Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

F405 wing. RTL fault #4823

Open
letruong6006 opened this issue Jun 11, 2019 · 3 comments

Comments

Projects
None yet
3 participants
@letruong6006
Copy link

commented Jun 11, 2019

I am using the latest INAV version for the F405 wing. in RTL mode. The plane flew in the circle above, I noticed that the plane flew about 5-6 loops above, the altitude dropped quite significantly and the radius was quite different from the settings, I installed the height of 120m and the radius of 50m . Throttle is about 30-40%, it flies quite fast, it is only accurate on the first flight above me, GPS is quite stable about 20 satellites, I use GPS BN280, my plane crashed into the bush because of the degree too low. Can someone help me?

@issue-label-bot issue-label-bot bot added the BUG label Jun 11, 2019

@issue-label-bot

This comment has been minimized.

Copy link

commented Jun 11, 2019

Issue-Label Bot is automatically applying the label BUG to this issue, with a confidence of 0.73. Please mark this comment with 👍 or 👎 to give our bot feedback!

Links: app homepage, dashboard and code for this bot.

@Jetrell

This comment has been minimized.

Copy link

commented Jun 11, 2019

@letruong6006 At a guess, with out seeing your Diff files.
Do you have - nav_rth_home_altitude set to a reasonable value?

If its set to zero, it will loiter at the nav_rth_altitude. But if it is set to something very low like 5mtrs. Then it will descend and most likely hit the ground.
Remember these CLI values are in Centimeters and not Meters.

@digitalentity digitalentity added Support and removed BUG labels Jun 11, 2019

@letruong6006

This comment has been minimized.

Copy link
Author

commented Jun 12, 2019

@ letruong6006 Theo phỏng đoán, không cần nhìn thấy các tệp Diff của bạn.
Bạn có - nav_rth_home_altitudethiết lập một giá trị hợp lý?
Nếu nó được đặt thành zero, nó sẽ loiter tại nav_rth_altitude. Nhưng nếu nó được đặt ở mức rất thấp như 5 triệu. Sau đó, nó sẽ hạ xuống và rất có thể sẽ chạm đất.
Hãy nhớ các giá trị CLI này được tính bằng centimet chứ không phải là mét.

I setup nav_rth_home_altitude = 12000cm.
The incident does not occur regularly

@letruong6006 letruong6006 reopened this Jun 12, 2019

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
You can’t perform that action at this time.