Permalink
Find file
Fetching contributors…
Cannot retrieve contributors at this time
83 lines (65 sloc) 2.97 KB
#!/bin/bash
#Updated: 13 March 2016, by TPmodding
#Just use a clean Ubunut 14.04 and run this script
##############
#ON TARGET
#--------------
#sudo apt-get install libQt4-dev libusb-1.0-0-dev python-dev rsync
#############
#ON HOST
#---------
sudo apt-get update
sudo apt-get upgrade
#TO-DO verify what is really required
sudo apt-get install git rsync cmake build-essential libQt4-dev libusb-1.0-0-dev python-dev libxrender-dev protobuf-compiler lib32z1 lib32ncurses5 lib32bz2-1.0 zlib1g-dev
echo 'PATH=$PATH:$HOME/raspberrypi/tools/arm-bcm2708/gcc-linaro-arm-linux-gnueabihf-raspbian/bin' >> .bashrc
#---------
export TARGET_IP=192.168.0.103
export TARGET_USER=pi
export RASCROSS_DIR="$HOME/raspberrypi"
export ROOTFS_DIR="$RASCROSS_DIR/rootfs"
export HYPERION_DIR="$HOME/hyperion"
#export IMX6_DIR="$HOME/hummingboard"
export TOOLCHAIN_FILE="$HYPERION_DIR/Toolchain-RaspberryPi.cmake"
export NATIVE_BUILD_DIR="$HYPERION_DIR/build"
export TARGET_BUILD_DIR="$HYPERION_DIR/build-rpi"
mkdir -p "$ROOTFS_DIR"
rsync -rl --delete-after --copy-unsafe-links $TARGET_USER@$TARGET_IP:/{lib,usr} "$ROOTFS_DIR"
######## RPi specific #########
mkdir -p "$RASCROSS_DIR/firmware"
git clone https://github.com/raspberrypi/firmware.git "$RASCROSS_DIR/firmware"
ln -s "$RASCROSS_DIR/firmware/hardfp/opt" "$ROOTFS_DIR/opt"
git clone git://github.com/raspberrypi/tools.git "$RASCROSS_DIR/tools"
##### End of RPi specific ######
######## NOT TESTED ONLY INFOs #########
######## IMX6 specific #########
#export IMX6_DIR="$HOME/hummingboard"
#mkdir -p "$IMX6_Dir"
#cd "$IMX6_Dir"
#wget https://launchpad.net/linaro-toolchain-binaries/trunk/2013.10/+download/gcc-linaro-arm-linux-gnueabihf-4.8-2013.10_linux.tar.bz2
#tar -xvjf gcc-linaro-arm-linux-gnueabihf-4.8-2013.10_linux.tar.bz2
#cd
##### End of IMX6 specific ######
######## NOT TESTED #########
# get the Hyperion sources
git clone --recursive https://github.com/tvdzwan/hyperion.git "$HYPERION_DIR"
# do a native build (to build the protobuf compiler for the native platform)
mkdir -p "$NATIVE_BUILD_DIR"
cmake -DENABLE_DISPMANX=OFF --build "$NATIVE_BUILD_DIR" "$HYPERION_DIR"
# do the cross build
# specify the protoc export file to import the protobuf compiler from the native build
mkdir -p "$TARGET_BUILD_DIR"
cmake -DCMAKE_TOOLCHAIN_FILE="$TOOLCHAIN_FILE" -DIMPORT_PROTOC=$NATIVE_BUILD_DIR/protoc_export.cmake --build "$TARGET_BUILD_DIR" "$HYPERION_DIR"
#compile
cd "$HYPERION_DIR/deploy"
rm -rf hummingboard_prerelease.tar.gz hyperion.deps.openelec-imx6.tar.gz hyperion.deps.openelec-rpi.tar.gz hyperion_imx6.tar.gz hyperion_rpi.tar.gz hyperion_wetek.tar.gz hyperion_x32.tar.gz hyperion_x64.tar.gz
cd
cd "$HYPERION_DIR/bin"
chmod +x *
cp "$HYPERION_DIR/bin/create_all_releases.sh" "$HYPERION_DIR"
cd "$HYPERION_DIR"
./create_all_releases.sh
######END
#------------------------------------------------------------------------------
#These instructions are based on tvdzwan and on the guide given by:
#http://airwiki.ws.dei.polimi.it/index.php/Cross-compiling_for_the_RaspberryPi