Permalink
Browse files

Config.h basic settings for mg prusa

  • Loading branch information...
1 parent fc5e0e8 commit ada20e7d9a01186cfa5e88f79fc8215f50ee3d53 @jcwilk committed Jan 22, 2013
Showing with 5 additions and 5 deletions.
  1. +5 −5 Sprinter/Configuration.h
View
@@ -17,7 +17,7 @@
// Gen 3 Plus = 21
// gen 3 Monolithic Electronics = 22
// Gen3 PLUS for TechZone Gen3 Remix Motherboard = 23
-#define MOTHERBOARD 33
+#define MOTHERBOARD 3
//// Thermistor settings:
// 1 is 100k thermistor
@@ -32,7 +32,7 @@
//// Calibration variables
// X, Y, Z, E steps per unit - Metric Prusa Mendel with Wade extruder:
-#define _AXIS_STEP_PER_UNIT {80, 80, 3200/1.25,700}
+#define _AXIS_STEP_PER_UNIT {80, 80, 3200/1.25,1380}
// Metric Prusa Mendel with Makergear geared stepper extruder:
//#define _AXIS_STEP_PER_UNIT {80,80,3200/1.25,1380}
// MakerGear Hybrid Prusa Mendel:
@@ -45,9 +45,9 @@
// The pullups are needed if you directly connect a mechanical endswitch between the signal and ground pins.
//If your axes are only moving in one direction, make sure the endstops are connected properly.
//If your axes move in one direction ONLY when the endstops are triggered, set [XYZ]_ENDSTOP_INVERT to true here:
-const bool X_ENDSTOP_INVERT = false;
-const bool Y_ENDSTOP_INVERT = false;
-const bool Z_ENDSTOP_INVERT = false;
+const bool X_ENDSTOP_INVERT = true;
+const bool Y_ENDSTOP_INVERT = true;
+const bool Z_ENDSTOP_INVERT = true;
// This determines the communication speed of the printer
#define BAUDRATE 115200

0 comments on commit ada20e7

Please sign in to comment.