Skip to content
Permalink
Branch: master
Find file Copy path
Find file Copy path
Fetching contributors…
Cannot retrieve contributors at this time
102 lines (79 sloc) 3.61 KB
/* Copyright (c) 2005 Anatoly Sokolov
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in
the documentation and/or other materials provided with the
distribution.
* Neither the name of the copyright holders nor the names of
contributors may be used to endorse or promote products derived
from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE. */
/* $Id */
/* avr/iom2561.h - definitions for ATmega2561 */
#ifndef _AVR_IOM2561_H_
#define _AVR_IOM2561_H_ 1
#include "iomxx0_1.h"
/* Constants */
#define SPM_PAGESIZE 256
#define RAMSTART 0x200
#define RAMEND 0x21FF
#define XRAMEND 0xFFFF
#define E2END 0xFFF
#define E2PAGESIZE 8
#define FLASHEND 0x3FFFF
/* Fuses */
#define FUSE_MEMORY_SIZE 3
/* Low Fuse Byte */
#define FUSE_CKSEL0 (unsigned char)~_BV(0)
#define FUSE_CKSEL1 (unsigned char)~_BV(1)
#define FUSE_CKSEL2 (unsigned char)~_BV(2)
#define FUSE_CKSEL3 (unsigned char)~_BV(3)
#define FUSE_SUT0 (unsigned char)~_BV(4)
#define FUSE_SUT1 (unsigned char)~_BV(5)
#define FUSE_CKOUT (unsigned char)~_BV(6)
#define FUSE_CKDIV8 (unsigned char)~_BV(7)
#define LFUSE_DEFAULT (FUSE_CKSEL0 & FUSE_CKSEL2 & FUSE_CKSEL3 & FUSE_SUT0 & FUSE_CKDIV8)
/* High Fuse Byte */
#define FUSE_BOOTRST (unsigned char)~_BV(0)
#define FUSE_BOOTSZ0 (unsigned char)~_BV(1)
#define FUSE_BOOTSZ1 (unsigned char)~_BV(2)
#define FUSE_EESAVE (unsigned char)~_BV(3)
#define FUSE_WDTON (unsigned char)~_BV(4)
#define FUSE_SPIEN (unsigned char)~_BV(5)
#define FUSE_JTAGEN (unsigned char)~_BV(6)
#define FUSE_OCDEN (unsigned char)~_BV(7)
#define HFUSE_DEFAULT (FUSE_BOOTSZ0 & FUSE_BOOTSZ1 & FUSE_SPIEN & FUSE_JTAGEN)
/* Extended Fuse Byte */
#define FUSE_BODLEVEL0 (unsigned char)~_BV(0)
#define FUSE_BODLEVEL1 (unsigned char)~_BV(1)
#define FUSE_BODLEVEL2 (unsigned char)~_BV(2)
#define EFUSE_DEFAULT (0xFF)
/* Lock Bits */
#define __LOCK_BITS_EXIST
#define __BOOT_LOCK_BITS_0_EXIST
#define __BOOT_LOCK_BITS_1_EXIST
/* Signature */
#define SIGNATURE_0 0x1E
#define SIGNATURE_1 0x98
#define SIGNATURE_2 0x02
#define SLEEP_MODE_IDLE (0x00<<1)
#define SLEEP_MODE_ADC (0x01<<1)
#define SLEEP_MODE_PWR_DOWN (0x02<<1)
#define SLEEP_MODE_PWR_SAVE (0x03<<1)
#define SLEEP_MODE_STANDBY (0x06<<1)
#define SLEEP_MODE_EXT_STANDBY (0x07<<1)
#endif /* _AVR_IOM2561_H_ */
You can’t perform that action at this time.