Update Type_01_model_programe_For_Single_Sensor.ino

Type_01_model_programe_For_Single_Sensor/Type_01_model_programe_For_Single_Sensor.ino

@@ -1,55 +1,55 @@
-#include <ICSC.h>
-#include <OneWire.h>
-#include <DallasTemperature.h>
-#include <SoftwareSerial.h>
-
-#define ONE_WIRE_BUS 4
-
-OneWire oneWire(ONE_WIRE_BUS);
-
-float temp;
-char itemp;
-
-DallasTemperature sensors(&oneWire);
-
-//SoftwareSerial mySerial(10, 11); // RX, TX
-SoftwareSerial mySerial(5, 6);
-
-
-void setup()
-{
-  ICSC.begin(3, 115200,2);
-
-
-   mySerial.begin(9600);
-   mySerial.println("Device Started..");
-
-   sensors.begin();
-
-
-}
-
-void loop()
-{
-      sensors.requestTemperatures();
-      temp = sensors.getTempCByIndex(0);
-
-      if(temp == -127){
-
-         ICSC.send(1, 'P', 10, "z");
-      mySerial.println("Senror fault");
-
-        }
-
-      else{
-      itemp = (char) temp;
-
-      ICSC.send(1, 'P', 10, (char *)&itemp);
-      mySerial.print("Temperature Sent to Serial Bus");
-      mySerial.println("Temperature : ");
-      mySerial.print(temp);
-      mySerial.println(" C");
-}
-      delay(500);
-
+#include <ICSC.h>
+#include <OneWire.h>
+#include <DallasTemperature.h>
+#include <SoftwareSerial.h>
+
+#define ONE_WIRE_BUS 4
+
+OneWire oneWire(ONE_WIRE_BUS);
+
+float temp;
+char itemp;
+
+DallasTemperature sensors(&oneWire);
+
+//SoftwareSerial mySerial(10, 11); // RX, TX
+SoftwareSerial mySerial(5, 6);
+
+
+void setup()
+{
+  ICSC.begin(3, 115200,2);
+ 
+   
+   mySerial.begin(9600);
+   mySerial.println("Device Started..");
+   
+   sensors.begin();
+   
+  
+}
+
+void loop()
+{
+      sensors.requestTemperatures();
+      temp = sensors.getTempCByIndex(0);
+
+      if(temp == -127){
+
+         ICSC.send(1, 'P', 10, "z");
+      mySerial.println("Sensor fault");
+        
+        }
+      
+      else{
+      itemp = (char) temp;
+      
+      ICSC.send(1, 'P', 10, (char *)&itemp);
+      mySerial.print("Temperature Sent to Serial Bus");
+      mySerial.println("Temperature : ");
+      mySerial.print(temp);
+      mySerial.println(" C");
+}
+      delay(500);
+    
 }