Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with HTTPS or Subversion.

Download ZIP
  • jb4.2.1_1.0.0-alpha

    ENGR00242042 MX6DQ/DL: fix boot fail issue on mx6dl boards
    MX6DQ and MX6DL share the common board file, but only MX6DQ has built-in
    SATA,  for the SATA PDDQ should be enabled default, so it needs to add
    code to distinguish different chip ID.
    
    Signed-off-by: Lin Fuzhen <fuzhen.lin@freescale.com>
  • rel_imx_3.0.35_1.1.0

    ENGR00235821 mx6: correct work flow of PFDs
    PFDs need to be gate/ungate after PLL lock to reset
    PFDs to right state. Otherwise PFDs may lose correct
    state in state-machine, then no output clock.
    For i.MX6DL and i.MX6SL, ROM have taken care of PFD396
    already since the bus clock needs it.
    
    Signed-off-by: Anson Huang <b20788@freescale.com>
  • rel_imx_3.0.35_3.0.0

    ENGR000234991 MX6DL/ARD: Two boards met kernel dump during boot up
    The issue is caused by DDR script changed io pads to DDR differential mode
    but forget to do the calibration data update.
    
    This patch updated the DDR script on MX6DL ARD board based on
    the commit on the ddr-scripts-rel:
    53121e0 Updated MX6DL and MX6DQ ARD and SabreSD scripts with new
    calibration values for IO pads set to differential mode;
    
    Signed-off-by: Jason Liu <r64343@freescale.com>
  • jb4.1.2_1.0.0-beta

    ENGR000234991 MX6DL/ARD: Two boards met kernel dump during boot up
    The issue is caused by DDR script changed io pads to DDR differential mode
    but forget to do the calibration data update.
    
    This patch updated the DDR script on MX6DL ARD board based on
    the commit on the ddr-scripts-rel:
    53121e0 Updated MX6DL and MX6DQ ARD and SabreSD scripts with new
    calibration values for IO pads set to differential mode;
    
    Signed-off-by: Jason Liu <r64343@freescale.com>
  • imx-android-13.4.1

    ENGR00233928 i.mx6q/sabresd: update the DDR script for i.MX6Q sabresd…
    … board
    
    This commit update the DDR script for i.MX6Q sabresd board
    based on the top of the following commit on ddr-scripts-rel:
    02b8a73 removed some verbage (comments) from init, no changes to actual init
    
    Signed-off-by: Jason Liu <r64343@freescale.com>
  • imx-android-r13.4-ga.02

    ENGR00233928 i.mx6q/sabresd: update the DDR script for i.MX6Q sabresd…
    … board
    
    This commit update the DDR script for i.MX6Q sabresd board
    based on the top of the following commit on ddr-scripts-rel:
    02b8a73 removed some verbage (comments) from init, no changes to actual init
    
    Signed-off-by: Jason Liu <r64343@freescale.com>
  • rel_imx_3.0.35_12.10.02

    ENGR00230364 - imx6sl: FEC: fix cycle reboot fail in EVK platform for…
    … bootp.
    
    In some imx6sl evk boards, fec cannot work fine while doing
    cycle reboot via to execute command "reboot" in kernel.
    
    The root cause: phys clock source is closed when reboot system,
    and LAN8720 status machine is in disorder. So it needs to do phy
    hardware reset to make phy enter normal state machine.
    
    Signed-off-by: Fugang Duan  <B38611@freescale.com>
  • imx-android-13.5.0-ga

    ENGR00231581 BCH: fix the wrong data size macros in BCH
    In the mx23/mx28, the DATA0_SIZE/DATAN_SIZE of the BCH's
    HW_BCH_FLASH1LAYOUT0/HW_BCH_FLASH0LAYOUT1 should be the real
    bytes length of the data chunk 0 and data chunk 1.
    
    But in the mx6q/mx50, the DATA0_SIZE/DATAN_SIZE of the BCH's
    HW_BCH_FLASH1LAYOUT0/HW_BCH_FLASH0LAYOUT1 should be multiple of 4 bytes.
    
    this patch fixes the wrong macros.
    
    Signed-off-by: Huang Shijie <b32955@freescale.com>
  • rel_imx_3.0.35_12.09.01

    ENGR00223027 Add support for nand on MFG for IMX6Q
    Add support for nand flash on IMX6Q. Modifying partitions number and size.
    mx6q_sabreauto_nand_boot.h --> Modify the size of partitions used to 3.
          PARTITION 0 (16M)
    ------------------------------
    |                             |
    |             uboot           |
    |                             |
    ------------------------------
    
          PARTITION 1 (16M)
    ------------------------------
    |                             |
    |            Kernel           |
    |                             |
    ------------------------------
    
          PARTITION 2 (128M)
    ------------------------------
    |                             |
    |                             |
    |       Root file system      |
    |                             |
    |                             |
    ------------------------------
    
    mx6q_sabreauto_mfg_enable_nand.h --> Enable partitions on manufacturing tool
    
    Signed-off-by: Alejandro Sierra <b18039@freescale.com>
  • imx-android-r13.5-beta

    ENGR00224313:i.MX6 general:enable CONFIG_CMD_IMXOTP to fix the build …
    …error
    
    Commit 7942886(ENGR00221503-2 imx6: add cpu serial number support)
    introduces dependency on "CONFIG_SERIAL_TAG" and "CONFIG_CMD_IMXOTP".
    On U-boot configuration header files which only defines the first one, build
    error will be met.
    
    --- build error message ---
    arm_cortexa8/mx6/libmx6.a(generic.o): In function `get_board_serial':
    arm_cortexa8/mx6/generic.c:1438: undefined reference to `imx_otp_read_one_u32'
    arm_cortexa8/mx6/generic.c:1439: undefined reference to `imx_otp_read_one_u32'
    ---------------------------
    
    To fix it, add missing "CONFIG_CMD_IMXOTP" macro definition in the
    config head file.
    
    Configs affected are:
    ---------------------------
    	mx6q_arm2_iram
    	mx6q_sabresd_iram
    	mx6dl_arm2_iram
    	mx6sl_arm2_iram
    	mx6sl_evk_iram
    
    Signed-off-by: Eric Sun <jian.sun@freescale.com>
Something went wrong with that request. Please try again.