Release 26.0407 (XCF 1.4 inch)

Fixes and a new feature

• Implemented aircraft type display (#19)
• Fix the exit from serial datamonitor by long press
• Longer timeout for info fields to avoid flickering and fix clearing fields

Aircraft type preview:

Release 26.0407 (XCF 2.4 inch)

New features and fixes

• Topdown mode for display implemented
• Implemented aircraft type display (#19)
• longer timeout for info fields to avoid flickering and fix clearing fields
• get selftest running with high impedance TX pin configured
• minor robustness fixes for distant airliners from power Flarm ADS-B data

Release 26.0329-11 (XCF 2.4 inch)

Robustness and a new feature

• Limit vertical distance and aircraft ID to printable sizes
• Add a feature for orientation TopDown -> ID button on the left side
• Fix info timeout to clear Flarm Version and more at Flarm startup
• Fix selftest supporting high impedance TX pin

Release 25.1020-18 (XCF 2.4 inch)

Minor fixes:

• Solve checksum issue under load by extra mutex for targets
• Code robustness, improved error handling
• Increase circle thickness for marking team member by hold ID button (> 3 s)

Full Changelog: 25.1006...25.1020-18

Release 25.1020 (XCF 1.47 inch)

New feature to mark the currently selected target, and minor fixes

• Solve checksum issue under load by extra mutex for targets
• Fix realtime issues, checksum errors under high load
• Code robustness, improved error handling
• Mergeback team feature from 2.4 inch to mark team member by hold ID button (> 3 s)
• New flarmnet database

Full Changelog: 24.1226-1.4...25.1020-17

Release 25.1006 (XCF 2.4 inch)

New feature to mark one target as team (red circle) and minor improvements:

• Implement team marker by a ID button 'hold' (> 2s) method (new feature)
• Key repeat implemented for Up/Down buttons
• Extend startup screen to 4 seconds, longer buzz tone, improved startup info
• Fix potetial RX artefacts (fix)
• Tune push button timers
• Redraw info every 3 seconds to avoid potential corruption from heavy traffic
• New flarmnet database

Full Changelog: 24.1226...25.1006

Release 24.1226 (XCF 2.4 inch)

One new feature:

• Support to setup inverted polartity on RS232 signal for flarms with non TTL specification on RS232 interface e.g. ECW100
• New Flarm database based on Flarmnet state of December 26 2024
• Fixed possible artefacts on display that may appear under some conditions

Release 24.1226 (XCF 1.47 inch)

New feature:

• Support to setup inverted polartity on RS232 signal for flarms with non TTL specification on RS232 interface e.g. ECW100
• New Flarm database based on Flarmnet state of December 26 2024
• Fixed possible artefacts on display that may appear under some conditions

Release 24.1201 (XCF 1.47 inch)

Several new features and fixes and TEK compensation

• Show Autobaud baud-rate in start screen when automatic search is ongoing (new feature)
• A solution for climb indication for competition flying ( #5 (comment) ) (new feature)
• Display Flarm RX together with number of targets received e.g. (RX 2) (new feature)
• Buzzer queue flush when new alarm level comes in (improvement)
• Datamonitor to monitor serial data stream that comes in (new feature)
• Info screen to display Flarms SW&HW version (new feature)
• Display progress on IGC File upload (e.g. to SD disk), or FW update in percent (new feature)
• Display Flarm alarm's, color by severity, in cleartext e.g. "Obstacle database invalid" (new feature)
• Increase capability to read from serial line (larger buffer and less sleep time) (improvement)
• Task prio's adapted, fix potential artifacts that may have occurred in rare situations (fix epic bug)

Note, replaces former release from 1128 and includes improved TEK compensation for indicated best climb rate

Release 24.1201 (XCF 2.4 inch) Latest

Several new features and fixes
NOTE: For the larger 2.4 inch XCFlarmView only

• Show Autobaud baud-rate in start screen when automatic search is ongoing (new feature)
• A solution for climb indication for competition flying ( #5 (comment) ) (new feature)
• Display Flarm RX together with number of targets received e.g. (RX 2) (new feature)
• Buzzer queue flush when new alarm level comes in (improvement)
• Datamonitor to monitor serial data stream that comes in (new feature)
• Info screen to display Flarms SW&HW version (new feature)
• Display progress on IGC File upload (e.g. to SD disk), or FW update in percent (new feature)
• Display Flarm alarm's, color by severity, in cleartext e.g. "Obstacle database invalid" (new feature)
• Increase capability to read from serial line (larger buffer and less sleep time) (improvement)
• Task prio's adapted, fix potential artifacts that may have occurred in rare situations (fix epic bug)

Note, replaces former release from 1128 and includes improved TEK compensation for indicated best climb rate