Permalink
Find file
Fetching contributors…
Cannot retrieve contributors at this time
195 lines (150 sloc) 6.16 KB
# Define the main-project name
project(hyperion)
# define the minimum cmake version (as required by cmake)
cmake_minimum_required(VERSION 2.8)
IF ( POLICY CMP0026 )
CMAKE_POLICY( SET CMP0026 OLD )
ENDIF()
SET ( DEFAULT_AMLOGIC OFF )
SET ( DEFAULT_DISPMANX OFF )
SET ( DEFAULT_FB OFF )
SET ( DEFAULT_OSX OFF )
SET ( DEFAULT_X11 OFF )
SET ( DEFAULT_SPIDEV OFF )
SET ( DEFAULT_WS2812BPWM OFF )
SET ( DEFAULT_WS281XPWM OFF )
SET ( DEFAULT_ZEROCONF OFF )
SET ( DEFAULT_USE_SHARED_AVAHI_LIBS OFF )
if (APPLE)
SET ( DEFAULT_OSX ON )
else ()
if ( "${PLATFORM}" STREQUAL "rpi" )
SET ( DEFAULT_DISPMANX ON )
SET ( DEFAULT_SPIDEV ON )
elseif ( "${PLATFORM}" STREQUAL "rpi-pwm" )
SET ( DEFAULT_DISPMANX ON )
SET ( DEFAULT_WS2812BPWM ON )
SET ( DEFAULT_WS281XPWM ON )
SET ( DEFAULT_SPIDEV ON )
elseif ( "${PLATFORM}" STREQUAL "wetek" )
SET ( DEFAULT_AMLOGIC ON )
SET ( DEFAULT_FB ON )
elseif ( "${PLATFORM}" STREQUAL "x86" )
SET ( DEFAULT_X11 ON )
SET ( DEFAULT_FB ON )
SET ( DEFAULT_USE_SHARED_AVAHI_LIBS ON )
elseif ( "${PLATFORM}" STREQUAL "imx6" )
SET ( DEFAULT_FB ON )
endif()
endif ()
# set the build options
option(ENABLE_ZEROCONF "Enable the avahi/zeroconf announce" ${DEFAULT_ZEROCONF} )
message(STATUS "ENABLE_ZEROCONF = " ${ENABLE_ZEROCONF})
option(ENABLE_AMLOGIC "Enable the AMLOGIC video grabber" ${DEFAULT_AMLOGIC} )
message(STATUS "ENABLE_AMLOGIC = " ${ENABLE_AMLOGIC})
option(ENABLE_DISPMANX "Enable the RPi dispmanx grabber" ${DEFAULT_DISPMANX} )
message(STATUS "ENABLE_DISPMANX = " ${ENABLE_DISPMANX})
option(ENABLE_FB "Enable the framebuffer grabber" ${DEFAULT_FB} )
message(STATUS "ENABLE_FB = " ${ENABLE_FB})
option(ENABLE_OSX "Enable the osx grabber" ${DEFAULT_OSX} )
message(STATUS "ENABLE_OSX = " ${ENABLE_OSX})
option(ENABLE_SPIDEV "Enable the SPIDEV device" ${DEFAULT_SPIDEV} )
message(STATUS "ENABLE_SPIDEV = " ${ENABLE_SPIDEV})
option(ENABLE_TINKERFORGE "Enable the TINKERFORGE device" ON)
message(STATUS "ENABLE_TINKERFORGE = " ${ENABLE_TINKERFORGE})
option(ENABLE_V4L2 "Enable the V4L2 grabber" ON)
message(STATUS "ENABLE_V4L2 = " ${ENABLE_V4L2})
option(ENABLE_WS2812BPWM "Enable the WS2812b-PWM device" ${DEFAULT_WS2812BPWM} )
message(STATUS "ENABLE_WS2812BPWM = " ${ENABLE_WS2812BPWM})
option(ENABLE_WS281XPWM "Enable the WS281x-PWM device" ${DEFAULT_WS281XPWM} )
message(STATUS "ENABLE_WS281XPWM = " ${ENABLE_WS281XPWM})
option(ENABLE_X11 "Enable the X11 grabber" ${DEFAULT_X11})
message(STATUS "ENABLE_X11 = " ${ENABLE_X11})
option(ENABLE_QT5 "Enable QT5" OFF)
message(STATUS "ENABLE_QT5 = " ${ENABLE_QT5})
option(ENABLE_TESTS "Compile additional test applications" OFF)
message(STATUS "ENABLE_TESTS = " ${ENABLE_TESTS})
option(ENABLE_PROFILER "enable profiler capabilities - not for release code" OFF)
message(STATUS "ENABLE_PROFILER = " ${ENABLE_PROFILER})
if(ENABLE_FB AND ENABLE_DISPMANX)
message(FATAL_ERROR "dispmanx grabber and framebuffer grabber cannot be used at the same time")
endif()
if(ENABLE_FB AND ENABLE_OSX)
message(FATAL_ERROR "osx grabber and framebuffer grabber cannot be used at the same time")
endif()
if(ENABLE_OSX AND ENABLE_DISPMANX)
message(FATAL_ERROR "dispmanx grabber and osx grabber cannot be used at the same time")
endif()
SET ( PROTOBUF_INSTALL_BIN_DIR ${CMAKE_BINARY_DIR}/proto )
SET ( PROTOBUF_INSTALL_LIB_DIR ${CMAKE_BINARY_DIR}/proto )
#if(ENABLE_QT5)
# TODO vs ENABLE_QT4?
#endif(ENABLE_QT5)
# Createt the configuration file
# Add project specific cmake modules (find, etc)
set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} ${CMAKE_CURRENT_SOURCE_DIR}/cmake)
find_package(GitVersion)
# configure a header file to pass some of the CMake settings
# to the source code
configure_file("${PROJECT_SOURCE_DIR}/HyperionConfig.h.in" "${PROJECT_BINARY_DIR}/HyperionConfig.h")
include_directories("${PROJECT_BINARY_DIR}")
if( NOT ENABLE_QT5)
#ADD_DEFINITIONS ( -DENABLE_QT5 )
#find_package(Qt5Widgets)
#else()
# Add specific cmake modules to find qt4 (default version finds first available QT which might not be qt4)
set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} ${CMAKE_CURRENT_SOURCE_DIR}/cmake/qt4)
endif()
# Define the global output path of binaries
SET(LIBRARY_OUTPUT_PATH ${PROJECT_BINARY_DIR}/lib)
SET(EXECUTABLE_OUTPUT_PATH ${PROJECT_BINARY_DIR}/bin)
file(MAKE_DIRECTORY ${LIBRARY_OUTPUT_PATH})
file(MAKE_DIRECTORY ${EXECUTABLE_OUTPUT_PATH})
# Add the project include directory as additional include path
include_directories(${CMAKE_SOURCE_DIR}/dependencies/include)
include_directories(${CMAKE_SOURCE_DIR}/include)
# Prefer static linking over dynamic
#set(CMAKE_FIND_LIBRARY_SUFFIXES ".a;.so")
# enable C++11
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++0x -Wall")
#set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -stdlib=libc++ -std=c++11 -Wall")
if(ENABLE_QT5)
#find_package(Qt5Core REQUIRED)
find_package(Qt5 COMPONENTS Core Gui Widgets Network REQUIRED)
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${Qt5Widgets_EXECUTABLE_COMPILE_FLAGS}")
# set(CMAKE_CXX_FLAGS "-fPIC")
else()
# Configure the use of QT4
find_package(Qt4 COMPONENTS QtCore QtNetwork QtGui REQUIRED QUIET)
endif()
#add libusb and pthreads
find_package(libusb-1.0 REQUIRED)
find_package(Threads REQUIRED)
if(ENABLE_QT5)
#include(${QT_USE_FILE})
add_definitions(${QT_DEFINITIONS})
else()
include(${QT_USE_FILE})
add_definitions(${QT_DEFINITIONS})
endif()
# TODO[TvdZ]: This linking directory should only be added if we are cross compiling
if(NOT APPLE)
link_directories(${CMAKE_FIND_ROOT_PATH}/lib/arm-linux-gnueabihf)
endif()
if(ENABLE_OSX)
set(CMAKE_EXE_LINKER_FLAGS "-framework CoreGraphics")
endif()
# Add the source/lib directories
add_subdirectory(dependencies)
add_subdirectory(libsrc)
add_subdirectory(src)
if (ENABLE_TESTS)
add_subdirectory(test)
endif ()
# Add the doxygen generation directory
add_subdirectory(doc)
# uninstall target
configure_file( "${CMAKE_CURRENT_SOURCE_DIR}/cmake/cmake_uninstall.cmake.in" "${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake" IMMEDIATE @ONLY)
add_custom_target(uninstall COMMAND ${CMAKE_COMMAND} -P ${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake)
# enable make package - no code after this line !
include (${CMAKE_CURRENT_SOURCE_DIR}/cmake/packages.cmake)