Merge tag 'v4.9.214' into lts2016/yocto

This is the 4.9.214 stable release

* tag 'v4.9.214': (585 commits)
  Linux 4.9.214
  libertas: make lbs_ibss_join_existing() return error code on rates overflow
  libertas: don't exit from lbs_ibss_join_existing() with RCU read lock held
  mwifiex: Fix possible buffer overflows in mwifiex_cmd_append_vsie_tlv()
  mwifiex: Fix possible buffer overflows in mwifiex_ret_wmm_get_status()
  dm: fix potential for q->make_request_fn NULL pointer
  scsi: megaraid_sas: Do not initiate OCR if controller is not in ready state
  pinctrl: sh-pfc: r8a7778: Fix duplicate SDSELF_B and SD1_CLK_B
  powerpc/pseries: Allow not having ibm, hypertas-functions::hcall-multi-tce for DDW
  tools/power/acpi: fix compilation error
  ARM: dts: at91: sama5d3: define clock rate range for tcb1
  ARM: dts: at91: sama5d3: fix maximum peripheral clock rates
  ARC: [plat-axs10x]: Add missing multicast filter number to GMAC node
  rtc: cmos: Stop using shared IRQ
  rtc: hym8563: Return -EINVAL if the time is known to be invalid
  NFSv4: try lease recovery on NFS4ERR_EXPIRED
  nfs: NFS_SWAP should depend on SWAP
  PCI: Don't disable bridge BARs when assigning bus resources
  scsi: ufs: Fix ufshcd_probe_hba() reture value in case ufshcd_scsi_add_wlus() fails
  RDMA/netlink: Do not always generate an ACK for some netlink operations
  ...

Documentation/ABI/testing/sysfs-bus-mei

@@ -4,7 +4,7 @@ KernelVersion:	3.10
 Contact:	Samuel Ortiz <sameo@linux.intel.com>
 		linux-mei@linux.intel.com
 Description:	Stores the same MODALIAS value emitted by uevent
-		Format: mei:<mei device name>:<device uuid>:
+		Format: mei:<mei device name>:<device uuid>:<protocol version>
 
 What:		/sys/bus/mei/devices/.../name
 Date:		May 2015

Documentation/kernel-parameters.txt

@@ -1965,6 +1965,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			kmemcheck=2 (one-shot mode)
 			Default: 2 (one-shot mode)
 
+	kpti=		[ARM64] Control page table isolation of user
+			and kernel address spaces.
+			Default: enabled on cores which need mitigation.
+			0: force disabled
+			1: force enabled
+
 	kstack=N	[X86] Print N words from the kernel stack
 			in oops dumps.
 

Makefile

@@ -1,6 +1,6 @@
 VERSION = 4
 PATCHLEVEL = 9
-SUBLEVEL = 209
+SUBLEVEL = 214
 EXTRAVERSION =
 NAME = Roaring Lionus
 

arch/arc/boot/dts/axs10x_mb.dtsi

@@ -63,6 +63,7 @@
 			interrupt-names = "macirq";
 			phy-mode = "rgmii";
 			snps,pbl = < 32 >;
+			snps,multicast-filter-bins = <256>;
 			clocks = <&apbclk>;
 			clock-names = "stmmaceth";
 			max-speed = <100>;

arch/arc/plat-eznps/Kconfig

@@ -7,7 +7,7 @@ menuconfig ARC_PLAT_EZNPS
 	bool "\"EZchip\" ARC dev platform"
 	select ARC_HAS_COH_CACHES if SMP
 	select CPU_BIG_ENDIAN
-	select CLKSRC_NPS
+	select CLKSRC_NPS if !PHYS_ADDR_T_64BIT
 	select EZNPS_GIC
 	select EZCHIP_NPS_MANAGEMENT_ENET if ETHERNET
 	help

arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi

@@ -27,6 +27,27 @@
 		reg = <0x0 0x80000000 0x0 0x80000000>;
 	};
 
+	main_12v0: fixedregulator-main_12v0 {
+		/* main supply */
+		compatible = "regulator-fixed";
+		regulator-name = "main_12v0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	evm_5v0: fixedregulator-evm_5v0 {
+		/* Output of TPS54531D */
+		compatible = "regulator-fixed";
+		regulator-name = "evm_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&main_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
 	vdd_3v3: fixedregulator-vdd_3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_3v3";

arch/arm/boot/dts/lpc3250-phy3250.dts

@@ -49,8 +49,8 @@
 		sd_reg: regulator@2 {
 			compatible = "regulator-fixed";
 			regulator-name = "sd_reg";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
 			gpio = <&gpio 5 5 0>;
 			enable-active-high;
 		};

arch/arm/boot/dts/lpc32xx.dtsi

@@ -139,11 +139,11 @@
 		};
 
 		clcd: clcd@31040000 {
-			compatible = "arm,pl110", "arm,primecell";
+			compatible = "arm,pl111", "arm,primecell";
 			reg = <0x31040000 0x1000>;
 			interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk LPC32XX_CLK_LCD>;
-			clock-names = "apb_pclk";
+			clocks = <&clk LPC32XX_CLK_LCD>, <&clk LPC32XX_CLK_LCD>;
+			clock-names = "clcdclk", "apb_pclk";
 			status = "disabled";
 		};
 
@@ -462,7 +462,9 @@
 			key: key@40050000 {
 				compatible = "nxp,lpc3220-key";
 				reg = <0x40050000 0x1000>;
-				interrupts = <54 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk LPC32XX_CLK_KEY>;
+				interrupt-parent = <&sic1>;
+				interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 

arch/arm/boot/dts/ls1021a-twr.dts

@@ -143,7 +143,7 @@
 };
 
 &enet0 {
-	tbi-handle = <&tbi1>;
+	tbi-handle = <&tbi0>;
 	phy-handle = <&sgmii_phy2>;
 	phy-connection-type = "sgmii";
 	status = "okay";
@@ -222,6 +222,13 @@
 	sgmii_phy2: ethernet-phy@2 {
 		reg = <0x2>;
 	};
+	tbi0: tbi-phy@1f {
+		reg = <0x1f>;
+		device_type = "tbi-phy";
+	};
+};
+
+&mdio1 {
 	tbi1: tbi-phy@1f {
 		reg = <0x1f>;
 		device_type = "tbi-phy";

arch/arm/boot/dts/ls1021a.dtsi

@@ -505,13 +505,22 @@
 		};
 
 		mdio0: mdio@2d24000 {
-			compatible = "gianfar";
+			compatible = "fsl,etsec2-mdio";
 			device_type = "mdio";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2d24000 0x0 0x4000>;
 		};
 
+		mdio1: mdio@2d64000 {
+			compatible = "fsl,etsec2-mdio";
+			device_type = "mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2d64000 0x0 0x4000>,
+			      <0x0 0x2d50030 0x0 0x4>;
+		};
+
 		ptp_clock@2d10e00 {
 			compatible = "fsl,etsec-ptp";
 			reg = <0x0 0x2d10e00 0x0 0xb0>;

arch/arm/boot/dts/sama5d3.dtsi

@@ -1109,49 +1109,49 @@
 					usart0_clk: usart0_clk {
 						#clock-cells = <0>;
 						reg = <12>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					usart1_clk: usart1_clk {
 						#clock-cells = <0>;
 						reg = <13>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					usart2_clk: usart2_clk {
 						#clock-cells = <0>;
 						reg = <14>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					usart3_clk: usart3_clk {
 						#clock-cells = <0>;
 						reg = <15>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					uart0_clk: uart0_clk {
 						#clock-cells = <0>;
 						reg = <16>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					twi0_clk: twi0_clk {
 						reg = <18>;
 						#clock-cells = <0>;
-						atmel,clk-output-range = <0 16625000>;
+						atmel,clk-output-range = <0 41500000>;
 					};
 
 					twi1_clk: twi1_clk {
 						#clock-cells = <0>;
 						reg = <19>;
-						atmel,clk-output-range = <0 16625000>;
+						atmel,clk-output-range = <0 41500000>;
 					};
 
 					twi2_clk: twi2_clk {
 						#clock-cells = <0>;
 						reg = <20>;
-						atmel,clk-output-range = <0 16625000>;
+						atmel,clk-output-range = <0 41500000>;
 					};
 
 					mci0_clk: mci0_clk {
@@ -1167,19 +1167,19 @@
 					spi0_clk: spi0_clk {
 						#clock-cells = <0>;
 						reg = <24>;
-						atmel,clk-output-range = <0 133000000>;
+						atmel,clk-output-range = <0 166000000>;
 					};
 
 					spi1_clk: spi1_clk {
 						#clock-cells = <0>;
 						reg = <25>;
-						atmel,clk-output-range = <0 133000000>;
+						atmel,clk-output-range = <0 166000000>;
 					};
 
 					tcb0_clk: tcb0_clk {
 						#clock-cells = <0>;
 						reg = <26>;
-						atmel,clk-output-range = <0 133000000>;
+						atmel,clk-output-range = <0 166000000>;
 					};
 
 					pwm_clk: pwm_clk {
@@ -1190,7 +1190,7 @@
 					adc_clk: adc_clk {
 						#clock-cells = <0>;
 						reg = <29>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					dma0_clk: dma0_clk {
@@ -1221,13 +1221,13 @@
 					ssc0_clk: ssc0_clk {
 						#clock-cells = <0>;
 						reg = <38>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					ssc1_clk: ssc1_clk {
 						#clock-cells = <0>;
 						reg = <39>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					sha_clk: sha_clk {

arch/arm/boot/dts/sama5d3_can.dtsi

@@ -37,13 +37,13 @@
 					can0_clk: can0_clk {
 						#clock-cells = <0>;
 						reg = <40>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					can1_clk: can1_clk {
 						#clock-cells = <0>;
 						reg = <41>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 				};
 			};

arch/arm/boot/dts/sama5d3_tcb1.dtsi

@@ -23,6 +23,7 @@
 					tcb1_clk: tcb1_clk {
 						#clock-cells = <0>;
 						reg = <27>;
+						atmel,clk-output-range = <0 166000000>;
 					};
 				};
 			};

arch/arm/boot/dts/sama5d3_uart.dtsi

@@ -42,13 +42,13 @@
 					uart0_clk: uart0_clk {
 						#clock-cells = <0>;
 						reg = <16>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					uart1_clk: uart1_clk {
 						#clock-cells = <0>;
 						reg = <17>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 				};
 			};

arch/arm/common/mcpm_entry.c

@@ -379,7 +379,7 @@ static int __init nocache_trampoline(unsigned long _arg)
 	unsigned int cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
 	phys_reset_t phys_reset;
 
-	mcpm_set_entry_vector(cpu, cluster, cpu_resume);
+	mcpm_set_entry_vector(cpu, cluster, cpu_resume_no_hyp);
 	setup_mm_for_reboot();
 
 	__mcpm_cpu_going_down(cpu, cluster);

arch/arm/include/asm/suspend.h

@@ -7,6 +7,7 @@ struct sleep_save_sp {
 };
 
 extern void cpu_resume(void);
+extern void cpu_resume_no_hyp(void);
 extern void cpu_resume_arm(void);
 extern int cpu_suspend(unsigned long, int (*)(unsigned long));
 

arch/arm/kernel/hyp-stub.S

@@ -179,8 +179,8 @@ ARM_BE8(orr	r7, r7, #(1 << 25))     @ HSCTLR.EE
 	@ Check whether GICv3 system registers are available
 	mrc	p15, 0, r7, c0, c1, 1	@ ID_PFR1
 	ubfx	r7, r7, #28, #4
-	cmp	r7, #1
-	bne	2f
+	teq	r7, #0
+	beq	2f
 
 	@ Enable system register accesses
 	mrc	p15, 4, r7, c12, c9, 5	@ ICC_HSRE

arch/arm/kernel/sleep.S

@@ -119,6 +119,14 @@ ENDPROC(cpu_resume_after_mmu)
 	.text
 	.align
 
+#ifdef CONFIG_MCPM
+	.arm
+THUMB(	.thumb			)
+ENTRY(cpu_resume_no_hyp)
+ARM_BE8(setend be)			@ ensure we are in BE mode
+	b	no_hyp
+#endif
+
 #ifdef CONFIG_MMU
 	.arm
 ENTRY(cpu_resume_arm)
@@ -134,6 +142,7 @@ ARM_BE8(setend be)			@ ensure we are in BE mode
 	bl	__hyp_stub_install_secondary
 #endif
 	safe_svcmode_maskall r1
+no_hyp:
 	mov	r1, #0
 	ALT_SMP(mrc p15, 0, r0, c0, c0, 5)
 	ALT_UP_B(1f)
@@ -162,6 +171,9 @@ ENDPROC(cpu_resume)
 
 #ifdef CONFIG_MMU
 ENDPROC(cpu_resume_arm)
+#endif
+#ifdef CONFIG_MCPM
+ENDPROC(cpu_resume_no_hyp)
 #endif
 
 	.align 2

arch/arm/mach-omap2/omap_hwmod.c

@@ -2588,7 +2588,7 @@ static void _setup_iclk_autoidle(struct omap_hwmod *oh)
  */
 static int _setup_reset(struct omap_hwmod *oh)
 {
-	int r;
+	int r = 0;
 
 	if (oh->_state != _HWMOD_STATE_INITIALIZED)
 		return -EINVAL;

arch/arm/mach-rpc/irq.c

@@ -117,7 +117,7 @@ extern unsigned char rpc_default_fiq_start, rpc_default_fiq_end;
 
 void __init rpc_init_irq(void)
 {
-	unsigned int irq, clr, set = 0;
+	unsigned int irq, clr, set;
 
 	iomd_writeb(0, IOMD_IRQMASKA);
 	iomd_writeb(0, IOMD_IRQMASKB);
@@ -129,6 +129,7 @@ void __init rpc_init_irq(void)
 
 	for (irq = 0; irq < NR_IRQS; irq++) {
 		clr = IRQ_NOREQUEST;
+		set = 0;
 
 		if (irq <= 6 || (irq >= 9 && irq <= 15))
 			clr |= IRQ_NOPROBE;