very large number of environments, then you may want to increase this value.
- Eligible for live reload.
- Type:
duration
- Default:
1h
CompressPeerCommunication determines whether Refinery will compress span data it forwards to peers.
If it costs money to transmit data between Refinery instances (for example, when spread across AWS availability zones), then you almost certainly want compression enabled to reduce your bill. The option to disable it is provided as an escape hatch for deployments that value lower CPU utilization over data transfer costs.
- Not eligible for live reload.
- Type:
bool
- Default:
true
AdditionalAttributes is a map that can be used for injecting user-defined attributes into every span.
For example, it could be used for naming a Refinery cluster. Both keys and values must be strings.
- Eligible for live reload.
- Type:
map
- Example:
ClusterName:MyCluster,environment:production
IDFields
controls the field names to use for the event ID fields.
These fields are used to identify events that are part of the same trace.
TraceNames is the list of field names to use for the trace ID.
The first field in the list that is present in an incoming span will be used as the trace ID. If none of the fields are present, then Refinery treats the span as not being part of a trace and forwards it immediately to Honeycomb.
- Eligible for live reload.
- Type:
stringarray
- Example:
trace.trace_id,traceId
ParentNames is the list of field names to use for the parent ID.
The first field in the list that is present in an event will be used as the parent ID.
A trace without a parent_id
is assumed to be a root span.
- Eligible for live reload.
- Type:
stringarray
- Example:
trace.parent_id,parentId
GRPCServerParameters
controls the parameters of the gRPC server used to receive OpenTelemetry data in gRPC format.
Enabled specifies whether the gRPC server is enabled.
If false
, then the gRPC server is not started and no gRPC traffic is accepted.
- Not eligible for live reload.
- Type:
bool
- Default:
true
ListenAddr is the address Refinery listens to for incoming GRPC OpenTelemetry events.
Incoming traffic is expected to be unencrypted, so if using SSL, then put something like nginx
in front to do the decryption.
- Not eligible for live reload.
- Type:
hostport
- Environment variable:
REFINERY_GRPC_LISTEN_ADDRESS
- Command line switch:
--grpc-listen-address
MaxConnectionIdle is the amount of time to permit an idle connection.
A duration for the amount of time after which an idle connection will be closed by sending a GoAway. "Idle" means that there are no active RPCs. "0s" sets duration to infinity, but this is not recommended for Refinery deployments behind a load balancer, because it will prevent the load balancer from distributing load evenly among peers.
- Not eligible for live reload.
- Type:
duration
- Default:
1m
- Example:
1m
MaxConnectionAge is the maximum amount of time a gRPC connection may exist.
After this duration, the gRPC connection is closed by sending a GoAway
.
A random jitter of +/-10% will be added to MaxConnectionAge
to spread out connection storms.
0s
sets duration to infinity; a value measured in low minutes will help load balancers to distribute load among peers more evenly.
- Not eligible for live reload.
- Type:
duration
- Default:
3m
MaxConnectionAgeGrace is the duration beyond MaxConnectionAge
after which the connection will be forcibly closed.
This setting is in case the upstream node ignores the GoAway
request.
"0s" sets duration to infinity.
- Not eligible for live reload.
- Type:
duration
- Default:
1m
KeepAlive is the duration between keep-alive pings.
After this amount of time, if the client does not see any activity, then it pings the server to see if the transport is still alive. "0s" sets duration to 2 hours.
- Not eligible for live reload.
- Type:
duration
- Default:
1m
KeepAliveTimeout is the duration the server waits for activity on the connection.
This is the amount of time after which if the server does not see any activity, then it pings the client to see if the transport is still alive. "0s" sets duration to 20 seconds.
- Not eligible for live reload.
- Type:
duration
- Default:
20s
MaxSendMsgSize is the maximum message size the server can send.
The server enforces a maximum message size to avoid exhausting the memory available to the process by a single request. The size is expressed in bytes.
- Not eligible for live reload.
- Type:
memorysize
- Default:
5MB
MaxRecvMsgSize is the maximum message size the server can receive.
The server enforces a maximum message size to avoid exhausting the memory available to the process by a single request. The size is expressed in bytes.
- Not eligible for live reload.
- Type:
memorysize
- Default:
5MB
SampleCache
controls the sample cache used to retain information about trace status after the sampling decision has been made.
KeptSize is the number of traces preserved in the cuckoo kept traces cache.
Refinery keeps a record of each trace that was kept and sent to Honeycomb, along with some statistical information.
This is most useful in cases where the trace was sent before sending the root span, so that the root span can be decorated with accurate metadata.
Default is 10_000
traces.
Each trace in this cache consumes roughly 200 bytes.
- Eligible for live reload.
- Type:
int
- Default:
10000
DroppedSize is the size of the cuckoo dropped traces cache.
This cache consumes 4-6 bytes per trace at a scale of millions of traces. Changing its size with live reload sets a future limit, but does not have an immediate effect.
- Eligible for live reload.
- Type:
int
- Default:
1000000
SizeCheckInterval controls how often the cuckoo cache re-evaluates its remaining capacity.
This cache is quite resilient so it does not need to happen very often, but the operation is also inexpensive. Default is 10 seconds.
- Eligible for live reload.
- Type:
duration
- Default:
10s
StressRelief
controls the Stress Relief mechanism, which is used to prevent Refinery from being overwhelmed by a large number of traces.
There is a metric called stress_level
that is emitted as part of Refinery metrics.
It is a measure of Refinery's throughput rate relative to its processing rate, combined with the amount of room in its internal queues, and ranges from 0
to 100
.
stress_level
is generally expected to be 0
except under heavy load.
When stress levels reach 100
, there is an increased chance that Refinery will become unstable.
To avoid this problem, the Stress Relief system can do deterministic sampling on new trace traffic based solely on TraceID
, without having to store traces in the cache or take the time processing sampling rules.
Existing traces in flight will be processed normally, but when Stress Relief is active, trace decisions are made deterministically on a per-span basis; all spans will be sampled according to the SamplingRate
specified here.
Once Stress Relief activates (by exceeding the ActivationLevel
), it will not deactivate until stress_level
falls below the DeactivationLevel
.
When it deactivates, normal trace decisions are made -- and any additional spans that arrive for traces that were active during Stress Relief will respect the decisions made during that time.
The measurement of stress is a lagging indicator and is highly dependent on Refinery configuration and scaling.
Other configuration values should be well tuned first, before adjusting the Stress Relief Activation parameters.
Stress Relief is not a substitute for proper configuration and scaling, but it can be used as a safety valve to prevent Refinery from becoming unstable under heavy load.
Mode is a string indicating how to use Stress Relief.
This setting sets the Stress Relief mode.
"never" means that Stress Relief will never activate.
"monitor" is the recommended setting, and means that Stress Relief will monitor the status of Refinery and activate according to the levels set by fields such as ActivationLevel
.
"always" means that Stress Relief is always on, which may be useful in an emergency situation.
- Eligible for live reload.
- Type:
string
- Default:
never
ActivationLevel is the stress_level
(from 0-100) at which Stress Relief is triggered.
This value must be greater than DeactivationLevel
and should be high enough that it is not reached in normal operation.
- Eligible for live reload.
- Type:
percentage
- Default:
90
DeactivationLevel is the stress_level
(from 0-100) at which Stress Relief is turned off.
This setting is subject to MinimumActivationDuration
.
The value must be less than ActivationLevel
.
- Eligible for live reload.
- Type:
percentage
- Default:
75
SamplingRate is the sampling rate to use when Stress Relief is activated.
All new traces will be deterministically sampled at this rate based only on the traceID
.
It should be chosen to be a rate that sends fewer samples than the average sampling rate Refinery is expected to generate.
For example, if Refinery is configured to normally sample at a rate of 1 in 10, then Stress Relief should be configured to sample at a rate of at least 1 in 30.
- Eligible for live reload.
- Type:
int
- Default:
100
MinimumActivationDuration is the minimum time that Stress Relief will stay enabled once activated.
This setting helps to prevent oscillations.
- Eligible for live reload.
- Type:
duration
- Default:
10s