LoRa Module for Arduino, Raspberry Pi, PC, Mac,
Switch branches/tags
Nothing to show
Clone or download
powenko fix
TypeError: unsupported operand type(s) for ^: 'int' and 'str'
Latest commit 1b774eb May 14, 2018
Type Name Latest commit message Commit time
Failed to load latest commit information.
Demos_sourceCode add Arduino controls LED via LoRa sample Code May 9, 2017
LoRa-Gateway updated Jun 5, 2017
Sample-Java english data sheets Mar 26, 2018
Samples-Arduino update Mar 9, 2018
Samples-Python fix May 14, 2018
hardwareSpacs updated Mar 26, 2018
README.md update Aug 5, 2016


IL-LORA1272 is for ifroglab LoRa module development sample code and tools.

IL-LORA1272 is ifroglab product, please see http://www.ifroglab.com/?p=7086

iFrogLab Lora 868/900/915 MHz SX1272 module compatible


*. Frequency Range: 868/900/915MHz.
*. Modulation: FSK/GFSK/MSK/LoRa.
*. SPI Data Interface Sensitivity: -137dBm.
*. Output Power: +20dBm Data Rate: <300 kbps 127dB dynamic Range RSSI Excellent blocking immunity Preamble detection Automatic RF sense and CAD monitor Built-in bit synchronizer for clock recovery Packet engine up to 256 bytes with CRC.
*. Working Temperature: -40°C +80°C Build-in temperature sensor.
*. Standby current: ≤ 1uA.
*. Supply voltage: 1.8


iL-LORA1272 is a type of low cost RF front-end transceiver module based on SX1272 from Semtech Corporation. It keeps the advantages of RFIC SX1272 but simplifies the circuit design. The high sensitivity (-137dBm) in LoRa modulation and 20dBm high power output make the module suitable for low range and low data rate applications.

iL-LORA1272 module consists of RFIC SX1272 and include powerful MCU, thin SMD crystal and antenna matching circuit. The antenna port is well matched to standard 50 Ohm impedance. Users don’t need to spend time in RF circuit design and choose suitable antennas for different applications. iL-LORA1272 operates at 1.8~3.6V with extra low standby current which makes it suitable for battery powered-up applications. Because iL-LORA1272 is purely hardware module and it adopts ±10ppm crystal which the resolution of it places a important role in calculating spreading factor, bandwidth, etc.

In addition, We’er add powerful MCU to help Users that don’t needs to read the datasheet of SX1272, you just go through UART to control this module and will easy to use the module in the best performance.



Where to buy?