Skip to content
Permalink
Branch: master
Find file Copy path
Find file Copy path
Fetching contributors…
Cannot retrieve contributors at this time
472 lines (394 sloc) 20.4 KB
;; -*- mode: emacs-lisp; lexical-binding: t -*-
;; This file is loaded by Spacemacs at startup.
;; It must be stored in your home directory.
(defun dotspacemacs/layers ()
"Layer configuration:
This function should only modify configuration layer settings."
(setq-default
;; Base distribution to use. This is a layer contained in the directory
;; `+distribution'. For now available distributions are `spacemacs-base'
;; or `spacemacs'. (default 'spacemacs)
dotspacemacs-distribution 'spacemacs
;; Lazy installation of layers (i.e. layers are installed only when a file
;; with a supported type is opened). Possible values are `all', `unused'
;; and `nil'. `unused' will lazy install only unused layers (i.e. layers
;; not listed in variable `dotspacemacs-configuration-layers'), `all' will
;; lazy install any layer that support lazy installation even the layers
;; listed in `dotspacemacs-configuration-layers'. `nil' disable the lazy
;; installation feature and you have to explicitly list a layer in the
;; variable `dotspacemacs-configuration-layers' to install it.
;; (default 'unused)
dotspacemacs-enable-lazy-installation 'unused
;; If non-nil then Spacemacs will ask for confirmation before installing
;; a layer lazily. (default t)
dotspacemacs-ask-for-lazy-installation t
;; List of additional paths where to look for configuration layers.
;; Paths must have a trailing slash (i.e. `~/.mycontribs/')
dotspacemacs-configuration-layer-path '()
;; List of configuration layers to load.
dotspacemacs-configuration-layers
'(
;; ----------------------------------------------------------------
;; Example of useful layers you may want to use right away.
;; Uncomment some layer names and press `SPC f e R' (Vim style) or
;; `M-m f e R' (Emacs style) to install them.
;; ----------------------------------------------------------------
;; auto-completion
;; better-defaults
emacs-lisp
;; git
helm
;; lsp
;; markdown
multiple-cursors
;; org
;; (shell :variables
;; shell-default-height 30
;; shell-default-position 'bottom)
;; spell-checking
;; syntax-checking
treemacs
;; version-control
)
;; List of additional packages that will be installed without being
;; wrapped in a layer. If you need some configuration for these
;; packages, then consider creating a layer. You can also put the
;; configuration in `dotspacemacs/user-config'.
;; To use a local version of a package, use the `:location' property:
;; '(your-package :location "~/path/to/your-package/")
;; Also include the dependencies as they will not be resolved automatically.
dotspacemacs-additional-packages '()
;; A list of packages that cannot be updated.
dotspacemacs-frozen-packages '()
;; A list of packages that will not be installed and loaded.
dotspacemacs-excluded-packages '()
;; Defines the behaviour of Spacemacs when installing packages.
;; Possible values are `used-only', `used-but-keep-unused' and `all'.
;; `used-only' installs only explicitly used packages and deletes any unused
;; packages as well as their unused dependencies. `used-but-keep-unused'
;; installs only the used packages but won't delete unused ones. `all'
;; installs *all* packages supported by Spacemacs and never uninstalls them.
;; (default is `used-only')
dotspacemacs-install-packages 'used-only))
(defun dotspacemacs/init ()
"Initialization:
This function is called at the very beginning of Spacemacs startup,
before layer configuration.
It should only modify the values of Spacemacs settings."
;; This setq-default sexp is an exhaustive list of all the supported
;; spacemacs settings.
(setq-default
;; If non-nil then enable support for the portable dumper. You'll need
;; to compile Emacs 27 from source following the instructions in file
;; EXPERIMENTAL.org at to root of the git repository.
;; (default nil)
dotspacemacs-enable-emacs-pdumper nil
;; Name of executable file pointing to emacs 27+. This executable must be
;; in your PATH.
;; (default "emacs")
dotspacemacs-emacs-pdumper-executable-file "emacs"
;; Name of the Spacemacs dump file. This is the file will be created by the
;; portable dumper in the cache directory under dumps sub-directory.
;; To load it when starting Emacs add the parameter `--dump-file'
;; when invoking Emacs 27.1 executable on the command line, for instance:
;; ./emacs --dump-file=~/.emacs.d/.cache/dumps/spacemacs.pdmp
;; (default spacemacs.pdmp)
dotspacemacs-emacs-dumper-dump-file "spacemacs.pdmp"
;; If non-nil ELPA repositories are contacted via HTTPS whenever it's
;; possible. Set it to nil if you have no way to use HTTPS in your
;; environment, otherwise it is strongly recommended to let it set to t.
;; This variable has no effect if Emacs is launched with the parameter
;; `--insecure' which forces the value of this variable to nil.
;; (default t)
dotspacemacs-elpa-https t
;; Maximum allowed time in seconds to contact an ELPA repository.
;; (default 5)
dotspacemacs-elpa-timeout 5
;; Set `gc-cons-threshold' and `gc-cons-percentage' when startup finishes.
;; This is an advanced option and should not be changed unless you suspect
;; performance issues due to garbage collection operations.
;; (default '(100000000 0.1))
dotspacemacs-gc-cons '(100000000 0.1)
;; If non-nil then Spacelpa repository is the primary source to install
;; a locked version of packages. If nil then Spacemacs will install the
;; latest version of packages from MELPA. (default nil)
dotspacemacs-use-spacelpa nil
;; If non-nil then verify the signature for downloaded Spacelpa archives.
;; (default t)
dotspacemacs-verify-spacelpa-archives t
;; If non-nil then spacemacs will check for updates at startup
;; when the current branch is not `develop'. Note that checking for
;; new versions works via git commands, thus it calls GitHub services
;; whenever you start Emacs. (default nil)
dotspacemacs-check-for-update nil
;; If non-nil, a form that evaluates to a package directory. For example, to
;; use different package directories for different Emacs versions, set this
;; to `emacs-version'. (default 'emacs-version)
dotspacemacs-elpa-subdirectory 'emacs-version
;; One of `vim', `emacs' or `hybrid'.
;; `hybrid' is like `vim' except that `insert state' is replaced by the
;; `hybrid state' with `emacs' key bindings. The value can also be a list
;; with `:variables' keyword (similar to layers). Check the editing styles
;; section of the documentation for details on available variables.
;; (default 'vim)
dotspacemacs-editing-style 'vim
;; Specify the startup banner. Default value is `official', it displays
;; the official spacemacs logo. An integer value is the index of text
;; banner, `random' chooses a random text banner in `core/banners'
;; directory. A string value must be a path to an image format supported
;; by your Emacs build.
;; If the value is nil then no banner is displayed. (default 'official)
dotspacemacs-startup-banner 'official
;; List of items to show in startup buffer or an association list of
;; the form `(list-type . list-size)`. If nil then it is disabled.
;; Possible values for list-type are:
;; `recents' `bookmarks' `projects' `agenda' `todos'.
;; List sizes may be nil, in which case
;; `spacemacs-buffer-startup-lists-length' takes effect.
dotspacemacs-startup-lists '((recents . 5)
(projects . 7))
;; True if the home buffer should respond to resize events. (default t)
dotspacemacs-startup-buffer-responsive t
;; Default major mode for a new empty buffer. Possible values are mode
;; names such as `text-mode'; and `nil' to use Fundamental mode.
;; (default `text-mode')
dotspacemacs-new-empty-buffer-major-mode 'text-mode
;; Default major mode of the scratch buffer (default `text-mode')
dotspacemacs-scratch-mode 'text-mode
;; Initial message in the scratch buffer, such as "Welcome to Spacemacs!"
;; (default nil)
dotspacemacs-initial-scratch-message nil
;; List of themes, the first of the list is loaded when spacemacs starts.
;; Press `SPC T n' to cycle to the next theme in the list (works great
;; with 2 themes variants, one dark and one light)
dotspacemacs-themes '(spacemacs-dark
spacemacs-light)
;; Set the theme for the Spaceline. Supported themes are `spacemacs',
;; `all-the-icons', `custom', `doom', `vim-powerline' and `vanilla'. The
;; first three are spaceline themes. `doom' is the doom-emacs mode-line.
;; `vanilla' is default Emacs mode-line. `custom' is a user defined themes,
;; refer to the DOCUMENTATION.org for more info on how to create your own
;; spaceline theme. Value can be a symbol or list with additional properties.
;; (default '(spacemacs :separator wave :separator-scale 1.5))
dotspacemacs-mode-line-theme '(spacemacs :separator wave :separator-scale 1.5)
;; If non-nil the cursor color matches the state color in GUI Emacs.
;; (default t)
dotspacemacs-colorize-cursor-according-to-state t
;; Default font or prioritized list of fonts.
dotspacemacs-default-font '("Source Code Pro"
:size 10.0
:weight normal
:width normal)
;; The leader key (default "SPC")
dotspacemacs-leader-key "SPC"
;; The key used for Emacs commands `M-x' (after pressing on the leader key).
;; (default "SPC")
dotspacemacs-emacs-command-key "SPC"
;; The key used for Vim Ex commands (default ":")
dotspacemacs-ex-command-key ":"
;; The leader key accessible in `emacs state' and `insert state'
;; (default "M-m")
dotspacemacs-emacs-leader-key "M-m"
;; Major mode leader key is a shortcut key which is the equivalent of
;; pressing `<leader> m`. Set it to `nil` to disable it. (default ",")
dotspacemacs-major-mode-leader-key ","
;; Major mode leader key accessible in `emacs state' and `insert state'.
;; (default "C-M-m")
dotspacemacs-major-mode-emacs-leader-key "C-M-m"
;; These variables control whether separate commands are bound in the GUI to
;; the key pairs `C-i', `TAB' and `C-m', `RET'.
;; Setting it to a non-nil value, allows for separate commands under `C-i'
;; and TAB or `C-m' and `RET'.
;; In the terminal, these pairs are generally indistinguishable, so this only
;; works in the GUI. (default nil)
dotspacemacs-distinguish-gui-tab nil
;; Name of the default layout (default "Default")
dotspacemacs-default-layout-name "Default"
;; If non-nil the default layout name is displayed in the mode-line.
;; (default nil)
dotspacemacs-display-default-layout nil
;; If non-nil then the last auto saved layouts are resumed automatically upon
;; start. (default nil)
dotspacemacs-auto-resume-layouts nil
;; If non-nil, auto-generate layout name when creating new layouts. Only has
;; effect when using the "jump to layout by number" commands. (default nil)
dotspacemacs-auto-generate-layout-names nil
;; Size (in MB) above which spacemacs will prompt to open the large file
;; literally to avoid performance issues. Opening a file literally means that
;; no major mode or minor modes are active. (default is 1)
dotspacemacs-large-file-size 1
;; Location where to auto-save files. Possible values are `original' to
;; auto-save the file in-place, `cache' to auto-save the file to another
;; file stored in the cache directory and `nil' to disable auto-saving.
;; (default 'cache)
dotspacemacs-auto-save-file-location 'cache
;; Maximum number of rollback slots to keep in the cache. (default 5)
dotspacemacs-max-rollback-slots 5
;; If non-nil, the paste transient-state is enabled. While enabled, after you
;; paste something, pressing `C-j' and `C-k' several times cycles through the
;; elements in the `kill-ring'. (default nil)
dotspacemacs-enable-paste-transient-state nil
;; Which-key delay in seconds. The which-key buffer is the popup listing
;; the commands bound to the current keystroke sequence. (default 0.4)
dotspacemacs-which-key-delay 0.4
;; Which-key frame position. Possible values are `right', `bottom' and
;; `right-then-bottom'. right-then-bottom tries to display the frame to the
;; right; if there is insufficient space it displays it at the bottom.
;; (default 'bottom)
dotspacemacs-which-key-position 'bottom
;; Control where `switch-to-buffer' displays the buffer. If nil,
;; `switch-to-buffer' displays the buffer in the current window even if
;; another same-purpose window is available. If non-nil, `switch-to-buffer'
;; displays the buffer in a same-purpose window even if the buffer can be
;; displayed in the current window. (default nil)
dotspacemacs-switch-to-buffer-prefers-purpose nil
;; If non-nil a progress bar is displayed when spacemacs is loading. This
;; may increase the boot time on some systems and emacs builds, set it to
;; nil to boost the loading time. (default t)
dotspacemacs-loading-progress-bar t
;; If non-nil the frame is fullscreen when Emacs starts up. (default nil)
;; (Emacs 24.4+ only)
dotspacemacs-fullscreen-at-startup nil
;; If non-nil `spacemacs/toggle-fullscreen' will not use native fullscreen.
;; Use to disable fullscreen animations in OSX. (default nil)
dotspacemacs-fullscreen-use-non-native nil
;; If non-nil the frame is maximized when Emacs starts up.
;; Takes effect only if `dotspacemacs-fullscreen-at-startup' is nil.
;; (default nil) (Emacs 24.4+ only)
dotspacemacs-maximized-at-startup nil
;; If non-nil the frame is undecorated when Emacs starts up. Combine this
;; variable with `dotspacemacs-maximized-at-startup' in OSX to obtain
;; borderless fullscreen. (default nil)
dotspacemacs-undecorated-at-startup nil
;; A value from the range (0..100), in increasing opacity, which describes
;; the transparency level of a frame when it's active or selected.
;; Transparency can be toggled through `toggle-transparency'. (default 90)
dotspacemacs-active-transparency 90
;; A value from the range (0..100), in increasing opacity, which describes
;; the transparency level of a frame when it's inactive or deselected.
;; Transparency can be toggled through `toggle-transparency'. (default 90)
dotspacemacs-inactive-transparency 90
;; If non-nil show the titles of transient states. (default t)
dotspacemacs-show-transient-state-title t
;; If non-nil show the color guide hint for transient state keys. (default t)
dotspacemacs-show-transient-state-color-guide t
;; If non-nil unicode symbols are displayed in the mode line.
;; If you use Emacs as a daemon and wants unicode characters only in GUI set
;; the value to quoted `display-graphic-p'. (default t)
dotspacemacs-mode-line-unicode-symbols t
;; If non-nil smooth scrolling (native-scrolling) is enabled. Smooth
;; scrolling overrides the default behavior of Emacs which recenters point
;; when it reaches the top or bottom of the screen. (default t)
dotspacemacs-smooth-scrolling t
;; Control line numbers activation.
;; If set to `t', `relative' or `visual' then line numbers are enabled in all
;; `prog-mode' and `text-mode' derivatives. If set to `relative', line
;; numbers are relative. If set to `visual', line numbers are also relative,
;; but lines are only visual lines are counted. For example, folded lines
;; will not be counted and wrapped lines are counted as multiple lines.
;; This variable can also be set to a property list for finer control:
;; '(:relative nil
;; :visual nil
;; :disabled-for-modes dired-mode
;; doc-view-mode
;; markdown-mode
;; org-mode
;; pdf-view-mode
;; text-mode
;; :size-limit-kb 1000)
;; When used in a plist, `visual' takes precedence over `relative'.
;; (default nil)
dotspacemacs-line-numbers nil
;; Code folding method. Possible values are `evil' and `origami'.
;; (default 'evil)
dotspacemacs-folding-method 'evil
;; If non-nil `smartparens-strict-mode' will be enabled in programming modes.
;; (default nil)
dotspacemacs-smartparens-strict-mode nil
;; If non-nil pressing the closing parenthesis `)' key in insert mode passes
;; over any automatically added closing parenthesis, bracket, quote, etc...
;; This can be temporary disabled by pressing `C-q' before `)'. (default nil)
dotspacemacs-smart-closing-parenthesis nil
;; Select a scope to highlight delimiters. Possible values are `any',
;; `current', `all' or `nil'. Default is `all' (highlight any scope and
;; emphasis the current one). (default 'all)
dotspacemacs-highlight-delimiters 'all
;; If non-nil, start an Emacs server if one is not already running.
;; (default nil)
dotspacemacs-enable-server t
;; Set the emacs server socket location.
;; If nil, uses whatever the Emacs default is, otherwise a directory path
;; like \"~/.emacs.d/server\". It has no effect if
;; `dotspacemacs-enable-server' is nil.
;; (default nil)
dotspacemacs-server-socket-dir nil
;; If non-nil, advise quit functions to keep server open when quitting.
;; (default nil)
dotspacemacs-persistent-server nil
;; List of search tool executable names. Spacemacs uses the first installed
;; tool of the list. Supported tools are `rg', `ag', `pt', `ack' and `grep'.
;; (default '("rg" "ag" "pt" "ack" "grep"))
dotspacemacs-search-tools '("rg" "ag" "pt" "ack" "grep")
;; Format specification for setting the frame title.
;; %a - the `abbreviated-file-name', or `buffer-name'
;; %t - `projectile-project-name'
;; %I - `invocation-name'
;; %S - `system-name'
;; %U - contents of $USER
;; %b - buffer name
;; %f - visited file name
;; %F - frame name
;; %s - process status
;; %p - percent of buffer above top of window, or Top, Bot or All
;; %P - percent of buffer above bottom of window, perhaps plus Top, or Bot or All
;; %m - mode name
;; %n - Narrow if appropriate
;; %z - mnemonics of buffer, terminal, and keyboard coding systems
;; %Z - like %z, but including the end-of-line format
;; (default "%I@%S")
dotspacemacs-frame-title-format "%I@%S"
;; Format specification for setting the icon title format
;; (default nil - same as frame-title-format)
dotspacemacs-icon-title-format nil
;; Delete whitespace while saving buffer. Possible values are `all'
;; to aggressively delete empty line and long sequences of whitespace,
;; `trailing' to delete only the whitespace at end of lines, `changed' to
;; delete only whitespace for changed lines or `nil' to disable cleanup.
;; (default nil)
dotspacemacs-whitespace-cleanup nil
;; Either nil or a number of seconds. If non-nil zone out after the specified
;; number of seconds. (default nil)
dotspacemacs-zone-out-when-idle nil
;; Run `spacemacs/prettify-org-buffer' when
;; visiting README.org files of Spacemacs.
;; (default nil)
dotspacemacs-pretty-docs nil))
(defun dotspacemacs/user-env ()
"Environment variables setup.
This function defines the environment variables for your Emacs session. By
default it calls `spacemacs/load-spacemacs-env' which loads the environment
variables declared in `~/.spacemacs.env' or `~/.spacemacs.d/.spacemacs.env'.
See the header of this file for more information."
(spacemacs/load-spacemacs-env))
(defun dotspacemacs/user-init ()
"Initialization for user code:
This function is called immediately after `dotspacemacs/init', before layer
configuration.
It is mostly for variables that should be set before packages are loaded.
If you are unsure, try setting them in `dotspacemacs/user-config' first."
)
(defun dotspacemacs/user-load ()
"Library to load while dumping.
This function is called only while dumping Spacemacs configuration. You can
`require' or `load' the libraries of your choice that will be included in the
dump."
)
(defun dotspacemacs/user-config ()
"Configuration for user code:
This function is called at the very end of Spacemacs startup, after layer
configuration.
Put your configuration code here, except for variables that should be set
before packages are loaded."
)
;; Do not write anything past this comment. This is where Emacs will
;; auto-generate custom variable definitions.
You can’t perform that action at this time.