Releases: ils15/BlueR
Marlin 2.0.9.2 Version
Updated to Latest Marlin Stable (Marlin 2.0.9.2)
Parametrize BlueR Version Names
List of Features
Features | Implemented |
---|---|
Display UI | New Marlin Color UI |
Advanced Pause | YES |
Mesh Bed Leveling | YES |
Corneling Leveling | YES |
Display Percentage | YES |
Junction Deviation | YES (0.02) |
Filament Sensor | YES |
Power Loss recovery | YES |
EEPROM | YES (STM32 Flash) |
RAM: [======== ] 79.3% (used 52000 bytes from 65536 bytes)
Flash: [===== ] 51.2% (used 268580 bytes from 524288 bytes)
Please Download RIGHT VERSION BELOW
BlueR V1 (TMC2208 and BMG Extruder)
BlueR V2 (TMC2225 and BMG Exruder)
For users who want to compile your own version, please refer to this two videos
For Old BlueR V1 (TMC2208 and metal extruder), you can use BlueR V1 and Set Esteps to 93
Config Files has fast configuration to TMC2209 too
For this, you need to uncomment line //#define BLUER_TMC2209 and compile it using auto build Marlin (video below)
Some BlueR V1 Users Related Wrong extruder direction. Please install E_INV version if you have problems with Extruder
Be careful. New BlueR Has nano V1.3 Board. Install version below can broke motherboard bootloader
You can Download kakarotojmsc pack with a lot of firmwares here: https://www.thingiverse.com/thing:4728032
EN:
https://www.youtube.com/watch?v=eq_ygvHF29I
v2.1
Updated to Latest Marlin Stable (Marlin 2.0.8)
New
Multilanguage Settings into display (en,pt_br,ru,es,it)
Optimization
PID Parameters
Minor Bugfixes
X and Y Offsets
Know Bugs
Tell me
Pay Attention
EEPROM could be reseted After update
Please write down your parameters, such steps, Z offsets, etc Before install
List of Features
Features | Implemented |
---|---|
Display UI | New Marlin Color UI |
Advanced Pause | YES |
Mesh Bed Leveling | YES |
Corneling Leveling | YES |
Display Percentage | YES |
Junction Deviation | YES (0.02) |
Filament Sensor | YES |
Power Loss recovery | YES |
EEPROM | YES (STM32 Flash) |
RAM: [======== ] 78.9% (used 51728 bytes from 65536 bytes)
Flash: [====== ] 58.5% (used 306780 bytes from 524288 bytes)
Please Download RIGHT VERSION BELOW
BlueR V2 (TMC2208 and BMG Extruder)
BlueR V3 (TMC2225 and BMG Exruder)
For users who want to compile your own version, please refer to this two videos
For BlueR V1 (TMC2208 and metal extruder), you can use BlueR V2 and Set Esteps to 93
Config Files has fast configuration to TMC2209 too
For this, you need to uncomment line //#define BLUER_TMC2209 and compile it using auto build Marlin (video below)
EN:
https://www.youtube.com/watch?v=eq_ygvHF29I
Two Trees BlueR Marlin Color UI
Updated to Latest Marlin Stable (Marlin 2.0.7.2)
Optimization
Now home moviment is diagonal (#define QUICK_HOME)
Minor LCD Info Improvements
Minor Bugfixes
X and Y Offsets
Know Bugs
Tell me
Pay Attention
EEPROM could be reseted After update
Please write your parameters, such steps, Z offsets, etc Before install
List of Features
Features | Implemented |
---|---|
Display UI | New Marlin Color UI |
Advanced Pause | YES |
Mesh Bed Leveling | YES |
Corneling Leveling | YES |
Display Percentage | YES |
Junction Deviation | YES (0.02) |
Filament Sensor | YES |
Neopixel | Ready |
Power Loss recovery | YES |
EEPROM | YES (STM32 Flash) |
RAM: [======== ] 78.9% (used 51728 bytes from 65536 bytes)
Flash: [====== ] 58.5% (used 306780 bytes from 524288 bytes)
Please Download RIGHT VERSION BELOW
Pay attention: Default E steps are 415mm/s. If you use old Version with normal extruder, please set up steps to 93mm/s
The EINV version is recommended for those with a BlueR V2 (More BLUE). If your engine is still inverted, download the Default version
Some printers of V3 Model - BlueR V2 on the Box(bit.ly/BlueRV3) has new steppers with TMC2225 steppers drivers (1/32 microsteppings default). You need to set X and Y steps/mm to 160mm/s
Test it
PT BR
Preste atenção: os passos E padrão são 415 mm / s. Se você usar a versão antiga com extrusora normal, configure os passos para 93 mm / s
A versão EINV é recomendada para quem tem a BlueR V2 (predominantemente Azul). Caso mesmo assim seu motor fique invertido, baixe a versão Default
Algumas impressoras do modelo V3 - BlueR V2 Assinalado na Caixa (bit.ly/BlueRV3) possuem novos drivers TMC2225 com 1/32 microstepping de fábrica. Você precisa definir os passos X e Y para 160 mm / s
Teste o movimento antes de realizar a primeira impressão
![Version] (https://i.ibb.co/98nPrb2/photo-2020-11-05-12-35-00.jpg)
Two Trees BlueR Marlin Color UI
Based on Latest Stable Release (Marlin 2.0.7)
Minor Bugfixes
** Fixed X,Y home Offsets (please send-me feedback)
Know Bugs
Tell me
List of Features
Features | Implemented |
---|---|
Display UI | New Marlin Color UI |
Advanced Pause | YES |
Mesh Bed Leveling | YES |
Corneling Leveling | YES |
Display Percentage | YES |
Junction Deviation | YES (0.02) |
Filament Sensor | YES |
Neopixel | Ready |
Power Loss recovery | YES |
EEPROM | YES (STM32 Flash) |
RAM: [======== ] 78.9% (used 51728 bytes from 65536 bytes)
Flash: [====== ] 58.5% (used 306780 bytes from 524288 bytes)
Please Download RIGHT VERSION BELOW
Pay attention: Default E steps are 415mm/s. If you use old Version with normal extruder, please set up steps to 93mm/s
The E_INV version is recommended for those with a BlueR V2 (More BLUE). If your engine is still inverted, download the Default version
Some printers of V3 Model - BlueR V2 on the Box(bit.ly/BlueRV3) has new steppers with TMC2225 steppers drivers (1/32 microsteppings default). You need to set X and Y steps/mm to 160mm/s
Test it
PT BR
Preste atenção: os passos E padrão são 415 mm / s. Se você usar a versão antiga com extrusora normal, configure os passos para 93 mm / s
A versão E_INV é recomendada para quem tem a BlueR V2 (predominantemente Azul). Caso mesmo assim seu motor fique invertido, baixe a versão Default
Algumas impressoras do modelo V3 - BlueR V2 Assinalado na Caixa (bit.ly/BlueRV3) possuem novos drivers TMC2225 com 1/32 microstepping de fábrica. Você precisa definir os passos X e Y para 160 mm / s
Teste o movimento antes de realizar a primeira impressão
Two Trees BlueR Marlin Color UI
Based on Latest Stable Release (Marlin 2.0.7)
New
Updated Latest Marlin Stable (2.0.7.1)
Touch UI support for X2, Y2 and Z2 (#19538)
Fixed
- Display can be show wrong icon for temperature
- No move on Park = No move on Resume (#19569)
Know Bugs
Tell me
List of Features
Features | Implemented |
---|---|
Display UI | New Marlin Color UI |
Advanced Pause | YES |
Mesh Bed Leveling | YES |
Corneling Leveling | YES |
Display Percentage | YES |
Junction Deviation | YES (0.02) |
Filament Sensor | YES |
Neopixel | Ready |
Power Loss recovery | YES |
EEPROM | YES (STM32 Flash) |
RAM: [======== ] 78.9% (used 51728 bytes from 65536 bytes)
Flash: [====== ] 58.5% (used 306780 bytes from 524288 bytes)
Please Download RIGHT VERSION BELOW
Pay attention: Default E steps are 415mm/s. If you use old Version with normal extruder, please set up steps to 93mm/s
The E_INV version is recommended for those with a BlueR V2 (More BLUE). If your engine is still inverted, download the Default version
Some printers of V3 Model (bit.ly/BlueRV3) has new steppers with TMC2225 steppers drivers (1/32 microsteppings default). You need to set X and Y steps/mm to 160mm/s
Test it
PT BR
Preste atenção: os passos E padrão são 415 mm / s. Se você usar a versão antiga com extrusora normal, configure os passos para 93 mm / s
A versão E_INV é recomendada para quem tem a BlueR V2 (predominantemente Azul). Caso mesmo assim seu motor fique invertido, baixe a versão Default
Algumas impressoras do modelo V3 (bit.ly/BlueRV3) possuem novos drivers TMC2225 com 1/32 microstepping de fábrica. Você precisa definir os passos X e Y para 160 mm / s
Teste o movimento antes de realizar a primeira impressão
Two Trees BlueR Marlin Color UI
Based on Latest Stable Release (Marlin 2.0.7)
New
Motion menu when you click in X, Y, Z
Fixed
- Mesh Bed Leveling
- Power Loss Recovery (need test)
- Fix Load/Unload Length
Know Bugs
- Display can be show wrong icon for temperature
List of Features
Features | Implemented |
---|---|
Display UI | New Marlin Color UI |
Advanced Pause | YES |
Mesh Bed Leveling | YES |
Corneling Leveling | YES |
Display Percentage | YES |
Junction Deviation | YES (0.02) |
Filament Sensor | YES |
Neopixel | Ready |
Power Loss recovery | YES |
EEPROM | YES (STM32 Flash) |
RAM: [======== ] 78.9% (used 51728 bytes from 65536 bytes)
Flash: [====== ] 58.5% (used 306780 bytes from 524288 bytes)
Please Download RIGHT VERSION BELOW
Pay attention: Default E steps are 415mm/s. If you use old Version with normal extruder, please set up steps to 93mm/s
The E_INV version is recommended for those with a BlueR V2 (More BLUE). If your engine is still inverted, download the Default version
Some printers of V3 Model (bit.ly/BlueRV3) has new steppers with TMC2225 steppers drivers (1/32 microsteppings default). You need to set X and Y steps/mm to 160mm/s
Test it
PT BR
Preste atenção: os passos E padrão são 415 mm / s. Se você usar a versão antiga com extrusora normal, configure os passos para 93 mm / s
A versão E_INV é recomendada para quem tem a BlueR V2 (predominantemente Azul). Caso mesmo assim seu motor fique invertido, baixe a versão Default
Algumas impressoras do modelo V3 (bit.ly/BlueRV3) possuem novos drivers TMC2225 com 1/32 microstepping de fábrica. Você precisa definir os passos X e Y para 160 mm / s
Teste o movimento antes de realizar a primeira impressão
Two Trees BlueR Marlin Color UI
Based on Latest Stable Release (Marlin 2.0.7)
New
Motion menu when you click in X, Y, Z
Fixed
- Mesh Bed Leveling
- Power Loss Recovery (need test)
Know Bugs
- Power Loss Recovery Stucks (Robin Nano BUG)
- Display can be show wrong icon for temperature
List of Features
Features | Implemented |
---|---|
Display UI | New Marlin Color UI |
Advanced Pause | YES |
Mesh Bed Leveling | YES (BUG IN COLOR UI) |
Corneling Leveling | YES |
Display Percentage | YES |
Junction Deviation | YES (0.02) |
Filament Sensor | YES |
Neopixel | Ready |
Power Loss recovery | YES |
EEPROM | YES (STM32 Flash) |
RAM: [======== ] 78.9% (used 51728 bytes from 65536 bytes)
Flash: [====== ] 58.5% (used 306780 bytes from 524288 bytes)
Please Download RIGHT VERSION BELOW
The E_INV version is recommended for those with a BMG extruder. If your engine is still inverted, download the Default version
PT BR
A versão E_INV é recomendada para quem tem extrusora BMG. Caso mesmo assim seu motor fique invertido, baixe a versão Default
Two Trees BlueR Marlin Color UI
Based on Latest Bugfix
New
Motion menu when you click in X, Y, Z
Fixed
- Mesh Bed Leveling
Know Bugs
- Power Loss Recovery Stucks (Robin Nano BUG)
- Display can be show wrong icon for temperature
List of Features
Features | Implemented |
---|---|
Display UI | New Marlin Color UI |
Advanced Pause | YES |
Mesh Bed Leveling | YES (BUG IN COLOR UI) |
Corneling Leveling | YES |
Display Percentage | YES |
Junction Deviation | YES (0.02) |
BLTOUCH | YES (BL version) |
Filament Sensor | YES |
Neopixel | Ready |
Power Loss recovery | YES - Frozen Screen - BUG CONFIRMED |
EEPROM | YES (STM32 Flash) |
RAM: [======== ] 78.9% (used 51728 bytes from 65536 bytes)
Flash: [====== ] 58.5% (used 306780 bytes from 524288 bytes)
Please Download RIGHT VERSION BELOW
Bluer_Default.Settings.zip - Made for BlueR Default (without BMG)
Bluer_Default.Settings_BMG.zip - Made for BlueR 2.0 (with BMG)
BlueR_TMC2209_BLTOUCH.zip - Made for BlueR with TMC2209 Drivers and BLTOUCH upgrade (with BMG)
Bluer_TMC2209_BMG.zip- Made for BlueR with TMC2209 Drivers upgrade (with BMG)
- *OBS Some person related BMG version is inverted. if you face this problem, install the Bluer_Default.Settings.zip and change the Esteps to 415
PT BR
Baixe a VERSÃO CORRETA ABAIXO
Bluer_Default.Settings.zip - Feito para BlueR padrão (sem BMG)
Bluer_Default.Settings_BMG.zip - Feito para BlueR V2 (com BMG)
BlueR_TMC2209_BLTOUCH.zip - Feito para BlueR com drivers TMC2209 e
atualização BLTOUCH (com BMG) Bluer_TMC2209_BMG.zip- Feito para BlueR
com atualização de drivers TMC2209 (com BMG)
- OBS Algumas pessoas relataram que versão do BMG pode estar com
motores invertidos . Se você enfrentar esse problema, instale o
Bluer_Default.Settings.zip e mude os Esteps para 415 mm / s
Two Trees BlueR Marlin Color UI
Optimized PID Values
Fixed Y Nozzle outside Bed area
Know Bugs
Mesh Bed Leveling require first click and doesnt start (COLOR UI BUG)
Power Loss Recovery Stucks (Robin Nano BUG)
List of Features
Features | Implemented |
---|---|
Display UI | New Marlin Color UI |
Advanced Pause | YES |
Mesh Bed Leveling | YES (BUG IN COLOR UI) |
Corneling Leveling | YES |
Display Percentage | YES |
Junction Deviation | YES (0.02) |
BLTOUCH | YES (BL version) |
Filament Sensor | YES |
Neopixel | Ready |
Power Loss recovery | YES - Frozen Screen - BUG CONFIRMED |
EEPROM | YES (STM32 Flash) |
RAM: [======== ] 78.9% (used 51728 bytes from 65536 bytes)
Flash: [====== ] 58.5% (used 306780 bytes from 524288 bytes)
Please Download RIGHT VERSION BELOW
Bluer_Default.Settings.zip - Made for BlueR Default (without BMG)
Bluer_Default.Settings_BMG.zip - Made for BlueR 2.0 (with BMG)
BlueR_TMC2209_BLTOUCH.zip - Made for BlueR with TMC2209 Drivers and BLTOUCH upgrade (with BMG)
Bluer_TMC2209_BMG.zip- Made for BlueR with TMC2209 Drivers upgrade (with BMG)
*OBS Some person related BMG version is inverted. if you face this problem, install the Bluer_Default.Settings.zip and change the steps to 415mm/s
PT BR
Baixe a VERSÃO CORRETA ABAIXO
Bluer_Default.Settings.zip - Feito para BlueR padrão (sem BMG)
Bluer_Default.Settings_BMG.zip - Feito para BlueR V2 (com BMG)
BlueR_TMC2209_BLTOUCH.zip - Feito para BlueR com drivers TMC2209 e atualização BLTOUCH (com BMG)
Bluer_TMC2209_BMG.zip- Feito para BlueR com atualização de drivers TMC2209 (com BMG)
- OBS Algumas pessoas relataram que versão do BMG pode estar com motores invertidos . Se você enfrentar esse problema, instale o Bluer_Default.Settings.zip e mude os steps para 415 mm / s
Two Trees BlueR Marlin Color UI
Fixed minor Issues
Fixed E motor Orientation
Know Bugs
Mesh Bed Leveling require first click and doesnt start (COLOR UI BUG)
Power Loss Recovery Stucks (Robin Nano BUG)
List of Features
Features | Implemented |
---|---|
Display UI | New Marlin Color UI |
Advanced Pause | YES |
Mesh Bed Leveling | YES (BUG IN COLOR UI) |
Corneling Leveling | YES |
Display Percentage | YES |
Junction Deviation | YES (0.02) |
BLTOUCH | YES (BL version) |
Filament Sensor | YES |
Neopixel | Ready |
Power Loss recovery | YES - Frozen Screen - BUG CONFIRMED |
EEPROM | YES (STM32 Flash) |
RAM: [======== ] 78.9% (used 51728 bytes from 65536 bytes)
Flash: [====== ] 58.0% (used 304044 bytes from 524288 bytes)
Please Download RIGHT VERSION ABOUT
Bluer_Default.Settings.zip - Made for BlueR Default (without BMG)
Bluer_Default.Settings_BMG.zip - Made for BlueR 2.0 (with BMG)
BlueR_TMC2209_BLTOUCH.zip - Made for BlueR with TMC2209 Drivers and BLTOUCH upgrade (with BMG)
Bluer_TMC2209_BMG.zip- Made for BlueR with TMC2209 Drivers upgrade (with BMG)
*OBS Some person related BMG version is inverted. if you face this problem, install the Bluer_Default.Settings.zip and change the steps to 415mm/s