Permalink
Find file Copy path
Fetching contributors…
Cannot retrieve contributors at this time
2477 lines (2476 sloc) 59.7 KB
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<topology xmlns="http://www.cisco.com/VIRL" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" schemaVersion="0.9" xsi:schemaLocation="http://www.cisco.com/VIRL https://raw.github.com/CiscoVIRL/schema/v0.9/virl.xsd">
<node name="R1" type="SIMPLE" subtype="IOSv" location="154,69">
<extensions>
<entry key="config" type="String">!
! Last configuration change at 08:16:34 UTC Fri Sep 4 2015
!
version 15.5
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R1
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-intf
!
address-family ipv4
exit-address-family
!
address-family ipv6
exit-address-family
!
enable password cisco
!
no aaa new-model
ethernet lmi ce
!
!
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
no ip domain lookup
ip cef
no ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
!
redundancy
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface GigabitEthernet0/0
vrf forwarding Mgmt-intf
ip address 10.255.2.113 255.255.0.0
duplex auto
speed auto
media-type rj45
!
interface GigabitEthernet0/1
ip address 10.1.6.1 255.255.255.0
duplex auto
speed auto
media-type rj45
!
!
router eigrp 1
network 10.1.6.0 0.0.0.255
eigrp router-id 1.1.1.1
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
!
!
!
!
control-plane
!
banner exec `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
banner incoming `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
banner login `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
!
line con 0
logging synchronous
line aux 0
line vty 0 4
exec-timeout 720 0
password cisco
login
transport input telnet ssh
!
no scheduler allocate
!
end</entry>
</extensions>
<interface id="0" name="GigabitEthernet0/1"/>
</node>
<node name="R5" type="SIMPLE" subtype="IOSv" location="154,398">
<extensions>
<entry key="config" type="String">!
! Last configuration change at 15:48:51 UTC Thu Sep 3 2015
!
version 15.5
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R5
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-intf
!
address-family ipv4
exit-address-family
!
address-family ipv6
exit-address-family
!
enable password cisco
!
no aaa new-model
ethernet lmi ce
!
!
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
no ip domain lookup
ip cef
no ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
!
redundancy
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface GigabitEthernet0/0
vrf forwarding Mgmt-intf
ip address 10.255.2.117 255.255.0.0
duplex auto
speed auto
media-type rj45
!
interface GigabitEthernet0/1
ip address 10.1.6.5 255.255.255.0
duplex auto
speed auto
media-type rj45
!
!
router eigrp 1
network 10.1.6.0 0.0.0.255
eigrp router-id 5.5.5.5
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
!
!
!
!
control-plane
!
banner exec `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
banner incoming `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
banner login `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
!
line con 0
logging synchronous
line aux 0
line vty 0 4
exec-timeout 720 0
password cisco
login
transport input telnet ssh
!
no scheduler allocate
!
end</entry>
</extensions>
<interface id="0" name="GigabitEthernet0/1"/>
</node>
<node name="R2" type="SIMPLE" subtype="IOSv" location="642,69">
<extensions>
<entry key="config" type="String">!
! Last configuration change at 08:26:49 UTC Fri Sep 4 2015
!
version 15.5
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R2
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-intf
!
address-family ipv4
exit-address-family
!
address-family ipv6
exit-address-family
!
enable password cisco
!
no aaa new-model
ethernet lmi ce
!
!
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
no ip domain lookup
ip cef
no ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
!
redundancy
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface GigabitEthernet0/0
vrf forwarding Mgmt-intf
ip address 10.255.2.112 255.255.0.0
duplex auto
speed auto
media-type rj45
!
interface GigabitEthernet0/1
ip address 10.1.6.2 255.255.255.0
ip summary-address eigrp 1 172.10.0.0 255.255.192.0
duplex auto
speed auto
media-type rj45
!
interface GigabitEthernet0/2
bandwidth 900000
ip address 10.2.7.2 255.255.255.0
duplex auto
speed auto
media-type rj45
!
interface GigabitEthernet0/3
ip address 10.2.3.2 255.255.255.0
duplex auto
speed auto
media-type rj45
!
!
router eigrp 1
distribute-list route-map RM-CHANGE-RD out GigabitEthernet0/1
variance 2
network 10.1.6.0 0.0.0.255
network 10.2.3.0 0.0.0.255
network 10.2.7.0 0.0.0.255
eigrp router-id 2.2.2.2
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
!
!
ip prefix-list PL-172 seq 5 permit 172.20.30.0/24
!
route-map RM-CHANGE-RD permit 10
match ip address prefix-list PL-172
set metric 500000 3 255 1 1500
!
!
!
control-plane
!
banner exec `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
banner incoming `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
banner login `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
!
line con 0
logging synchronous
line aux 0
line vty 0 4
exec-timeout 720 0
password cisco
login
transport input telnet ssh
!
no scheduler allocate
!
end</entry>
</extensions>
<interface id="0" name="GigabitEthernet0/1"/>
<interface id="1" name="GigabitEthernet0/2"/>
<interface id="2" name="GigabitEthernet0/3"/>
</node>
<node name="R6" type="SIMPLE" subtype="IOSv" location="642,398">
<extensions>
<entry key="config" type="String">!
! Last configuration change at 08:54:16 UTC Fri Sep 4 2015
!
version 15.5
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R6
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-intf
!
address-family ipv4
exit-address-family
!
address-family ipv6
exit-address-family
!
enable password cisco
!
no aaa new-model
ethernet lmi ce
!
!
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
no ip domain lookup
ip cef
no ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
!
redundancy
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface Loopback0
ip address 20.0.0.6 255.255.255.0
!
interface GigabitEthernet0/0
vrf forwarding Mgmt-intf
ip address 10.255.2.116 255.255.0.0
duplex auto
speed auto
media-type rj45
!
interface GigabitEthernet0/1
ip address 10.1.6.6 255.255.255.0
ip summary-address eigrp 1 172.10.0.0 255.255.192.0
duplex auto
speed auto
media-type rj45
!
interface GigabitEthernet0/2
ip address 10.3.6.6 255.255.255.0
duplex auto
speed auto
media-type rj45
!
interface GigabitEthernet0/3
ip address 10.6.7.6 255.255.255.0
duplex auto
speed auto
media-type rj45
!
interface GigabitEthernet0/4
ip address 10.6.9.6 255.255.255.0
duplex auto
speed auto
media-type rj45
!
interface GigabitEthernet0/5
ip address 10.6.8.6 255.255.255.0
duplex auto
speed auto
media-type rj45
!
!
router eigrp 1
distribute-list route-map RM-CHANGE-RD out GigabitEthernet0/1
network 10.1.6.0 0.0.0.255
network 10.3.6.0 0.0.0.255
network 10.6.7.0 0.0.0.255
network 10.6.8.0 0.0.0.255
network 10.6.9.0 0.0.0.255
eigrp router-id 6.6.6.6
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
!
!
ip prefix-list PL-172 seq 5 permit 172.20.30.0/24
!
route-map RM-CHANGE-RD permit 10
match ip address prefix-list PL-172
set metric 1000000 4 255 1 1500
!
!
!
control-plane
!
banner exec `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
banner incoming `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
banner login `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
!
line con 0
logging synchronous
line aux 0
line vty 0 4
exec-timeout 720 0
password cisco
login
transport input telnet ssh
!
no scheduler allocate
!
end</entry>
</extensions>
<interface id="0" name="GigabitEthernet0/1"/>
<interface id="1" name="GigabitEthernet0/2"/>
<interface id="2" name="GigabitEthernet0/3"/>
<interface id="3" name="GigabitEthernet0/4"/>
<interface id="4" name="GigabitEthernet0/5"/>
</node>
<node name="R9" type="SIMPLE" subtype="IOSv" location="1015,701">
<extensions>
<entry key="config" type="String">!
! Last configuration change at 08:05:18 UTC Fri Sep 4 2015
!
version 15.5
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R9
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-intf
!
address-family ipv4
exit-address-family
!
address-family ipv6
exit-address-family
!
enable password cisco
!
no aaa new-model
ethernet lmi ce
!
!
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
no ip domain lookup
ip cef
no ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
!
redundancy
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface GigabitEthernet0/0
vrf forwarding Mgmt-intf
ip address 10.255.2.119 255.255.0.0
duplex auto
speed auto
media-type rj45
!
interface GigabitEthernet0/1
ip address 10.9.11.9 255.255.255.0
duplex auto
speed auto
media-type rj45
!
interface GigabitEthernet0/2
ip address 10.8.9.9 255.255.255.0
duplex auto
speed auto
media-type rj45
!
interface GigabitEthernet0/3
ip address 10.6.9.9 255.255.255.0
duplex auto
speed auto
media-type rj45
!
interface GigabitEthernet0/4
no ip address
shutdown
duplex auto
speed auto
media-type rj45
!
!
router eigrp 1
distribute-list route-map RM-Filter-Default out GigabitEthernet0/3
distribute-list route-map RM-Filter-Default out GigabitEthernet0/2
network 10.6.9.0 0.0.0.255
network 10.8.9.0 0.0.0.255
network 10.9.11.0 0.0.0.255
redistribute static metric 1000000 10 255 1 1500 route-map RM-Filter-Redist
offset-list 10 in 3 GigabitEthernet0/3
eigrp router-id 9.9.9.9
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
ip route 0.0.0.0 0.0.0.0 20.0.0.6
ip route 20.0.0.0 255.255.255.0 10.6.9.6
!
!
ip prefix-list PL-Default-Only seq 5 permit 0.0.0.0/0
!
route-map RM-Filter-Redist permit 10
match ip address prefix-list PL-Default-Only
!
route-map RM-Filter-Default deny 10
match ip address prefix-list PL-Default-Only
!
route-map RM-Filter-Default permit 20
!
!
access-list 10 permit 10.6.8.0 0.0.0.255
!
control-plane
!
banner exec `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
banner incoming `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
banner login `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
!
line con 0
logging synchronous
line aux 0
line vty 0 4
exec-timeout 720 0
password cisco
login
transport input telnet ssh
!
no scheduler allocate
!
end</entry>
</extensions>
<interface id="0" name="GigabitEthernet0/1"/>
<interface id="1" name="GigabitEthernet0/2"/>
<interface id="2" name="GigabitEthernet0/3"/>
<interface id="3" name="GigabitEthernet0/4"/>
</node>
<node name="R8" type="SIMPLE" subtype="IOSv" location="642,701">
<extensions>
<entry key="config" type="String">!
! Last configuration change at 15:49:20 UTC Thu Sep 3 2015
!
version 15.5
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R8
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-intf
!
address-family ipv4
exit-address-family
!
address-family ipv6
exit-address-family
!
enable password cisco
!
no aaa new-model
ethernet lmi ce
!
!
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
no ip domain lookup
ip cef
no ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
!
redundancy
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface GigabitEthernet0/0
vrf forwarding Mgmt-intf
ip address 10.255.2.120 255.255.0.0
duplex auto
speed auto
media-type rj45
!
interface GigabitEthernet0/1
ip address 10.8.10.8 255.255.255.0
duplex auto
speed auto
media-type rj45
!
interface GigabitEthernet0/2
ip address 10.8.9.8 255.255.255.0
duplex auto
speed auto
media-type rj45
!
interface GigabitEthernet0/3
ip address 10.6.8.8 255.255.255.0
duplex auto
speed auto
media-type rj45
!
!
router eigrp 1
distribute-list route-map RM-Filter-Default out GigabitEthernet0/3
distribute-list route-map RM-Filter-Default out GigabitEthernet0/2
network 10.6.8.0 0.0.0.255
network 10.8.9.0 0.0.0.255
network 10.8.10.0 0.0.0.255
redistribute static metric 1000000 10 255 1 1500 route-map RM-Filter-Redist
eigrp router-id 8.8.8.8
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
ip route 0.0.0.0 0.0.0.0 20.0.0.6
ip route 20.0.0.0 255.255.255.0 10.6.8.6
!
!
ip prefix-list PL-Default-Only seq 5 permit 0.0.0.0/0
!
route-map RM-Filter-Redist permit 10
match ip address prefix-list PL-Default-Only
!
route-map RM-Filter-Default deny 10
match ip address prefix-list PL-Default-Only
!
route-map RM-Filter-Default permit 20
!
!
!
control-plane
!
banner exec `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
banner incoming `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
banner login `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
!
line con 0
logging synchronous
line aux 0
line vty 0 4
exec-timeout 720 0
password cisco
login
transport input telnet ssh
!
no scheduler allocate
!
end</entry>
</extensions>
<interface id="0" name="GigabitEthernet0/1"/>
<interface id="1" name="GigabitEthernet0/2"/>
<interface id="2" name="GigabitEthernet0/3"/>
</node>
<node name="R10" type="SIMPLE" subtype="IOSv" location="639,994">
<extensions>
<entry key="config" type="String">!
! Last configuration change at 15:48:23 UTC Thu Sep 3 2015
!
version 15.5
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R10
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-intf
!
address-family ipv4
exit-address-family
!
address-family ipv6
exit-address-family
!
enable password cisco
!
no aaa new-model
ethernet lmi ce
!
!
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
no ip domain lookup
ip cef
no ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
!
redundancy
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface GigabitEthernet0/0
vrf forwarding Mgmt-intf
ip address 10.255.2.114 255.255.0.0
duplex auto
speed auto
media-type rj45
!
interface GigabitEthernet0/1
ip address 10.8.10.10 255.255.255.0
duplex auto
speed auto
media-type rj45
!
interface GigabitEthernet0/2
ip address 10.10.11.10 255.255.255.0
ip bandwidth-percent eigrp 1 10
ip hello-interval eigrp 1 2
ip hold-time eigrp 1 10
duplex auto
speed auto
media-type rj45
!
interface GigabitEthernet0/3
ip address 10.10.12.10 255.255.255.0
duplex auto
speed auto
media-type rj45
!
!
router eigrp 1
network 10.8.10.0 0.0.0.255
network 10.10.11.0 0.0.0.255
network 10.10.12.0 0.0.0.255
eigrp router-id 10.10.10.10
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
!
!
!
!
control-plane
!
banner exec `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
banner incoming `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
banner login `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
!
line con 0
logging synchronous
line aux 0
line vty 0 4
exec-timeout 720 0
password cisco
login
transport input telnet ssh
!
no scheduler allocate
!
end</entry>
</extensions>
<interface id="0" name="GigabitEthernet0/1"/>
<interface id="1" name="GigabitEthernet0/2"/>
<interface id="2" name="GigabitEthernet0/3"/>
</node>
<node name="R11" type="SIMPLE" subtype="IOSv" location="1012,994">
<extensions>
<entry key="config" type="String">!
! Last configuration change at 15:49:27 UTC Thu Sep 3 2015
!
version 15.5
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R11
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-intf
!
address-family ipv4
exit-address-family
!
address-family ipv6
exit-address-family
!
enable password cisco
!
no aaa new-model
ethernet lmi ce
!
!
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
no ip domain lookup
ip cef
no ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
!
redundancy
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface GigabitEthernet0/0
vrf forwarding Mgmt-intf
ip address 10.255.2.121 255.255.0.0
duplex auto
speed auto
media-type rj45
!
interface GigabitEthernet0/1
ip address 10.9.11.11 255.255.255.0
duplex auto
speed auto
media-type rj45
!
interface GigabitEthernet0/2
ip address 10.10.11.11 255.255.255.0
ip bandwidth-percent eigrp 1 10
ip hello-interval eigrp 1 3
ip hold-time eigrp 1 10
duplex auto
speed auto
media-type rj45
!
interface GigabitEthernet0/3
ip address 10.11.12.11 255.255.255.0
duplex auto
speed auto
media-type rj45
!
!
router eigrp 1
network 10.9.11.0 0.0.0.255
network 10.10.11.0 0.0.0.255
network 10.10.12.0 0.0.0.255
network 10.11.12.0 0.0.0.255
eigrp router-id 11.11.11.11
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
!
!
!
!
control-plane
!
banner exec `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
banner incoming `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
banner login `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
!
line con 0
logging synchronous
line aux 0
line vty 0 4
exec-timeout 720 0
password cisco
login
transport input telnet ssh
!
no scheduler allocate
!
end</entry>
</extensions>
<interface id="0" name="GigabitEthernet0/1"/>
<interface id="1" name="GigabitEthernet0/2"/>
<interface id="2" name="GigabitEthernet0/3"/>
</node>
<node name="R7" type="SIMPLE" subtype="IOSv" location="1015,398">
<extensions>
<entry key="config" type="String">!
! Last configuration change at 15:48:32 UTC Thu Sep 3 2015
!
version 15.5
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R7
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-intf
!
address-family ipv4
exit-address-family
!
address-family ipv6
exit-address-family
!
enable password cisco
!
no aaa new-model
ethernet lmi ce
!
!
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
no ip domain lookup
ip cef
no ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
!
redundancy
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface GigabitEthernet0/0
vrf forwarding Mgmt-intf
ip address 10.255.2.115 255.255.0.0
duplex auto
speed auto
media-type rj45
!
interface GigabitEthernet0/1
ip address 10.4.7.7 255.255.255.0
duplex auto
speed auto
media-type rj45
!
interface GigabitEthernet0/2
ip address 10.2.7.7 255.255.255.0
duplex auto
speed auto
media-type rj45
!
interface GigabitEthernet0/3
ip address 10.6.7.7 255.255.255.0
duplex auto
speed auto
media-type rj45
!
interface GigabitEthernet0/4
no ip address
shutdown
duplex auto
speed auto
media-type rj45
!
!
router eigrp 1
network 10.2.7.0 0.0.0.255
network 10.4.7.0 0.0.0.255
network 10.6.7.0 0.0.0.255
eigrp router-id 7.7.7.7
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
!
!
!
!
control-plane
!
banner exec `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
banner incoming `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
banner login `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
!
line con 0
logging synchronous
line aux 0
line vty 0 4
exec-timeout 720 0
password cisco
login
transport input telnet ssh
!
no scheduler allocate
!
end</entry>
</extensions>
<interface id="0" name="GigabitEthernet0/1"/>
<interface id="1" name="GigabitEthernet0/2"/>
<interface id="2" name="GigabitEthernet0/3"/>
<interface id="3" name="GigabitEthernet0/4"/>
</node>
<node name="R3" type="SIMPLE" subtype="IOSv" location="1015,69">
<extensions>
<entry key="config" type="String">!
! Last configuration change at 15:48:03 UTC Thu Sep 3 2015
!
version 15.5
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R3
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-intf
!
address-family ipv4
exit-address-family
!
address-family ipv6
exit-address-family
!
enable password cisco
!
no aaa new-model
ethernet lmi ce
!
!
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
no ip domain lookup
ip cef
no ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
!
redundancy
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface GigabitEthernet0/0
vrf forwarding Mgmt-intf
ip address 10.255.2.111 255.255.0.0
duplex auto
speed auto
media-type rj45
!
interface GigabitEthernet0/1
ip address 10.3.4.3 255.255.255.0
duplex auto
speed auto
media-type rj45
!
interface GigabitEthernet0/2
ip address 10.3.6.3 255.255.255.0
duplex auto
speed auto
media-type rj45
!
interface GigabitEthernet0/3
ip address 10.2.3.3 255.255.255.0
duplex auto
speed auto
media-type rj45
!
interface GigabitEthernet0/4
no ip address
shutdown
duplex auto
speed auto
media-type rj45
!
!
router eigrp 1
network 10.2.3.0 0.0.0.255
network 10.3.4.0 0.0.0.255
network 10.3.6.0 0.0.0.255
eigrp router-id 3.3.3.3
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
!
!
!
!
control-plane
!
banner exec `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
banner incoming `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
banner login `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
!
line con 0
logging synchronous
line aux 0
line vty 0 4
exec-timeout 720 0
password cisco
login
transport input telnet ssh
!
no scheduler allocate
!
end</entry>
</extensions>
<interface id="0" name="GigabitEthernet0/1"/>
<interface id="1" name="GigabitEthernet0/2"/>
<interface id="2" name="GigabitEthernet0/3"/>
<interface id="3" name="GigabitEthernet0/4"/>
</node>
<node name="R4" type="SIMPLE" subtype="IOSv" location="1268,243">
<extensions>
<entry key="config" type="String">!
! Last configuration change at 08:19:35 UTC Fri Sep 4 2015
!
version 15.5
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R4
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-intf
!
address-family ipv4
exit-address-family
!
address-family ipv6
exit-address-family
!
enable password cisco
!
no aaa new-model
ethernet lmi ce
!
!
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
no ip domain lookup
ip cef
no ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
!
redundancy
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface GigabitEthernet0/0
vrf forwarding Mgmt-intf
ip address 10.255.2.118 255.255.0.0
duplex auto
speed auto
media-type rj45
!
interface GigabitEthernet0/1
ip address 10.3.4.4 255.255.255.0
duplex auto
speed auto
media-type rj45
!
interface GigabitEthernet0/2
ip address 10.4.7.4 255.255.255.0
duplex auto
speed auto
media-type rj45
!
interface GigabitEthernet0/3
no ip address
duplex auto
speed auto
media-type rj45
!
interface GigabitEthernet0/3.10
encapsulation dot1Q 10
ip address 172.20.10.4 255.255.255.0
!
interface GigabitEthernet0/3.20
encapsulation dot1Q 20
ip address 172.20.20.4 255.255.255.0
!
interface GigabitEthernet0/3.30
encapsulation dot1Q 30
ip address 172.20.30.4 255.255.255.0
!
!
router eigrp 1
network 10.3.4.0 0.0.0.255
network 10.4.7.0 0.0.0.255
network 172.20.10.0 0.0.0.255
network 172.20.20.0 0.0.0.255
network 172.20.30.0 0.0.0.255
passive-interface GigabitEthernet0/3.20
passive-interface GigabitEthernet0/3.30
passive-interface GigabitEthernet0/3.10
eigrp router-id 4.4.4.4
eigrp stub connected summary
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
!
!
!
!
control-plane
!
banner exec `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
banner incoming `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
banner login `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
!
line con 0
logging synchronous
line aux 0
line vty 0 4
exec-timeout 720 0
password cisco
login
transport input telnet ssh
!
no scheduler allocate
!
end</entry>
</extensions>
<interface id="0" name="GigabitEthernet0/1"/>
<interface id="1" name="GigabitEthernet0/2"/>
<interface id="2" name="GigabitEthernet0/3"/>
</node>
<node name="SW1" type="SIMPLE" subtype="IOSvL2" location="394,249">
<extensions>
<entry key="config" type="String">!
! Last configuration change at 09:10:26 UTC Fri Sep 4 2015
!
version 15.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
service compress-config
!
hostname SW1
!
boot-start-marker
boot-end-marker
!
!
!
no aaa new-model
!
!
!
!
!
!
!
!
ip cef
no ipv6 cef
!
!
!
spanning-tree mode rapid-pvst
spanning-tree extend system-id
!
vlan internal allocation policy ascending
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface GigabitEthernet0/0
media-type rj45
negotiation auto
!
interface GigabitEthernet0/1
switchport access vlan 10
switchport mode access
media-type rj45
negotiation auto
!
interface GigabitEthernet0/2
switchport access vlan 10
switchport mode access
media-type rj45
negotiation auto
!
interface GigabitEthernet0/3
switchport access vlan 10
switchport mode access
media-type rj45
negotiation auto
!
interface GigabitEthernet1/0
switchport access vlan 10
switchport mode access
media-type rj45
negotiation auto
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
!
!
!
!
!
control-plane
!
banner exec `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
banner incoming `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
banner login `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
!
line con 0
line aux 0
line vty 0 4
login
!
!
end</entry>
</extensions>
<interface id="0" name="GigabitEthernet0/1"/>
<interface id="1" name="GigabitEthernet0/2"/>
<interface id="2" name="GigabitEthernet0/3"/>
<interface id="3" name="GigabitEthernet1/0"/>
</node>
<node name="SW2" type="SIMPLE" subtype="IOSvL2" location="1261,488">
<extensions>
<entry key="config" type="String">!
! Last configuration change at 09:10:58 UTC Fri Sep 4 2015
!
version 15.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
service compress-config
!
hostname SW2
!
boot-start-marker
boot-end-marker
!
!
!
no aaa new-model
!
!
!
!
!
!
!
!
ip cef
no ipv6 cef
!
!
!
spanning-tree mode rapid-pvst
spanning-tree extend system-id
!
vlan internal allocation policy ascending
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface GigabitEthernet0/0
media-type rj45
negotiation auto
!
interface GigabitEthernet0/1
switchport trunk encapsulation dot1q
switchport mode trunk
media-type rj45
negotiation auto
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
!
!
!
!
!
control-plane
!
banner exec `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
banner incoming `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
banner login `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
!
line con 0
line aux 0
line vty 0 4
login
!
!
end</entry>
</extensions>
<interface id="0" name="GigabitEthernet0/1"/>
</node>
<node name="R12" type="SIMPLE" subtype="IOSv" location="790,1206">
<extensions>
<entry key="config" type="String">!
! Last configuration change at 15:49:37 UTC Thu Sep 3 2015
!
version 15.5
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R12
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-intf
!
address-family ipv4
exit-address-family
!
address-family ipv6
exit-address-family
!
enable password cisco
!
no aaa new-model
ethernet lmi ce
!
!
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
no ip domain lookup
ip cef
no ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
!
redundancy
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface GigabitEthernet0/0
vrf forwarding Mgmt-intf
ip address 10.255.2.122 255.255.0.0
duplex auto
speed auto
media-type rj45
!
interface GigabitEthernet0/1
no ip address
duplex auto
speed auto
media-type rj45
!
interface GigabitEthernet0/1.10
encapsulation dot1Q 10
ip address 172.10.10.12 255.255.255.0
ip policy route-map RM-DIRECT
!
interface GigabitEthernet0/1.20
encapsulation dot1Q 20
ip address 172.10.20.12 255.255.255.128
ip policy route-map RM-DIRECT
!
interface GigabitEthernet0/1.30
encapsulation dot1Q 30
ip address 172.10.30.12 255.255.255.192
ip policy route-map RM-DIRECT
!
interface GigabitEthernet0/1.40
encapsulation dot1Q 40
ip address 172.10.40.12 255.255.255.224
ip policy route-map RM-DIRECT
!
interface GigabitEthernet0/1.50
encapsulation dot1Q 50
ip address 172.10.50.12 255.255.255.240
ip policy route-map RM-DIRECT
!
interface GigabitEthernet0/2
ip address 10.10.12.12 255.255.255.0
duplex auto
speed auto
media-type rj45
!
interface GigabitEthernet0/3
ip address 10.11.12.12 255.255.255.0
duplex auto
speed auto
media-type rj45
!
!
router eigrp 1
network 10.10.12.0 0.0.0.255
network 10.11.12.0 0.0.0.255
network 172.10.10.0 0.0.0.255
network 172.10.20.0 0.0.0.127
network 172.10.30.0 0.0.0.63
network 172.10.40.0 0.0.0.31
network 172.10.50.0 0.0.0.15
passive-interface GigabitEthernet0/1.20
passive-interface GigabitEthernet0/1.30
passive-interface GigabitEthernet0/1.40
passive-interface GigabitEthernet0/1.50
passive-interface GigabitEthernet0/1.10
eigrp router-id 12.12.12.12
!
ip local policy route-map RM-DIRECT-LOCAL
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
!
!
route-map RM-DIRECT permit 10
match ip address 100
set ip next-hop 10.10.12.10
!
route-map RM-DIRECT permit 20
match ip address 101
set ip next-hop 10.11.12.11
!
route-map RM-DIRECT permit 30
match ip address 102
set ip next-hop 10.10.12.10
!
route-map RM-DIRECT permit 40
match ip address 104
set ip next-hop 10.11.12.11
!
route-map RM-DIRECT permit 50
match ip address 105
set ip next-hop 10.10.12.10
!
route-map RM-DIRECT-LOCAL permit 10
match ip address 103
set ip next-hop 10.11.12.11
!
!
access-list 100 permit ip 172.10.10.0 0.0.0.255 10.2.3.0 0.0.0.255
access-list 101 permit ip 172.10.30.0 0.0.0.63 10.2.3.0 0.0.0.255
access-list 101 permit ip 172.10.20.0 0.0.0.127 10.2.3.0 0.0.0.255
access-list 102 permit ip 172.10.40.0 0.0.0.31 10.4.7.0 0.0.0.255
access-list 103 permit ip any 10.1.6.0 0.0.0.255
access-list 104 permit ip any 10.3.4.0 0.0.0.255
access-list 105 permit ip any 10.2.7.0 0.0.0.255
!
control-plane
!
banner exec `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
banner incoming `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
banner login `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
!
line con 0
logging synchronous
line aux 0
line vty 0 4
exec-timeout 720 0
password cisco
login
transport input telnet ssh
!
no scheduler allocate
!
end</entry>
</extensions>
<interface id="0" name="GigabitEthernet0/1"/>
<interface id="1" name="GigabitEthernet0/2"/>
<interface id="2" name="GigabitEthernet0/3"/>
</node>
<node name="SW3" type="SIMPLE" subtype="IOSvL2" location="147,1211">
<extensions>
<entry key="config" type="String">!
! Last configuration change at 09:14:31 UTC Fri Sep 4 2015
!
version 15.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
service compress-config
!
hostname SW3
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-intf
!
address-family ipv4
exit-address-family
!
address-family ipv6
exit-address-family
!
enable password cisco
!
no aaa new-model
!
!
!
!
!
no ip routing
!
!
!
no ip domain-lookup
no ip cef
no ipv6 cef
!
!
!
spanning-tree mode rapid-pvst
spanning-tree extend system-id
!
vlan internal allocation policy ascending
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface GigabitEthernet0/0
media-type rj45
negotiation auto
!
interface GigabitEthernet0/1
switchport trunk encapsulation dot1q
switchport mode trunk
media-type rj45
negotiation auto
!
interface Vlan10
ip address 172.10.10.20 255.255.255.0
no ip route-cache
!
interface Vlan20
ip address 172.10.20.20 255.255.255.128
!
interface Vlan30
ip address 172.10.30.20 255.255.255.192
shutdown
!
interface Vlan40
ip address 172.10.40.20 255.255.255.224
!
ip default-gateway 172.10.40.12
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
!
!
!
!
!
control-plane
!
banner exec `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
banner incoming `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
banner login `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
!
line con 0
logging synchronous
line aux 0
line vty 0 4
exec-timeout 720 0
password cisco
login
transport input telnet ssh
!
!
end</entry>
</extensions>
<interface id="0" name="GigabitEthernet0/1"/>
</node>
<connection dst="/virl:topology/virl:node[12]/virl:interface[1]" src="/virl:topology/virl:node[1]/virl:interface[1]"/>
<connection dst="/virl:topology/virl:node[2]/virl:interface[1]" src="/virl:topology/virl:node[12]/virl:interface[2]"/>
<connection dst="/virl:topology/virl:node[3]/virl:interface[1]" src="/virl:topology/virl:node[12]/virl:interface[3]"/>
<connection dst="/virl:topology/virl:node[4]/virl:interface[1]" src="/virl:topology/virl:node[12]/virl:interface[4]"/>
<connection dst="/virl:topology/virl:node[11]/virl:interface[1]" src="/virl:topology/virl:node[10]/virl:interface[1]"/>
<connection dst="/virl:topology/virl:node[11]/virl:interface[2]" src="/virl:topology/virl:node[9]/virl:interface[1]"/>
<connection dst="/virl:topology/virl:node[11]/virl:interface[3]" src="/virl:topology/virl:node[13]/virl:interface[1]"/>
<connection dst="/virl:topology/virl:node[9]/virl:interface[2]" src="/virl:topology/virl:node[3]/virl:interface[2]"/>
<connection dst="/virl:topology/virl:node[10]/virl:interface[2]" src="/virl:topology/virl:node[4]/virl:interface[2]"/>
<connection dst="/virl:topology/virl:node[10]/virl:interface[3]" src="/virl:topology/virl:node[3]/virl:interface[3]"/>
<connection dst="/virl:topology/virl:node[9]/virl:interface[3]" src="/virl:topology/virl:node[4]/virl:interface[3]"/>
<connection dst="/virl:topology/virl:node[5]/virl:interface[1]" src="/virl:topology/virl:node[8]/virl:interface[1]"/>
<connection dst="/virl:topology/virl:node[7]/virl:interface[1]" src="/virl:topology/virl:node[6]/virl:interface[1]"/>
<connection dst="/virl:topology/virl:node[8]/virl:interface[2]" src="/virl:topology/virl:node[7]/virl:interface[2]"/>
<connection dst="/virl:topology/virl:node[5]/virl:interface[2]" src="/virl:topology/virl:node[6]/virl:interface[2]"/>
<connection dst="/virl:topology/virl:node[14]/virl:interface[1]" src="/virl:topology/virl:node[15]/virl:interface[1]"/>
<connection dst="/virl:topology/virl:node[7]/virl:interface[3]" src="/virl:topology/virl:node[14]/virl:interface[2]"/>
<connection dst="/virl:topology/virl:node[8]/virl:interface[3]" src="/virl:topology/virl:node[14]/virl:interface[3]"/>
<connection dst="/virl:topology/virl:node[5]/virl:interface[3]" src="/virl:topology/virl:node[4]/virl:interface[4]"/>
<connection dst="/virl:topology/virl:node[6]/virl:interface[3]" src="/virl:topology/virl:node[4]/virl:interface[5]"/>
</topology>