Skip to content
Permalink
master
Switch branches/tags
Go to file
 
 
Cannot retrieve contributors at this time
layout title permalink sequence manufacturing download_schematic download_layout download_kicad download_gerber download_bom software
start
Getting Started
/
1
true
true
true
true
true
true
name code
Firmware
firmware
name code
WebUSB
webusb

Getting Started

status completed

Step 1

The PCB has 2 battery holder connector holes that can be used to attach the battery holder.

PCB battery connector holes

Put in 3 AA batteries and turn on the switch. The power LED should turn on.

PCB with battery holder

Step 2

Flash the firmware onto the Arduino Zero compatible board with a micro-USB cable.

Web USB setup page

Connect to the serial monitor to see the debug messages.

Serial console

Step 3

Notice that the aircon should turn ON and OFF every 5 seconds as a test.