Convert KiCAD rpt files to G-Code to dispense solder paste
Switch branches/tags
Nothing to show
Clone or download
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Failed to load latest commit information.
img
Makefile
README.md
bumps.rpt
main.cc
optimizer.cc
rpt-parser.cc
rpt-parser.h
rpt2paste.h

README.md

Note, this project is now superseded by https://github.com/hzeller/rpt2pnp which does solder dispensing as well as pick and placing

KiCAD RPT file to G-Code for didspensing solder paste.

There are probably better ways. This is mostly experimental, working with a solder-paste dispenser hooked up to the fan-output of https://github.com/jerkey 's Type-A 3D printer.

The bumps.rpt file is for testing, created from https://github.com/hzeller/bumps project.

lead solder paste (zephpaste), 27gauge needle (grey), 60 PSI, -d 250 -D 3024 lead solder paste (zephpaste), 0.78mm needle (teal), 60 PSI, -d 235.40 -D 132.74

Postscript Output