Skip to content
Browse files

Minor update to example configs

  • Loading branch information...
1 parent ee4289a commit 8de053ee389e9c66d4a9270083e8d965c309e107 @attilamolnar attilamolnar committed Mar 31, 2013
Showing with 11 additions and 13 deletions.
  1. +10 −11 docs/conf/modules.conf.example
  2. +1 −2 docs/conf/opers.conf.example
View
21 docs/conf/modules.conf.example
@@ -483,17 +483,16 @@
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Cloaking module: Adds usermode +x and cloaking support.
-# Relies on the module m_md5.so being loaded before m_cloaking.so in
-# the configuration file.
+# Relies on the module m_md5.so being loaded.
# To use, you should enable m_conn_umodes and add +x as
# an enabled mode. See the m_conn_umodes module for more information.
#<module name="m_cloaking.so">
#
#-#-#-#-#-#-#-#-#-#-#- CLOAKING CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
-# If you specify the m_cloaking.so module as above, you must define #
-# cloak keys, and optionally a cloak prefix as shown below. The cloak #
-# keys must be shared across the network for correct cloaking. #
+# To use m_cloaking, you must define a cloak key, and optionally a #
+# cloak prefix as shown below. The cloak key must be shared across #
+# the network for correct cloaking. #
# #
# There are four methods of cloaking: #
# #
@@ -513,10 +512,10 @@
# compat-host InspIRCd 1.2-compatible host-based cloaking #
# compat-ip InspIRCd 1.2-compatible ip-always cloaking #
# #
-# You must specify key1, key2, key3, key4 for the compat cloaking #
-# modes; the values must be less than 0x80000000 and should be picked #
-# at random. Prefix is mandatory, will default to network name if not #
-# specified, and will always have a "-" appended. #
+# If you use a compat cloaking mode then you must specify key1, key2, #
+# key3, key4; the values must be less than 0x80000000 and should be #
+# picked at random. Prefix is mandatory, will default to network name #
+# if not specified, and will always have a "-" appended. #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
#
#<cloak mode="half"
@@ -602,7 +601,7 @@
# Connection throttle module. Configuration:
#<module name="m_connflood.so">
#
-#-#-#-#-#-#-#-#-#-#-#- CONTHROTTLE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+#-#-#-#-#-#-#-#-#-#-#- CONNTHROTTLE CONFIGURATION -#-#-#-#-#-#-#-#-#-#
# seconds, maxconns - Amount of connections per <seconds>.
#
# timeout - Time to wait after the throttle was activated
@@ -619,7 +618,7 @@
# quitmsg="Throttled" bootwait="10">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Custom prefixes : allows for channel prefixes to be added.
+# Custom prefixes: allows for channel prefixes to be added.
# This can replace m_chanprotect and m_halfop, except for services that
# recognise those modules by name
#<module name="m_customprefix.so">
View
3 docs/conf/opers.conf.example
@@ -25,13 +25,12 @@
# ACTIONS:
# - users/mass-message: allows opers with this priv to PRIVMSG and NOTICE to a server mask (e.g. NOTICE $*)
# - channels/high-join-limit: allows opers with this priv to join <channels:opers> total channels instead of <channels:users> total channels.
- # - channels/set-permanent: allows opers with this priv to set +P on channels with m_permchannels.
# PERMISSIONS:
# - users/flood/no-throttle: allows opers with this priv to send commands without being throttled (*NOTE)
# - users/flood/increased-buffers: allows opers with this priv to send and recieve data without worrying about being disconnected for exceeding limits (*NOTE)
#
# *NOTE: These privs are potantially dangerous, as they grant users with them the ability to hammer your server's CPU/RAM as much as they want, essentially.
- privs="users/auspex channels/auspex servers/auspex users/mass-message channels/high-join-limit channels/set-permanent users/flood/no-throttle users/flood/increased-buffers"
+ privs="users/auspex channels/auspex servers/auspex users/mass-message channels/high-join-limit users/flood/no-throttle users/flood/increased-buffers"
# usermodes: Oper-only usermodes that opers with this class can use.
usermodes="*"

0 comments on commit 8de053e

Please sign in to comment.
Something went wrong with that request. Please try again.