Skip to content
pimatic rfbox using generic protocol
Branch: development
Clone or download
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Type Name Latest commit message Commit time
Failed to load latest commit information.
Sketches
libraries
.gitignore
LICENSE
README.md
rf-box.jpg
rfbox-multiprobe-with-LCD.ino
rfbox-multiprobe.ino
rfbox-multiprobe.ino.old
rfbox-relay-with-status-retrieve.ino

README.md

generic-rfbox

This sensor probe will collect sensor data and send it by 433MHz RF In the Sensors folder you will find a collection of Arduino sketches to make different probes for pimatic (https://github.com/pimatic/pimatic-homeduino) using the generic protocol. The main Sketch rfbox-multiprobe.ino contains multiple sensors that you can enable or disable at will.

// Config which modules to use
boolean DHT11 = false;
boolean DS18B20 = true;
boolean ultrasonic = false;

The sensor will blink the internal LED and transmit the data, every sensor will send it's own data.

Update: added ds18b20 resolution check and if it's not 12 bits it will set it to 12.

The resolution of the temperature sensor is user-configurable to 9, 10, 11, or 12 bits, corresponding to increments of 0.5°C, 0.25°C, 0.125°C, and 0.0625°C, respectively. The default resolution at power-up is 12-bit.

Example box: Hardware

A new concept is found here http://www.thingiverse.com/thing:643661

You can’t perform that action at this time.