Skip to content
Browse files

br tree sync

  • Loading branch information...
1 parent 81185ad commit 73e143c41b76646c95888d9a3f3f743bfe530b3e @jcwoltz committed
Showing with 6,198 additions and 1,490 deletions.
  1. +38 −0 br-e10-next/CHANGES
  2. +27 −13 br-e10-next/Config.in
  3. +6 −1 br-e10-next/Makefile
  4. +247 −0 br-e10-next/board/avnet/s6lx9_microboard/lx9_mmu.dts
  5. +68 −0 br-e10-next/board/avnet/s6lx9_microboard/lx9_mmu_defconfig
  6. +70 −0 br-e10-next/board/avnet/s6lx9_microboard/readme.txt
  7. 0 ...board/qemu/arm-versatile/linux-3.2.config → br-e10-next/board/qemu/arm-versatile/linux-3.3.config
  8. +68 −0 br-e10-next/board/qemu/microblazebe-mmu/kernel-3.3.config
  9. +6 −0 br-e10-next/board/qemu/microblazebe-mmu/readme.txt
  10. +367 −0 br-e10-next/board/qemu/microblazebe-mmu/system.dts
  11. +67 −0 br-e10-next/board/qemu/microblazeel-mmu/kernel-3.3.config
  12. +6 −0 br-e10-next/board/qemu/microblazeel-mmu/readme.txt
  13. +367 −0 br-e10-next/board/qemu/microblazeel-mmu/system.dts
  14. 0 ...-recv/board/qemu/mips-malta/linux-3.2.config → br-e10-next/board/qemu/mips-malta/linux-3.3.config
  15. 0 ...v/board/qemu/mipsel-malta/linux-3.2.config → br-e10-next/board/qemu/mipsel-malta/linux-3.3.config
  16. 0 ...d/qemu/powerpc-g3beige/linux-3.2.config → br-e10-next/board/qemu/powerpc-g3beige/linux-3.3.config
  17. 0 br-e10-recv/board/qemu/x86_64/linux-3.2.config → br-e10-next/board/qemu/x86/linux-3.3.config
  18. +1 −1 br-e10-next/board/qemu/x86/readme.txt
  19. 0 br-e10-recv/board/qemu/x86/linux-3.2.config → br-e10-next/board/qemu/x86_64/linux-3.3.config
  20. +5 −1 br-e10-next/boot/barebox/Config.in
  21. +2 −0 br-e10-next/boot/syslinux/Config.in
  22. +5 −1 br-e10-next/configs/at91sam9260dfc_defconfig
  23. +4 −0 br-e10-next/configs/at91sam9261ek_defconfig
  24. +4 −0 br-e10-next/configs/at91sam9263ek_defconfig
  25. +4 −0 br-e10-next/configs/at91sam9g20dfc_defconfig
  26. +0 −3 br-e10-next/configs/atngw100_defconfig
  27. +6 −0 br-e10-next/configs/ea3250_defconfig
  28. +6 −0 br-e10-next/configs/fdi3250_defconfig
  29. +6 −0 br-e10-next/configs/phy3250_defconfig
  30. +2 −2 br-e10-next/configs/qemu_arm_versatile_defconfig
  31. +16 −0 br-e10-next/configs/qemu_microblazebe_mmu_defconfig
  32. +17 −0 br-e10-next/configs/qemu_microblazeel_mmu_defconfig
  33. +2 −2 br-e10-next/configs/qemu_mips_malta_defconfig
  34. +2 −2 br-e10-next/configs/qemu_mipsel_malta_defconfig
  35. +2 −2 br-e10-next/configs/qemu_ppc_g3beige_defconfig
  36. +4 −1 br-e10-next/configs/qemu_sh4_r2d_defconfig
  37. +1 −1 br-e10-next/configs/qemu_sparc_ss10_defconfig
  38. +2 −2 br-e10-next/configs/qemu_x86_64_defconfig
  39. +2 −2 br-e10-next/configs/qemu_x86_defconfig
  40. +17 −0 br-e10-next/configs/s6lx9_microboard_defconfig
  41. +28 −13 br-e10-next/docs/buildroot.html
  42. +55 −1 br-e10-next/docs/manual/adding-packages-directory.txt
  43. +8 −8 br-e10-next/docs/manual/adding-packages-handwritten.txt
  44. +4 −0 br-e10-next/docs/manual/rebuilding-packages.txt
  45. +1 −1 br-e10-next/docs/manual/using.txt
  46. +1 −1 br-e10-next/fs/skeleton/etc/init.d/S40network
  47. +1 −1 br-e10-next/fs/skeleton/etc/mtab
  48. +2 −0 br-e10-next/fs/skeleton/etc/securetty
  49. +12 −4 br-e10-next/linux/Config.in
  50. +19 −1 br-e10-next/linux/linux.mk
  51. +17 −1 br-e10-next/package/Config.in
  52. +1 −0 br-e10-next/package/Config.in.host
  53. +1 −0 br-e10-next/package/Makefile.in
  54. +16 −8 br-e10-next/package/Makefile.package.in
  55. +8 −0 br-e10-next/package/apr/Config.in
  56. +18 −0 br-e10-next/package/apr/apr.mk
  57. +1 −0 br-e10-next/package/at/Config.in
  58. +1 −1 br-e10-next/package/at/S99at
  59. +0 −3 br-e10-next/package/at/at.mk
  60. +681 −0 br-e10-next/package/atk/atk-glib-fix.patch
  61. +0 −1 br-e10-next/package/atk/atk.mk
  62. +0 −1 br-e10-next/package/avahi/avahi.mk
  63. +2 −0 br-e10-next/package/bind/Config.in
  64. +1 −1 br-e10-next/package/bind/bind.mk
  65. +0 −3 br-e10-next/package/blackbox/blackbox.mk
  66. +1 −1 br-e10-next/package/bluez_utils/bluez_utils.mk
  67. +13 −4 br-e10-next/package/boost/Config.in
  68. +21 −16 br-e10-next/package/boost/boost.mk
  69. +1 −1 br-e10-next/package/busybox/S01logging
  70. +1 −1 br-e10-next/package/busybox/S10mdev
  71. +2 −2 br-e10-next/package/can-utils/can-utils.mk
  72. +21 −2 br-e10-next/package/ccache/ccache.mk
  73. +1 −1 br-e10-next/package/coreutils/coreutils.mk
  74. +0 −1 br-e10-next/package/crosstool-ng/crosstool-ng.mk
  75. +1 −1 br-e10-next/package/cups/cups.mk
  76. +0 −1 br-e10-next/package/dbus-python/dbus-python.mk
  77. +1 −1 br-e10-next/package/dbus/S30dbus
  78. +4 −0 br-e10-next/package/dbus/dbus.mk
  79. +2 −2 br-e10-next/package/dhcp/dhcp.mk
  80. +0 −1 br-e10-next/package/directfb-examples/directfb-examples.mk
  81. +1 −1 br-e10-next/package/directfb/directfb.mk
  82. +0 −1 br-e10-next/package/divine/divine.mk
  83. +10 −3 br-e10-next/package/dnsmasq/Config.in
  84. +24 −6 br-e10-next/package/dnsmasq/dnsmasq.mk
  85. +0 −3 br-e10-next/package/docker/docker.mk
  86. +2 −2 br-e10-next/package/dosfstools/dosfstools.mk
  87. +1 −1 br-e10-next/package/dropbear/S50dropbear
  88. +0 −22 br-e10-next/package/e2fsprogs/e2fsprogs-fallocate.patch
  89. +1 −1 br-e10-next/package/e2fsprogs/e2fsprogs.mk
  90. +8 −0 br-e10-next/package/efl/libethumb/libethumb.mk
  91. +0 −3 br-e10-next/package/enchant/enchant.mk
  92. +2 −2 br-e10-next/package/expat/expat.mk
  93. +0 −20 br-e10-next/package/fakeroot/fakeroot-doc.patch
  94. +0 −14 br-e10-next/package/fakeroot/fakeroot-uclibc-LFS.patch
  95. +3 −15 br-e10-next/package/fakeroot/fakeroot.mk
  96. +0 −1 br-e10-next/package/fbdump/fbdump.mk
  97. +1 −1 br-e10-next/package/feh/feh.mk
  98. +1 −1 br-e10-next/package/file/file.mk
  99. +0 −10 br-e10-next/package/fis/fis-002-makefile.patch
  100. +14 −41 br-e10-next/package/fis/fis.mk
  101. +0 −5 br-e10-next/package/fltk/fltk.mk
  102. +9 −0 br-e10-next/package/fmtools/Config.in
  103. +19 −0 br-e10-next/package/fmtools/fmtools.mk
  104. +0 −1 br-e10-next/package/fontconfig/fontconfig.mk
  105. +1 −1 br-e10-next/package/freetype/freetype.mk
  106. +24 −0 br-e10-next/package/games/doom-wad/doom-wad.mk
  107. +0 −35 br-e10-next/package/games/doom-wad/doom-wads.mk
  108. +0 −2 br-e10-next/package/games/rubix/rubix.mk
  109. +1 −1 br-e10-next/package/gawk/gawk.mk
  110. +0 −1 br-e10-next/package/gdk-pixbuf/Config.in
  111. +3 −7 br-e10-next/package/gdk-pixbuf/gdk-pixbuf.mk
  112. +1 −1 br-e10-next/package/gettext/gettext.mk
  113. +127 −0 br-e10-next/package/giblib/giblib-fix-imlib2-detection.patch
  114. +4 −2 br-e10-next/package/giblib/giblib.mk
  115. +8 −2 br-e10-next/package/glib-networking/glib-networking.mk
  116. +1 −1 br-e10-next/package/gmp/gmp.mk
  117. +58 −0 br-e10-next/package/gnutls/gnutls-correct_rpl_gettimeofday_signature.patch
  118. +5 −4 br-e10-next/package/gnutls/gnutls.mk
  119. +2 −0 br-e10-next/package/gpsd/Config.in
  120. +1 −1 br-e10-next/package/gpsd/S50gpsd
  121. +2 −2 br-e10-next/package/gpsd/gpsd.mk
  122. +0 −4 br-e10-next/package/gqview/gqview.mk
  123. +1 −1 br-e10-next/package/grep/grep.mk
  124. +0 −1 br-e10-next/package/gtkperf/gtkperf.mk
  125. +0 −2 br-e10-next/package/gvfs/gvfs.mk
  126. +3 −1 br-e10-next/package/haserl/haserl.mk
  127. +1 −1 br-e10-next/package/hdparm/hdparm.mk
  128. +26 −0 br-e10-next/package/hiawatha/Config.in
  129. +60 −0 br-e10-next/package/hiawatha/hiawatha-support-for-external-polarssl.patch
  130. +13 −0 br-e10-next/package/hiawatha/hiawatha.mk
  131. 0 ...6.6.4-8-use-xml2-config.patch → br-e10-next/package/imagemagick/imagemagick-use-xml2-config.patch
  132. +227 −0 br-e10-next/package/imagemagick/imagemagick-zlib-fix.patch
  133. +20 −4 br-e10-next/package/imagemagick/imagemagick.mk
  134. +0 −5 br-e10-next/package/iperf/iperf.mk
  135. +0 −2 br-e10-next/package/ipkg/ipkg.mk
  136. +0 −34 br-e10-next/package/iptables/iptables-3.2-headers-fix.patch
  137. +1 −1 br-e10-next/package/iptables/iptables.mk
  138. +1 −1 br-e10-next/package/iw/iw.mk
  139. +0 −1 br-e10-next/package/jpeg/jpeg.mk
  140. +7 −1 br-e10-next/package/kmod/Config.in
  141. +28 −2 br-e10-next/package/kmod/kmod.mk
  142. +7 −0 br-e10-next/package/lcdproc/Config.in
  143. +18 −0 br-e10-next/package/lcdproc/lcdproc-0.5.5-LCDd.conf.patch
  144. +14 −0 br-e10-next/package/lcdproc/lcdproc.mk
  145. +0 −4 br-e10-next/package/leafpad/leafpad.mk
  146. +0 −1 br-e10-next/package/libarchive/libarchive.mk
  147. +1 −0 br-e10-next/package/libatomic_ops/Config.in
  148. +10 −0 br-e10-next/package/libcap-ng/Config.in
  149. +14 −0 br-e10-next/package/libcap-ng/libcap-ng.mk
  150. +4 −7 br-e10-next/package/libconfig/libconfig.mk
  151. +0 −2 br-e10-next/package/libconfuse/libconfuse.mk
  152. +2 −2 br-e10-next/package/libcurl/libcurl.mk
  153. +7 −0 br-e10-next/package/libdmtx/Config.in
  154. +12 −0 br-e10-next/package/libdmtx/libdmtx.mk
  155. +0 −1 br-e10-next/package/libdnet/libdnet.mk
  156. +4 −1 br-e10-next/package/libdrm/Config.in
  157. +0 −3 br-e10-next/package/libevent/libevent.mk
  158. +1 −1 br-e10-next/package/libffi/libffi.mk
  159. +2 −2 br-e10-next/package/libfuse/libfuse.mk
  160. +0 −2 br-e10-next/package/libgail/libgail.mk
  161. +1 −2 br-e10-next/package/libgtk2/libgtk2.mk
  162. +5 −1 br-e10-next/package/libhid/libhid.mk
  163. +2 −3 br-e10-next/package/libnl/libnl.mk
  164. +2 −2 br-e10-next/package/libpng/libpng.mk
  165. +0 −1 br-e10-next/package/librsvg/librsvg.mk
  166. +0 −2 br-e10-next/package/librsync/librsync.mk
  167. +0 −2 br-e10-next/package/libsexy/libsexy.mk
  168. +1 −1 br-e10-next/package/libsigc/libsigc.mk
  169. +0 −2 br-e10-next/package/libsvgtiny/libsvgtiny.mk
  170. +6 −0 br-e10-next/package/libtpl/Config.in
  171. +11 −0 br-e10-next/package/libtpl/libtpl.mk
  172. +0 −2 br-e10-next/package/libungif/libungif.mk
  173. +37 −0 br-e10-next/package/libupnp/libupnp-1.6.17-no-ipv6.patch
  174. +0 −11 br-e10-next/package/libupnp/libupnp-1.6.6-remove-sys_timeb.h.patch
  175. +4 −5 br-e10-next/package/libupnp/libupnp.mk
  176. +1 −0 br-e10-next/package/liburcu/Config.in
  177. +0 −1 br-e10-next/package/libusb-compat/libusb-compat.mk
  178. +8 −1 br-e10-next/package/libxml-parser-perl/libxml-parser-perl.mk
  179. +21 −0 br-e10-next/package/libxml2/libxml2-0-allocation-error-copying-entities.patch
  180. +101 −0 br-e10-next/package/libxml2/libxml2-1-reallocation-failures.patch
  181. +297 −0 br-e10-next/package/libxml2/libxml2-2-hash-randomization.patch
  182. +29 −0 br-e10-next/package/libxml2/libxml2-3-xpath-memory.patch
  183. +32 −0 br-e10-next/package/libxml2/libxml2-4-xpath-freeing.patch
  184. +28 −0 br-e10-next/package/libxml2/libxml2-5-xpath-freeing2.patch
  185. +224 −0 br-e10-next/package/libxml2/libxml2-6-hardening-xpath.patch
  186. +62 −0 br-e10-next/package/libxml2/libxml2-7-error-xpath.patch
  187. +1 −0 br-e10-next/package/libxml2/libxml2.mk
  188. 0 ...kage/libxslt/libxslt-configure.patch → br-e10-next/package/libxslt/libxslt-1.1.26-configure.patch
  189. +56 −0 br-e10-next/package/libxslt/libxslt-1.1.26-id-generation.patch
  190. +27 −0 br-e10-next/package/libxslt/libxslt-1.1.26-pattern-out-of-bounds-read.patch
  191. +5 −0 br-e10-next/package/linux-firmware/Config.in
  192. +12 −2 br-e10-next/package/linux-firmware/linux-firmware.mk
  193. +1 −1 br-e10-next/package/linux-fusion/linux-fusion.mk
  194. +22 −0 br-e10-next/package/lite/lite-pkg-config.patch
  195. +0 −1 br-e10-next/package/lite/lite.mk
  196. +7 −0 br-e10-next/package/lpc3250loader/Config.in.host
  197. +9 −0 br-e10-next/package/lpc3250loader/lpc3250loader.mk
  198. +0 −128 br-e10-next/package/ltrace/ltrace-0.5.3-configure-fixes.patch
  199. +0 −20 br-e10-next/package/ltrace/ltrace-0.5.3-susv3-legacy.patch
  200. +67 −0 br-e10-next/package/ltrace/ltrace-0.6.0-fix-type-punning-in-ARM-arch_-dis-en-able_breakpoint.patch
  201. +5 −35 br-e10-next/package/ltrace/ltrace.mk
  202. +2 −0 br-e10-next/package/lttng-libust/Config.in
  203. 0 ...tch → br-e10-next/package/lttng-libust/lttng-libust-dont-build-cxx-tests-when-not-available.patch
  204. +2 −0 br-e10-next/package/lttng-tools/Config.in
  205. +2 −1 br-e10-next/package/lua/lua.mk
  206. +0 −1 br-e10-next/package/lzma/lzma.mk
  207. +2 −2 br-e10-next/package/makedevs/makedevs.c
  208. +0 −5 br-e10-next/package/mdadm/mdadm.mk
  209. +20 −7 br-e10-next/package/microperl/Config.in
  210. +22 −0 br-e10-next/package/microperl/microperl-no-signal-handlers.patch
  211. +47 −0 br-e10-next/package/microperl/microperl-uudmap.patch
  212. +141 −111 br-e10-next/package/microperl/microperl.mk
  213. +0 −2 br-e10-next/package/midori/midori.mk
  214. +14 −0 br-e10-next/package/minicom/Config.in
  215. +18 −0 br-e10-next/package/minicom/minicom.mk
  216. +0 −367 br-e10-next/package/mpfr/mpfr-3.0.1_p4.patch
  217. +673 −0 br-e10-next/package/mpfr/mpfr-3.1.0-p6.patch
  218. +1 −1 br-e10-next/package/mpfr/mpfr.mk
  219. +4 −0 br-e10-next/package/mtd/mtd.mk
  220. 0 ...-avr32-bad-inline.patch → br-e10-next/package/multimedia/alsa-lib/alsa-lib-avr32-bad-inline.patch
  221. +9 −4 br-e10-next/package/multimedia/alsa-lib/alsa-lib.mk
  222. +0 −33 br-e10-next/package/multimedia/alsa-utils/alsa-utils-exp10-workaround.patch
  223. +2 −1 br-e10-next/package/multimedia/alsa-utils/alsa-utils.mk
  224. +1 −1 br-e10-next/package/multimedia/ffmpeg/ffmpeg.mk
  225. +18 −6 br-e10-next/package/multimedia/gst-plugins-bad/Config.in
  226. +37 −19 br-e10-next/package/multimedia/gst-plugins-bad/gst-plugins-bad.mk
  227. +0 −26 ...t/package/multimedia/gst-plugins-base/gst-plugins-base-0.10.35-disable-testchannels-example.patch
  228. 0 ...0.35-tremor.patch → br-e10-next/package/multimedia/gst-plugins-base/gst-plugins-base-tremor.patch
  229. +7 −1 br-e10-next/package/multimedia/gst-plugins-base/gst-plugins-base.mk
  230. +2 −3 br-e10-next/package/multimedia/gst-plugins-good/gst-plugins-good.mk
  231. +1 −1 br-e10-next/package/multimedia/gst-plugins-ugly/gst-plugins-ugly.mk
  232. +1 −1 br-e10-next/package/multimedia/gstreamer/gstreamer.mk
  233. +0 −1 br-e10-next/package/multimedia/libcdaudio/libcdaudio.mk
  234. +0 −1 br-e10-next/package/multimedia/libdvdnav/libdvdnav.mk
  235. +0 −1 br-e10-next/package/multimedia/libdvdread/libdvdread.mk
  236. +0 −1 br-e10-next/package/multimedia/live555/live555.mk
  237. +1 −1 br-e10-next/package/multimedia/mpd/S95mpd
  238. +2 −3 br-e10-next/package/multimedia/mpd/mpd.mk
  239. +1 −1 br-e10-next/package/multimedia/pulseaudio/pulseaudio.mk
  240. +0 −2 br-e10-next/package/multimedia/speex/speex.mk
  241. 0 ...-ac_cache_check.patch → br-e10-next/package/mysql_client/mysql_client-5.1.61-ac_cache_check.patch
  242. 0 ...check.patch → br-e10-next/package/mysql_client/mysql_client-5.1.61-configure-ps-cache-check.patch
  243. 0 ...e-iface.patch → br-e10-next/package/mysql_client/mysql_client-5.1.61-use-new-readline-iface.patch
  244. +1 −2 br-e10-next/package/mysql_client/mysql_client.mk
  245. +0 −37 br-e10-next/package/nbd/nbd-fix-non-lfs.patch
  246. +0 −11 br-e10-next/package/nbd/nbd-server-susv3-legacy.patch
  247. +8 −2 br-e10-next/package/nbd/nbd.mk
  248. +10 −10 br-e10-next/package/neon/Config.in
  249. +0 −3 br-e10-next/package/netcat/netcat.mk
  250. +1 −1 br-e10-next/package/netkitbase/netkitbase.mk
  251. +1 −1 br-e10-next/package/netkittelnet/netkittelnet.mk
  252. +3 −3 br-e10-next/package/netplug/S29netplug
  253. +9 −0 br-e10-next/package/netsnmp/Config.in
  254. +5 −1 br-e10-next/package/netsnmp/netsnmp.mk
  255. +0 −1 br-e10-next/package/network-manager/Config.in
  256. +1 −1 br-e10-next/package/newt/newt.mk
  257. +0 −1 br-e10-next/package/ngrep/ngrep.mk
  258. +1 −1 br-e10-next/package/ntfs-3g/ntfs-3g.mk
  259. +0 −12 br-e10-next/package/ntfsprogs/Config.in
  260. +0 −42 br-e10-next/package/ntfsprogs/ntfsprogs-2.0.0-no-pkgconfig-path-override.patch
  261. +0 −26 br-e10-next/package/ntfsprogs/ntfsprogs.mk
  262. +1 −1 br-e10-next/package/openssh/S50sshd
  263. +1 −1 br-e10-next/package/openssl/openssl.mk
  264. +475 −0 br-e10-next/package/pango/pango-no-const-return.patch
  265. +0 −1 br-e10-next/package/pango/pango.mk
  266. +15 −0 br-e10-next/package/parted/Config.in
  267. +13 −0 br-e10-next/package/parted/parted.mk
  268. +0 −5 br-e10-next/package/pcmanfm/pcmanfm.mk
  269. +1 −1 br-e10-next/package/pcre/pcre.mk
  270. +8 −3 br-e10-next/package/pixman/pixman.mk
  271. +1 −1 br-e10-next/package/poco/poco.mk
  272. +28 −0 br-e10-next/package/polarssl/Config.in
  273. +26 −0 br-e10-next/package/polarssl/polarssl-no-programs.patch
  274. +26 −0 br-e10-next/package/polarssl/polarssl-no-test-suite.patch
  275. +52 −0 br-e10-next/package/polarssl/polarssl-shared-and-static-library.patch
  276. +13 −0 br-e10-next/package/polarssl/polarssl.mk
  277. +11 −0 br-e10-next/package/protobuf/Config.in
  278. +21 −0 br-e10-next/package/protobuf/protobuf.mk
  279. +7 −31 br-e10-next/package/psmisc/psmisc-link-against-libintl.patch
  280. +7 −2 br-e10-next/package/psmisc/psmisc.mk
  281. +3 −2 br-e10-next/package/qt/Config.in
  282. +10 −6 br-e10-next/package/qt/qt-configure.patch
  283. +15 −9 br-e10-next/package/qt/qt-pthread_getattr_np.patch
  284. +41 −0 br-e10-next/package/qt/qt-uClibc-lfs-fix.patch
  285. +1 −1 br-e10-next/package/qt/qt.mk
  286. +2 −2 br-e10-next/package/radvd/radvd.mk
  287. +0 −3 br-e10-next/package/readline/readline.mk
  288. +1 −2 br-e10-next/package/rpm/rpm.mk
  289. +1 −1 br-e10-next/package/rsyslog/S01rsyslog
  290. +3 −3 br-e10-next/package/sam-ba/sam-ba.mk
  291. +1 −5 br-e10-next/package/samba/samba.mk
  292. +1 −1 br-e10-next/package/sawman/sawman.mk
  293. +2 −2 br-e10-next/package/screen/screen.mk
  294. +0 −3 br-e10-next/package/sdl_gfx/sdl_gfx.mk
  295. +0 −1 br-e10-next/package/sdl_image/sdl_image.mk
  296. +0 −1 br-e10-next/package/sdl_sound/sdl_sound.mk
  297. +1 −1 br-e10-next/package/smartmontools/smartmontools.mk
  298. +8 −0 br-e10-next/package/socketcand/Config.in
  299. +25 −0 br-e10-next/package/socketcand/socketcand-replace-cp-by-install.patch
  300. +11 −0 br-e10-next/package/socketcand/socketcand.mk
Sorry, we could not display the entire diff because too many files (855) changed.
View
38 br-e10-next/CHANGES
@@ -1,5 +1,43 @@
2012.05, Not released yet:
+ Fixes all over the tree and new features.
+
+ Use /etc/os-release for version info rather than
+ /etc/br-version.
+
+ CMake toolchain file moved to $HOST_DIR/usr/share/buildroot.
+
+ Defconfigs: mx53qsb, use 3.2.x for atngw100,
+
+ Atom processor support.
+
+ Toolchain: Add GCC 4.4.7, 4.6.3. 64bit fixes for external
+ toolchains, linaro ext toolchains, new sourcery codebench ext
+ toolchains.
+
+ Updated/fixed packages: alsa-lib, alsa-utils, atk, avahi,
+ barebox, bluez_utils, can-utils, ccache, dhcp, dnsmasq,
+ e2fsprogs, expat, feh, file, freetype, gamin, gmp, gpsd, grep,
+ gstreamer, gst-plugins-{bad,base,good,ugly}, hdparm,
+ imagemagick, kmod, libarchive, libcurl, libethumb, libffi,
+ libfuse, libglib2, libnl, libsoup, libxml2, libxslt,
+ linux-firmware, lite, lua, microperl, mpd, mpfr, mtd, nbd,
+ network-manager, ntfs-3g, openssl, pixman, qt, radvd, sdl_net,
+ smartmontools, squashfs3, squid, sysstat, tiff, usbutils,
+ util-linux, vala, wipe, xdriver_xf86-video-fbdev, zlib,
+
+ New packages: glib-networking, lcdprog, minicom, parted,
+ protobuf, zeromq
+
+ Deprecated packages: ttcp
+
+ Removed packages: ntfsprogs
+
+ Issues resolved (http://bugs.uclibc.org):
+
+ #4880: New package lcdproc
+ #4886: New package protobuf
+
2012.02, Released February 29th, 2012:
Updated/fixed packages: libecore
View
40 br-e10-next/Config.in
@@ -191,6 +191,13 @@ config BR2_CCACHE
up future builds. The cache is stored in
$HOME/.buildroot-ccache.
+ Note that Buildroot does not try to invalidate the cache
+ contents when the compiler changes in an incompatible
+ way. Therefore, if you make a change to the compiler version
+ and/or configuration, you are responsible for purging the
+ ccache cache by removing the $HOME/.buildroot-ccache
+ directory.
+
config BR2_DEPRECATED
bool "Show packages that are deprecated or obsolete"
help
@@ -198,10 +205,13 @@ config BR2_DEPRECATED
config BR2_ENABLE_DEBUG
bool "build packages with debugging symbols"
- select BR2_PACKAGE_GDB_SERVER
help
- Build packages with debugging symbols
- enabled
+ Build packages with debugging symbols enabled. All libraries
+ and binaries in the 'staging' directory will have debugging
+ symbols, which allows remote debugging even if libraries and
+ binaries are stripped on the target. Whether libraries and
+ binaries are stripped on the target is controlled by the
+ BR2_STRIP_* options below.
if BR2_ENABLE_DEBUG
choice
@@ -234,32 +244,36 @@ endchoice
endif
choice
- prompt "strip"
+ prompt "strip command for binaries on target"
default BR2_STRIP_strip
- help
- Select whether to strip binaries and libraries for the target
- or not.
- strip is the normal strip command
- sstrip is a strip that discards more than the normal strip
- none do not strip (only for debugging!)
config BR2_STRIP_strip
bool "strip"
depends on !BR2_ELF2FLT
help
- strip is the normal strip command
+ Binaries and libraries in the target filesystem will be
+ stripped using the normal 'strip' command. This allows to
+ save space, mainly by removing debugging symbols. Debugging
+ symbols on the target are needed for native debugging, but
+ not when remote debugging is used.
config BR2_STRIP_sstrip
bool "sstrip"
select BR2_PACKAGE_SSTRIP_HOST
depends on !BR2_ELF2FLT
help
- sstrip is a strip that discards more than the normal strip
+ Binaries and libraries in the target filesystem will be
+ stripped using the 'sstrip' command, which strips a little
+ bit more than the traditional 'strip' command. This allows to
+ save space, mainly by removing debugging symbols. Debugging
+ symbols on the target are needed for native debugging, but
+ not when remote debugging is used.
config BR2_STRIP_none
bool "none"
help
- none do not strip (only for debugging!)
+ Do not strip binaries and libraries in the target
+ filesystem.
endchoice
choice
View
7 br-e10-next/Makefile
@@ -48,7 +48,7 @@ export BR2_VERSION_FULL:=$(BR2_VERSION)$(shell $(TOPDIR)/support/scripts/setloca
noconfig_targets:=menuconfig nconfig gconfig xconfig config oldconfig randconfig \
defconfig %_defconfig savedefconfig allyesconfig allnoconfig silentoldconfig release \
randpackageconfig allyespackageconfig allnopackageconfig \
- source-check
+ source-check print-version
# Strip quotes and then whitespaces
qstrip=$(strip $(subst ",,$(1)))
@@ -654,6 +654,8 @@ help:
@echo
@echo 'Build:'
@echo ' all - make world'
+ @echo ' <package>-rebuild - force recompile <package>'
+ @echo ' <package>-reconfigure - force reconfigure <package>'
@echo
@echo 'Configuration:'
@echo ' menuconfig - interactive curses-based configurator'
@@ -721,6 +723,9 @@ release:
bzip2 -9 -c < $(OUT).tar > $(OUT).tar.bz2
rm -rf $(OUT) $(OUT).tar
+print-version:
+ @echo $(BR2_VERSION_FULL)
+
################################################################################
# GENDOC -- generates the make targets needed to build a specific type of
# asciidoc documentation.
View
247 br-e10-next/board/avnet/s6lx9_microboard/lx9_mmu.dts
@@ -0,0 +1,247 @@
+/*
+ * Device Tree Generator version: 1.3
+ *
+ * (C) Copyright 2007-2008 Xilinx, Inc.
+ * (C) Copyright 2007-2009 Michal Simek
+ *
+ * Michal SIMEK <monstr@monstr.eu>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * CAUTION: This file is automatically generated by libgen.
+ * Version: Xilinx EDK 13.2 EDK_O.61xd
+ *
+ * XPS project directory: device-tree_bsp_230-orig
+ */
+
+/dts-v1/;
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "xlnx,microblaze";
+ model = "testing";
+ MCB3_LPDDR: memory@80000000 {
+ device_type = "memory";
+ reg = < 0x80000000 0x4000000 >;
+ } ;
+ aliases {
+ ethernet0 = &Ethernet_MAC;
+ serial0 = &USB_Uart;
+ } ;
+ chosen {
+ bootargs = "console=ttyUL0";
+ linux,stdout-path = "/axi@0/serial@40600000";
+ } ;
+ cpus {
+ #address-cells = <1>;
+ #cpus = <0x1>;
+ #size-cells = <0>;
+ microblaze_0: cpu@0 {
+ clock-frequency = <66666667>;
+ compatible = "xlnx,microblaze-8.20.a";
+ d-cache-baseaddr = <0x80000000>;
+ d-cache-highaddr = <0x83ffffff>;
+ d-cache-line-size = <0x10>;
+ d-cache-size = <0x2000>;
+ device_type = "cpu";
+ i-cache-baseaddr = <0x80000000>;
+ i-cache-highaddr = <0x83ffffff>;
+ i-cache-line-size = <0x10>;
+ i-cache-size = <0x2000>;
+ model = "microblaze,8.20.a";
+ reg = <0>;
+ timebase-frequency = <66666667>;
+ xlnx,addr-tag-bits = <0xd>;
+ xlnx,allow-dcache-wr = <0x1>;
+ xlnx,allow-icache-wr = <0x1>;
+ xlnx,area-optimized = <0x0>;
+ xlnx,avoid-primitives = <0x0>;
+ xlnx,branch-target-cache-size = <0x0>;
+ xlnx,cache-byte-size = <0x2000>;
+ xlnx,d-axi = <0x1>;
+ xlnx,d-lmb = <0x1>;
+ xlnx,d-plb = <0x0>;
+ xlnx,data-size = <0x20>;
+ xlnx,dcache-addr-tag = <0xd>;
+ xlnx,dcache-always-used = <0x1>;
+ xlnx,dcache-byte-size = <0x2000>;
+ xlnx,dcache-data-width = <0x0>;
+ xlnx,dcache-force-tag-lutram = <0x0>;
+ xlnx,dcache-interface = <0x0>;
+ xlnx,dcache-line-len = <0x4>;
+ xlnx,dcache-use-fsl = <0x0>;
+ xlnx,dcache-use-writeback = <0x0>;
+ xlnx,dcache-victims = <0x0>;
+ xlnx,debug-enabled = <0x1>;
+ xlnx,div-zero-exception = <0x0>;
+ xlnx,dynamic-bus-sizing = <0x1>;
+ xlnx,ecc-use-ce-exception = <0x0>;
+ xlnx,edge-is-positive = <0x1>;
+ xlnx,endianness = <0x1>;
+ xlnx,family = "spartan6";
+ xlnx,fault-tolerant = <0x0>;
+ xlnx,fpu-exception = <0x0>;
+ xlnx,freq = <0x3f940ab>;
+ xlnx,fsl-data-size = <0x20>;
+ xlnx,fsl-exception = <0x0>;
+ xlnx,fsl-links = <0x0>;
+ xlnx,i-axi = <0x0>;
+ xlnx,i-lmb = <0x1>;
+ xlnx,i-plb = <0x0>;
+ xlnx,icache-always-used = <0x1>;
+ xlnx,icache-data-width = <0x0>;
+ xlnx,icache-force-tag-lutram = <0x0>;
+ xlnx,icache-interface = <0x0>;
+ xlnx,icache-line-len = <0x4>;
+ xlnx,icache-streams = <0x0>;
+ xlnx,icache-use-fsl = <0x0>;
+ xlnx,icache-victims = <0x0>;
+ xlnx,ill-opcode-exception = <0x0>;
+ xlnx,instance = "microblaze_0";
+ xlnx,interconnect = <0x2>;
+ xlnx,interconnect-m-axi-dc-aw-register = <0x0>;
+ xlnx,interconnect-m-axi-dc-read-issuing = <0x2>;
+ xlnx,interconnect-m-axi-dc-w-register = <0x0>;
+ xlnx,interconnect-m-axi-dc-write-issuing = <0x20>;
+ xlnx,interconnect-m-axi-dp-read-issuing = <0x1>;
+ xlnx,interconnect-m-axi-dp-write-issuing = <0x1>;
+ xlnx,interconnect-m-axi-ic-read-issuing = <0x2>;
+ xlnx,interconnect-m-axi-ip-read-issuing = <0x1>;
+ xlnx,interrupt-is-edge = <0x0>;
+ xlnx,lockstep-slave = <0x0>;
+ xlnx,mmu-dtlb-size = <0x1>;
+ xlnx,mmu-itlb-size = <0x1>;
+ xlnx,mmu-privileged-instr = <0x0>;
+ xlnx,mmu-tlb-access = <0x3>;
+ xlnx,mmu-zones = <0x2>;
+ xlnx,number-of-pc-brk = <0x1>;
+ xlnx,number-of-rd-addr-brk = <0x0>;
+ xlnx,number-of-wr-addr-brk = <0x0>;
+ xlnx,opcode-0x0-illegal = <0x0>;
+ xlnx,optimization = <0x0>;
+ xlnx,pvr = <0x0>;
+ xlnx,pvr-user1 = <0x0>;
+ xlnx,pvr-user2 = <0x0>;
+ xlnx,reset-msr = <0x0>;
+ xlnx,sco = <0x0>;
+ xlnx,stream-interconnect = <0x0>;
+ xlnx,unaligned-exceptions = <0x0>;
+ xlnx,use-barrel = <0x1>;
+ xlnx,use-branch-target-cache = <0x0>;
+ xlnx,use-dcache = <0x1>;
+ xlnx,use-div = <0x0>;
+ xlnx,use-ext-brk = <0x1>;
+ xlnx,use-ext-nm-brk = <0x1>;
+ xlnx,use-extended-fsl-instr = <0x0>;
+ xlnx,use-fpu = <0x0>;
+ xlnx,use-hw-mul = <0x1>;
+ xlnx,use-icache = <0x1>;
+ xlnx,use-interrupt = <0x1>;
+ xlnx,use-mmu = <0x3>;
+ xlnx,use-msr-instr = <0x1>;
+ xlnx,use-pcmp-instr = <0x0>;
+ xlnx,use-stack-protection = <0x0>;
+ } ;
+ } ;
+ axi4lite_0: axi@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "xlnx,axi-interconnect-1.03.a", "simple-bus";
+ ranges ;
+ Ethernet_MAC: ethernet@40e00000 {
+ compatible = "xlnx,axi-ethernetlite-1.00.a", "xlnx,xps-ethernetlite-1.00.a";
+ device_type = "network";
+ interrupt-parent = <&microblaze_0_intc>;
+ interrupts = < 2 0 >;
+ local-mac-address = [ 00 0a 35 aa de 00 ];
+// phy-handle = <&phy0>;
+ reg = < 0x40e00000 0x10000 >;
+ xlnx,duplex = <0x1>;
+ xlnx,family = "spartan6";
+ xlnx,include-global-buffers = <0x0>;
+ xlnx,include-internal-loopback = <0x0>;
+ xlnx,include-mdio = <0x1>;
+ xlnx,include-phy-constraints = <0x1>;
+ xlnx,interconnect-s-axi-read-acceptance = <0x1>;
+ xlnx,interconnect-s-axi-write-acceptance = <0x1>;
+ xlnx,rx-ping-pong = <0x0>;
+ xlnx,s-axi-aclk-period-ps = <0x3a98>;
+ xlnx,s-axi-id-width = <0x1>;
+ xlnx,s-axi-supports-narrow-burst = <0x0>;
+ xlnx,tx-ping-pong = <0x0>;
+/*
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy0: phy@7 {
+ compatible = "marvell,88e1111";
+ device_type = "ethernet-phy";
+ reg = <7>;
+ } ;
+ } ;
+*/
+ } ;
+ SPI_FLASH: spi@40a00000 {
+ compatible = "xlnx,axi-spi-1.01.a", "xlnx,xps-spi-2.00.a";
+ interrupt-parent = <&microblaze_0_intc>;
+ interrupts = < 1 2 >;
+ reg = < 0x40a00000 0x10000 >;
+ xlnx,family = "spartan6";
+ xlnx,fifo-exist = <0x1>;
+ xlnx,num-ss-bits = <0x1>;
+ xlnx,num-transfer-bits = <0x8>;
+ xlnx,sck-ratio = <0x4>;
+ } ;
+ USB_Uart: serial@40600000 {
+ clock-frequency = <66666667>;
+ compatible = "xlnx,axi-uartlite-1.02.a", "xlnx,xps-uartlite-1.00.a";
+ current-speed = <115200>;
+ device_type = "serial";
+ interrupt-parent = <&microblaze_0_intc>;
+ interrupts = < 3 0 >;
+ port-number = <0>;
+ reg = < 0x40600000 0x10000 >;
+ xlnx,baudrate = <0x1c200>;
+ xlnx,data-bits = <0x8>;
+ xlnx,family = "spartan6";
+ xlnx,odd-parity = <0x1>;
+ xlnx,s-axi-aclk-freq-hz = <0x3f940ab>;
+ xlnx,use-parity = <0x0>;
+ } ;
+ microblaze_0_intc: interrupt-controller@41200000 {
+ #interrupt-cells = <0x2>;
+ compatible = "xlnx,axi-intc-1.01.a", "xlnx,xps-intc-1.00.a";
+ interrupt-controller ;
+ reg = < 0x41200000 0x10000 >;
+ xlnx,kind-of-intr = <0xc>;
+ xlnx,num-intr-inputs = <0x4>;
+ } ;
+ system_timer: timer@41c00000 {
+ clock-frequency = <66666667>;
+ compatible = "xlnx,axi-timer-1.02.a", "xlnx,xps-timer-1.00.a";
+ interrupt-parent = <&microblaze_0_intc>;
+ interrupts = < 0 2 >;
+ reg = < 0x41c00000 0x10000 >;
+ xlnx,count-width = <0x20>;
+ xlnx,family = "spartan6";
+ xlnx,gen0-assert = <0x1>;
+ xlnx,gen1-assert = <0x1>;
+ xlnx,one-timer-only = <0x0>;
+ xlnx,trig0-assert = <0x1>;
+ xlnx,trig1-assert = <0x1>;
+ } ;
+ } ;
+} ;
View
68 br-e10-next/board/avnet/s6lx9_microboard/lx9_mmu_defconfig
@@ -0,0 +1,68 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="rootfs.cpio"
+CONFIG_INITRAMFS_COMPRESSION_GZIP=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EXPERT=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_HOTPLUG is not set
+# CONFIG_BASE_FULL is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_SHMEM is not set
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_OPT_LIB_ASM is not set
+CONFIG_KERNEL_BASE_ADDR=0x80000000
+CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan6"
+CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
+# CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR is not set
+CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
+CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1
+CONFIG_XILINX_MICROBLAZE0_HW_VER="8.20.a"
+CONFIG_HZ_100=y
+CONFIG_MMU=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_FORCE=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_XILINX_EMACLITE=y
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+# CONFIG_DNOTIFY is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_CIFS=y
+CONFIG_CIFS_STATS=y
+CONFIG_CIFS_STATS2=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEBUG_SLAB=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_INFO=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
View
70 br-e10-next/board/avnet/s6lx9_microboard/readme.txt
@@ -0,0 +1,70 @@
+This is the buildroot board support for the Avnet Spartan6 LX9 MicroBoard.
+
+The Avnet S6LX9 Microboard is a small USB-Stick sized module containing
+a Spartan6 FPGA capable of running the Microblaze softcore processor
+together with RAM and FLASH memory.
+
+The board can be bought from Avnet (avnet.com) or from Trenz Electronic
+(www.trenz-electronic.de) for a low price.
+
+To run the Linux built with buildroot you have to install the FPGA bitfile
+and u-boot as described in the tutorial AvtS6LX9MicroBoard_SW302_PetaLinux
+available on http://www.em.avnet.com/s6microboard
+
+On this site also is a forum containing information on how to build your own
+Microblaze processor for the Microboard.
+
+The image file (default name is simpleImage.lx9_mmu.ub) has to be copied
+to your tftp folder (often /tftpboot/) or can be programmed into the
+board's SPI flash.
+
+Sample session:
+
+$ make s6lx9_microboard_defconfig
+$ make
+$ cp build/linux-<version>/arch/microblaze/boot/simpleImage.lx9_mmu.ub /tftpboot/br12.2a.ub
+$ minicom
+<hit the reset button on the S6LX9 Microboard>
+
+ Icache:ON
+ Dcache:ON
+ U-Boot Start:0x83f00000
+SF: Got idcode 20 ba 18 10 01
+*** Warning - bad CRC, using default environment
+
+Net: Xilinx_Emaclite
+MAC: 00:0a:35:00:63:37
+U-BOOT for Avnet-LX9-Microboard-AXI-tiny-13.1
+
+BOOTP broadcast 1
+DHCP client bound to address 192.168.11.122
+Hit any key to stop autoboot: 0
+U-Boot-PetaLinux> tftp br12.2a.ub
+Using Xilinx_Emaclite device
+TFTP from server 192.168.11.10; our IP address is 192.168.11.122
+Filename 'br12.2a.ub'.
+Load address: 0x80002000
+Loading: #################################################################
+ #################################################################
+ #################################################################
+ #################################################################
+ #################################################################
+ ##############################
+done
+Bytes transferred = 5207724 (4f76ac hex)
+U-Boot-PetaLinux> bootm
+## Booting kernel from Legacy Image at 80002000 ...
+ Image Name: Linux-3.1.0
+ Image Type: MicroBlaze Linux Kernel Image (uncompressed)
+ Data Size: 5207660 Bytes = 5 MB
+ Load Address: 80000000
+ Entry Point: 80000000
+ Verifying Checksum ... OK
+ Loading Kernel Image ... OK
+OK
+## Transferring control to Linux (at address 80000000), 0x80000000 ramdisk 0x00000000, FDT 0x00000000...
+Early console on uartlite at 0x40600000
+..... boot log skipped
+
+Welcome to Microblaze Buildroot
+Microblaze login:
View
0 ...board/qemu/arm-versatile/linux-3.2.config → ...board/qemu/arm-versatile/linux-3.3.config
File renamed without changes.
View
68 br-e10-next/board/qemu/microblazebe-mmu/kernel-3.3.config
@@ -0,0 +1,68 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="rootfs.cpio"
+CONFIG_INITRAMFS_COMPRESSION_GZIP=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EXPERT=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_HOTPLUG is not set
+# CONFIG_BASE_FULL is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_SHMEM is not set
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_OPT_LIB_ASM=y
+CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan3adsp"
+CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
+CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1
+CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
+CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1
+CONFIG_HZ_100=y
+CONFIG_MMU=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_FORCE=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_XILINX_EMACLITE=y
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+# CONFIG_DNOTIFY is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_CIFS=y
+CONFIG_CIFS_STATS=y
+CONFIG_CIFS_STATS2=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEBUG_SLAB=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_EARLY_PRINTK=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
View
6 br-e10-next/board/qemu/microblazebe-mmu/readme.txt
@@ -0,0 +1,6 @@
+Run the emulation with:
+
+ qemu-system-microblaze -M petalogix-s3adsp1800 -kernel output/images/linux.bin -serial stdio
+
+The login prompt will appear in the terminal that started Qemu.
+
View
367 br-e10-next/board/qemu/microblazebe-mmu/system.dts
@@ -0,0 +1,367 @@
+/*
+ * Device Tree Generator version: 1.1
+ *
+ * (C) Copyright 2007-2008 Xilinx, Inc.
+ * (C) Copyright 2007-2009 Michal Simek
+ *
+ * Michal SIMEK <monstr@monstr.eu>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * CAUTION: This file is automatically generated by libgen.
+ * Version: Xilinx EDK 10.1.03 EDK_K_SP3.6
+ *
+ * XPS project directory: Xilinx-ML505-ll_temac-sgdma-MMU-FDT-edk101
+ */
+
+/dts-v1/;
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "xlnx,microblaze";
+ hard-reset-gpios = <&LEDs_8Bit 2 1>;
+ model = "testing";
+ DDR2_SDRAM: memory@90000000 {
+ device_type = "memory";
+ reg = < 0x90000000 0x10000000 >;
+ } ;
+ aliases {
+ ethernet0 = &Hard_Ethernet_MAC;
+ serial0 = &RS232_Uart_1;
+ } ;
+ chosen {
+ bootargs = "console=ttyUL0,115200 highres=on";
+ linux,stdout-path = "/plb@0/serial@84000000";
+ } ;
+ cpus {
+ #address-cells = <1>;
+ #cpus = <0x1>;
+ #size-cells = <0>;
+ microblaze_0: cpu@0 {
+ clock-frequency = <125000000>;
+ compatible = "xlnx,microblaze-7.10.d";
+ d-cache-baseaddr = <0x90000000>;
+ d-cache-highaddr = <0x9fffffff>;
+ d-cache-line-size = <0x10>;
+ d-cache-size = <0x2000>;
+ device_type = "cpu";
+ i-cache-baseaddr = <0x90000000>;
+ i-cache-highaddr = <0x9fffffff>;
+ i-cache-line-size = <0x10>;
+ i-cache-size = <0x2000>;
+ model = "microblaze,7.10.d";
+ reg = <0>;
+ timebase-frequency = <125000000>;
+ xlnx,addr-tag-bits = <0xf>;
+ xlnx,allow-dcache-wr = <0x1>;
+ xlnx,allow-icache-wr = <0x1>;
+ xlnx,area-optimized = <0x0>;
+ xlnx,cache-byte-size = <0x2000>;
+ xlnx,d-lmb = <0x1>;
+ xlnx,d-opb = <0x0>;
+ xlnx,d-plb = <0x1>;
+ xlnx,data-size = <0x20>;
+ xlnx,dcache-addr-tag = <0xf>;
+ xlnx,dcache-always-used = <0x1>;
+ xlnx,dcache-byte-size = <0x2000>;
+ xlnx,dcache-line-len = <0x4>;
+ xlnx,dcache-use-fsl = <0x1>;
+ xlnx,debug-enabled = <0x1>;
+ xlnx,div-zero-exception = <0x1>;
+ xlnx,dopb-bus-exception = <0x0>;
+ xlnx,dynamic-bus-sizing = <0x1>;
+ xlnx,edge-is-positive = <0x1>;
+ xlnx,family = "virtex5";
+ xlnx,endianness = <0x1>;
+ xlnx,fpu-exception = <0x1>;
+ xlnx,fsl-data-size = <0x20>;
+ xlnx,fsl-exception = <0x0>;
+ xlnx,fsl-links = <0x0>;
+ xlnx,i-lmb = <0x1>;
+ xlnx,i-opb = <0x0>;
+ xlnx,i-plb = <0x1>;
+ xlnx,icache-always-used = <0x1>;
+ xlnx,icache-line-len = <0x4>;
+ xlnx,icache-use-fsl = <0x1>;
+ xlnx,ill-opcode-exception = <0x1>;
+ xlnx,instance = "microblaze_0";
+ xlnx,interconnect = <0x1>;
+ xlnx,interrupt-is-edge = <0x0>;
+ xlnx,iopb-bus-exception = <0x0>;
+ xlnx,mmu-dtlb-size = <0x4>;
+ xlnx,mmu-itlb-size = <0x2>;
+ xlnx,mmu-tlb-access = <0x3>;
+ xlnx,mmu-zones = <0x10>;
+ xlnx,number-of-pc-brk = <0x1>;
+ xlnx,number-of-rd-addr-brk = <0x0>;
+ xlnx,number-of-wr-addr-brk = <0x0>;
+ xlnx,opcode-0x0-illegal = <0x1>;
+ xlnx,pvr = <0x2>;
+ xlnx,pvr-user1 = <0x0>;
+ xlnx,pvr-user2 = <0x0>;
+ xlnx,reset-msr = <0x0>;
+ xlnx,sco = <0x0>;
+ xlnx,unaligned-exceptions = <0x1>;
+ xlnx,use-barrel = <0x1>;
+ xlnx,use-dcache = <0x1>;
+ xlnx,use-div = <0x1>;
+ xlnx,use-ext-brk = <0x1>;
+ xlnx,use-ext-nm-brk = <0x1>;
+ xlnx,use-extended-fsl-instr = <0x0>;
+ xlnx,use-fpu = <0x2>;
+ xlnx,use-hw-mul = <0x2>;
+ xlnx,use-icache = <0x1>;
+ xlnx,use-interrupt = <0x1>;
+ xlnx,use-mmu = <0x3>;
+ xlnx,use-msr-instr = <0x1>;
+ xlnx,use-pcmp-instr = <0x1>;
+ } ;
+ } ;
+ mb_plb: plb@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "xlnx,plb-v46-1.03.a", "xlnx,plb-v46-1.00.a", "simple-bus";
+ ranges ;
+ FLASH: flash@a0000000 {
+ bank-width = <2>;
+ compatible = "xlnx,xps-mch-emc-2.00.a", "cfi-flash";
+ reg = < 0xa0000000 0x2000000 >;
+ xlnx,family = "virtex5";
+ xlnx,include-datawidth-matching-0 = <0x1>;
+ xlnx,include-datawidth-matching-1 = <0x0>;
+ xlnx,include-datawidth-matching-2 = <0x0>;
+ xlnx,include-datawidth-matching-3 = <0x0>;
+ xlnx,include-negedge-ioregs = <0x0>;
+ xlnx,include-plb-ipif = <0x1>;
+ xlnx,include-wrbuf = <0x1>;
+ xlnx,max-mem-width = <0x10>;
+ xlnx,mch-native-dwidth = <0x20>;
+ xlnx,mch-plb-clk-period-ps = <0x1f40>;
+ xlnx,mch-splb-awidth = <0x20>;
+ xlnx,mch0-accessbuf-depth = <0x10>;
+ xlnx,mch0-protocol = <0x0>;
+ xlnx,mch0-rddatabuf-depth = <0x10>;
+ xlnx,mch1-accessbuf-depth = <0x10>;
+ xlnx,mch1-protocol = <0x0>;
+ xlnx,mch1-rddatabuf-depth = <0x10>;
+ xlnx,mch2-accessbuf-depth = <0x10>;
+ xlnx,mch2-protocol = <0x0>;
+ xlnx,mch2-rddatabuf-depth = <0x10>;
+ xlnx,mch3-accessbuf-depth = <0x10>;
+ xlnx,mch3-protocol = <0x0>;
+ xlnx,mch3-rddatabuf-depth = <0x10>;
+ xlnx,mem0-width = <0x10>;
+ xlnx,mem1-width = <0x20>;
+ xlnx,mem2-width = <0x20>;
+ xlnx,mem3-width = <0x20>;
+ xlnx,num-banks-mem = <0x1>;
+ xlnx,num-channels = <0x0>;
+ xlnx,priority-mode = <0x0>;
+ xlnx,synch-mem-0 = <0x0>;
+ xlnx,synch-mem-1 = <0x0>;
+ xlnx,synch-mem-2 = <0x0>;
+ xlnx,synch-mem-3 = <0x0>;
+ xlnx,synch-pipedelay-0 = <0x2>;
+ xlnx,synch-pipedelay-1 = <0x2>;
+ xlnx,synch-pipedelay-2 = <0x2>;
+ xlnx,synch-pipedelay-3 = <0x2>;
+ xlnx,tavdv-ps-mem-0 = <0x1adb0>;
+ xlnx,tavdv-ps-mem-1 = <0x3a98>;
+ xlnx,tavdv-ps-mem-2 = <0x3a98>;
+ xlnx,tavdv-ps-mem-3 = <0x3a98>;
+ xlnx,tcedv-ps-mem-0 = <0x1adb0>;
+ xlnx,tcedv-ps-mem-1 = <0x3a98>;
+ xlnx,tcedv-ps-mem-2 = <0x3a98>;
+ xlnx,tcedv-ps-mem-3 = <0x3a98>;
+ xlnx,thzce-ps-mem-0 = <0x88b8>;
+ xlnx,thzce-ps-mem-1 = <0x1b58>;
+ xlnx,thzce-ps-mem-2 = <0x1b58>;
+ xlnx,thzce-ps-mem-3 = <0x1b58>;
+ xlnx,thzoe-ps-mem-0 = <0x1b58>;
+ xlnx,thzoe-ps-mem-1 = <0x1b58>;
+ xlnx,thzoe-ps-mem-2 = <0x1b58>;
+ xlnx,thzoe-ps-mem-3 = <0x1b58>;
+ xlnx,tlzwe-ps-mem-0 = <0x88b8>;
+ xlnx,tlzwe-ps-mem-1 = <0x0>;
+ xlnx,tlzwe-ps-mem-2 = <0x0>;
+ xlnx,tlzwe-ps-mem-3 = <0x0>;
+ xlnx,twc-ps-mem-0 = <0x2af8>;
+ xlnx,twc-ps-mem-1 = <0x3a98>;
+ xlnx,twc-ps-mem-2 = <0x3a98>;
+ xlnx,twc-ps-mem-3 = <0x3a98>;
+ xlnx,twp-ps-mem-0 = <0x11170>;
+ xlnx,twp-ps-mem-1 = <0x2ee0>;
+ xlnx,twp-ps-mem-2 = <0x2ee0>;
+ xlnx,twp-ps-mem-3 = <0x2ee0>;
+ xlnx,xcl0-linesize = <0x4>;
+ xlnx,xcl0-writexfer = <0x1>;
+ xlnx,xcl1-linesize = <0x4>;
+ xlnx,xcl1-writexfer = <0x1>;
+ xlnx,xcl2-linesize = <0x4>;
+ xlnx,xcl2-writexfer = <0x1>;
+ xlnx,xcl3-linesize = <0x4>;
+ xlnx,xcl3-writexfer = <0x1>;
+ } ;
+ Hard_Ethernet_MAC: xps-ll-temac@81c00000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "xlnx,compound";
+ ranges ;
+ ethernet@81c00000 {
+ compatible = "xlnx,xps-ll-temac-1.01.b", "xlnx,xps-ll-temac-1.00.a";
+ device_type = "network";
+ interrupt-parent = <&xps_intc_0>;
+ interrupts = < 5 2 >;
+ llink-connected = <&PIM3>;
+ local-mac-address = [ 00 0a 35 00 00 00 ];
+ reg = < 0x81c00000 0x40 >;
+ xlnx,bus2core-clk-ratio = <0x1>;
+ xlnx,phy-type = <0x1>;
+ xlnx,phyaddr = <0x1>;
+ xlnx,rxcsum = <0x0>;
+ xlnx,rxfifo = <0x1000>;
+ xlnx,temac-type = <0x0>;
+ xlnx,txcsum = <0x0>;
+ xlnx,txfifo = <0x1000>;
+ } ;
+ } ;
+ IIC_EEPROM: i2c@81600000 {
+ compatible = "xlnx,xps-iic-2.00.a";
+ interrupt-parent = <&xps_intc_0>;
+ interrupts = < 6 2 >;
+ reg = < 0x81600000 0x10000 >;
+ xlnx,clk-freq = <0x7735940>;
+ xlnx,family = "virtex5";
+ xlnx,gpo-width = <0x1>;
+ xlnx,iic-freq = <0x186a0>;
+ xlnx,scl-inertial-delay = <0x0>;
+ xlnx,sda-inertial-delay = <0x0>;
+ xlnx,ten-bit-adr = <0x0>;
+ } ;
+ LEDs_8Bit: gpio@81400000 {
+ compatible = "xlnx,xps-gpio-1.00.a";
+ interrupt-parent = <&xps_intc_0>;
+ interrupts = < 7 2 >;
+ reg = < 0x81400000 0x10000 >;
+ xlnx,all-inputs = <0x0>;
+ xlnx,all-inputs-2 = <0x0>;
+ xlnx,dout-default = <0x0>;
+ xlnx,dout-default-2 = <0x0>;
+ xlnx,family = "virtex5";
+ xlnx,gpio-width = <0x8>;
+ xlnx,interrupt-present = <0x1>;
+ xlnx,is-bidir = <0x1>;
+ xlnx,is-bidir-2 = <0x1>;
+ xlnx,is-dual = <0x0>;
+ xlnx,tri-default = <0xffffffff>;
+ xlnx,tri-default-2 = <0xffffffff>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ } ;
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ heartbeat {
+ label = "Heartbeat";
+ gpios = <&LEDs_8Bit 4 1>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ yellow {
+ label = "Yellow";
+ gpios = <&LEDs_8Bit 5 1>;
+ };
+
+ red {
+ label = "Red";
+ gpios = <&LEDs_8Bit 6 1>;
+ };
+
+ green {
+ label = "Green";
+ gpios = <&LEDs_8Bit 7 1>;
+ };
+ } ;
+ RS232_Uart_1: serial@84000000 {
+ clock-frequency = <125000000>;
+ compatible = "xlnx,xps-uartlite-1.00.a";
+ current-speed = <115200>;
+ device_type = "serial";
+ interrupt-parent = <&xps_intc_0>;
+ interrupts = < 8 0 >;
+ port-number = <0>;
+ reg = < 0x84000000 0x10000 >;
+ xlnx,baudrate = <0x1c200>;
+ xlnx,data-bits = <0x8>;
+ xlnx,family = "virtex5";
+ xlnx,odd-parity = <0x0>;
+ xlnx,use-parity = <0x0>;
+ } ;
+ SysACE_CompactFlash: sysace@83600000 {
+ compatible = "xlnx,xps-sysace-1.00.a";
+ interrupt-parent = <&xps_intc_0>;
+ interrupts = < 4 2 >;
+ reg = < 0x83600000 0x10000 >;
+ xlnx,family = "virtex5";
+ xlnx,mem-width = <0x10>;
+ } ;
+ debug_module: debug@84400000 {
+ compatible = "xlnx,mdm-1.00.d";
+ reg = < 0x84400000 0x10000 >;
+ xlnx,family = "virtex5";
+ xlnx,interconnect = <0x1>;
+ xlnx,jtag-chain = <0x2>;
+ xlnx,mb-dbg-ports = <0x1>;
+ xlnx,uart-width = <0x8>;
+ xlnx,use-uart = <0x1>;
+ xlnx,write-fsl-ports = <0x0>;
+ } ;
+ mpmc@90000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "xlnx,mpmc-4.02.a";
+ ranges ;
+ PIM3: sdma@84600180 {
+ compatible = "xlnx,ll-dma-1.00.a";
+ interrupt-parent = <&xps_intc_0>;
+ interrupts = < 2 2 1 2 >;
+ reg = < 0x84600180 0x80 >;
+ } ;
+ } ;
+ xps_intc_0: interrupt-controller@81800000 {
+ #interrupt-cells = <0x2>;
+ compatible = "xlnx,xps-intc-1.00.a";
+ interrupt-controller ;
+ reg = < 0x81800000 0x10000 >;
+ xlnx,kind-of-intr = <0x100>;
+ xlnx,num-intr-inputs = <0x9>;
+ } ;
+ xps_timer_1: timer@83c00000 {
+ compatible = "xlnx,xps-timer-1.00.a";
+ interrupt-parent = <&xps_intc_0>;
+ interrupts = < 3 2 >;
+ reg = < 0x83c00000 0x10000 >;
+ xlnx,count-width = <0x20>;
+ xlnx,family = "virtex5";
+ xlnx,gen0-assert = <0x1>;
+ xlnx,gen1-assert = <0x1>;
+ xlnx,one-timer-only = <0x0>;
+ xlnx,trig0-assert = <0x1>;
+ xlnx,trig1-assert = <0x1>;
+ } ;
+ } ;
+} ;
View
67 br-e10-next/board/qemu/microblazeel-mmu/kernel-3.3.config
@@ -0,0 +1,67 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="rootfs.cpio"
+CONFIG_INITRAMFS_COMPRESSION_GZIP=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EXPERT=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_HOTPLUG is not set
+# CONFIG_BASE_FULL is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_SHMEM is not set
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan3adsp"
+CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
+CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1
+CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
+CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1
+CONFIG_HZ_100=y
+CONFIG_MMU=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_FORCE=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_XILINX_EMACLITE=y
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+# CONFIG_DNOTIFY is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_CIFS=y
+CONFIG_CIFS_STATS=y
+CONFIG_CIFS_STATS2=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEBUG_SLAB=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_EARLY_PRINTK=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
View
6 br-e10-next/board/qemu/microblazeel-mmu/readme.txt
@@ -0,0 +1,6 @@
+Run the emulation with:
+
+ qemu-system-microblazeel -M petalogix-s3adsp1800 -kernel output/images/linux.bin -serial stdio
+
+The login prompt will appear in the terminal that started Qemu.
+
View
367 br-e10-next/board/qemu/microblazeel-mmu/system.dts
@@ -0,0 +1,367 @@
+/*
+ * Device Tree Generator version: 1.1
+ *
+ * (C) Copyright 2007-2008 Xilinx, Inc.
+ * (C) Copyright 2007-2009 Michal Simek
+ *
+ * Michal SIMEK <monstr@monstr.eu>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * CAUTION: This file is automatically generated by libgen.
+ * Version: Xilinx EDK 10.1.03 EDK_K_SP3.6
+ *
+ * XPS project directory: Xilinx-ML505-ll_temac-sgdma-MMU-FDT-edk101
+ */
+
+/dts-v1/;
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "xlnx,microblaze";
+ hard-reset-gpios = <&LEDs_8Bit 2 1>;
+ model = "testing";
+ DDR2_SDRAM: memory@90000000 {
+ device_type = "memory";
+ reg = < 0x90000000 0x10000000 >;
+ } ;
+ aliases {
+ ethernet0 = &Hard_Ethernet_MAC;
+ serial0 = &RS232_Uart_1;
+ } ;
+ chosen {
+ bootargs = "console=ttyUL0,115200 highres=on";
+ linux,stdout-path = "/plb@0/serial@84000000";
+ } ;
+ cpus {
+ #address-cells = <1>;
+ #cpus = <0x1>;
+ #size-cells = <0>;
+ microblaze_0: cpu@0 {
+ clock-frequency = <125000000>;
+ compatible = "xlnx,microblaze-7.10.d";
+ d-cache-baseaddr = <0x90000000>;
+ d-cache-highaddr = <0x9fffffff>;
+ d-cache-line-size = <0x10>;
+ d-cache-size = <0x2000>;
+ device_type = "cpu";
+ i-cache-baseaddr = <0x90000000>;
+ i-cache-highaddr = <0x9fffffff>;
+ i-cache-line-size = <0x10>;
+ i-cache-size = <0x2000>;
+ model = "microblaze,7.10.d";
+ reg = <0>;
+ timebase-frequency = <125000000>;
+ xlnx,addr-tag-bits = <0xf>;
+ xlnx,allow-dcache-wr = <0x1>;
+ xlnx,allow-icache-wr = <0x1>;
+ xlnx,area-optimized = <0x0>;
+ xlnx,cache-byte-size = <0x2000>;
+ xlnx,d-lmb = <0x1>;
+ xlnx,d-opb = <0x0>;
+ xlnx,d-plb = <0x1>;
+ xlnx,data-size = <0x20>;
+ xlnx,dcache-addr-tag = <0xf>;
+ xlnx,dcache-always-used = <0x1>;
+ xlnx,dcache-byte-size = <0x2000>;
+ xlnx,dcache-line-len = <0x4>;
+ xlnx,dcache-use-fsl = <0x1>;
+ xlnx,debug-enabled = <0x1>;
+ xlnx,div-zero-exception = <0x1>;
+ xlnx,dopb-bus-exception = <0x0>;
+ xlnx,dynamic-bus-sizing = <0x1>;
+ xlnx,edge-is-positive = <0x1>;
+ xlnx,family = "virtex5";
+ xlnx,endianness = <0x1>;
+ xlnx,fpu-exception = <0x1>;
+ xlnx,fsl-data-size = <0x20>;
+ xlnx,fsl-exception = <0x0>;
+ xlnx,fsl-links = <0x0>;
+ xlnx,i-lmb = <0x1>;
+ xlnx,i-opb = <0x0>;
+ xlnx,i-plb = <0x1>;
+ xlnx,icache-always-used = <0x1>;
+ xlnx,icache-line-len = <0x4>;
+ xlnx,icache-use-fsl = <0x1>;
+ xlnx,ill-opcode-exception = <0x1>;
+ xlnx,instance = "microblaze_0";
+ xlnx,interconnect = <0x1>;
+ xlnx,interrupt-is-edge = <0x0>;
+ xlnx,iopb-bus-exception = <0x0>;
+ xlnx,mmu-dtlb-size = <0x4>;
+ xlnx,mmu-itlb-size = <0x2>;
+ xlnx,mmu-tlb-access = <0x3>;
+ xlnx,mmu-zones = <0x10>;
+ xlnx,number-of-pc-brk = <0x1>;
+ xlnx,number-of-rd-addr-brk = <0x0>;
+ xlnx,number-of-wr-addr-brk = <0x0>;
+ xlnx,opcode-0x0-illegal = <0x1>;
+ xlnx,pvr = <0x2>;
+ xlnx,pvr-user1 = <0x0>;
+ xlnx,pvr-user2 = <0x0>;
+ xlnx,reset-msr = <0x0>;
+ xlnx,sco = <0x0>;
+ xlnx,unaligned-exceptions = <0x1>;
+ xlnx,use-barrel = <0x1>;
+ xlnx,use-dcache = <0x1>;
+ xlnx,use-div = <0x1>;
+ xlnx,use-ext-brk = <0x1>;
+ xlnx,use-ext-nm-brk = <0x1>;
+ xlnx,use-extended-fsl-instr = <0x0>;
+ xlnx,use-fpu = <0x2>;
+ xlnx,use-hw-mul = <0x2>;
+ xlnx,use-icache = <0x1>;
+ xlnx,use-interrupt = <0x1>;
+ xlnx,use-mmu = <0x3>;
+ xlnx,use-msr-instr = <0x1>;
+ xlnx,use-pcmp-instr = <0x1>;
+ } ;
+ } ;
+ mb_plb: plb@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "xlnx,plb-v46-1.03.a", "xlnx,plb-v46-1.00.a", "simple-bus";
+ ranges ;
+ FLASH: flash@a0000000 {
+ bank-width = <2>;
+ compatible = "xlnx,xps-mch-emc-2.00.a", "cfi-flash";
+ reg = < 0xa0000000 0x2000000 >;
+ xlnx,family = "virtex5";
+ xlnx,include-datawidth-matching-0 = <0x1>;
+ xlnx,include-datawidth-matching-1 = <0x0>;
+ xlnx,include-datawidth-matching-2 = <0x0>;
+ xlnx,include-datawidth-matching-3 = <0x0>;
+ xlnx,include-negedge-ioregs = <0x0>;
+ xlnx,include-plb-ipif = <0x1>;
+ xlnx,include-wrbuf = <0x1>;
+ xlnx,max-mem-width = <0x10>;
+ xlnx,mch-native-dwidth = <0x20>;
+ xlnx,mch-plb-clk-period-ps = <0x1f40>;
+ xlnx,mch-splb-awidth = <0x20>;
+ xlnx,mch0-accessbuf-depth = <0x10>;
+ xlnx,mch0-protocol = <0x0>;
+ xlnx,mch0-rddatabuf-depth = <0x10>;
+ xlnx,mch1-accessbuf-depth = <0x10>;
+ xlnx,mch1-protocol = <0x0>;
+ xlnx,mch1-rddatabuf-depth = <0x10>;
+ xlnx,mch2-accessbuf-depth = <0x10>;
+ xlnx,mch2-protocol = <0x0>;
+ xlnx,mch2-rddatabuf-depth = <0x10>;
+ xlnx,mch3-accessbuf-depth = <0x10>;
+ xlnx,mch3-protocol = <0x0>;
+ xlnx,mch3-rddatabuf-depth = <0x10>;
+ xlnx,mem0-width = <0x10>;
+ xlnx,mem1-width = <0x20>;
+ xlnx,mem2-width = <0x20>;
+ xlnx,mem3-width = <0x20>;
+ xlnx,num-banks-mem = <0x1>;
+ xlnx,num-channels = <0x0>;
+ xlnx,priority-mode = <0x0>;
+ xlnx,synch-mem-0 = <0x0>;
+ xlnx,synch-mem-1 = <0x0>;
+ xlnx,synch-mem-2 = <0x0>;
+ xlnx,synch-mem-3 = <0x0>;
+ xlnx,synch-pipedelay-0 = <0x2>;
+ xlnx,synch-pipedelay-1 = <0x2>;
+ xlnx,synch-pipedelay-2 = <0x2>;
+ xlnx,synch-pipedelay-3 = <0x2>;
+ xlnx,tavdv-ps-mem-0 = <0x1adb0>;
+ xlnx,tavdv-ps-mem-1 = <0x3a98>;
+ xlnx,tavdv-ps-mem-2 = <0x3a98>;
+ xlnx,tavdv-ps-mem-3 = <0x3a98>;
+ xlnx,tcedv-ps-mem-0 = <0x1adb0>;
+ xlnx,tcedv-ps-mem-1 = <0x3a98>;
+ xlnx,tcedv-ps-mem-2 = <0x3a98>;
+ xlnx,tcedv-ps-mem-3 = <0x3a98>;
+ xlnx,thzce-ps-mem-0 = <0x88b8>;
+ xlnx,thzce-ps-mem-1 = <0x1b58>;
+ xlnx,thzce-ps-mem-2 = <0x1b58>;
+ xlnx,thzce-ps-mem-3 = <0x1b58>;
+ xlnx,thzoe-ps-mem-0 = <0x1b58>;
+ xlnx,thzoe-ps-mem-1 = <0x1b58>;
+ xlnx,thzoe-ps-mem-2 = <0x1b58>;
+ xlnx,thzoe-ps-mem-3 = <0x1b58>;
+ xlnx,tlzwe-ps-mem-0 = <0x88b8>;
+ xlnx,tlzwe-ps-mem-1 = <0x0>;
+ xlnx,tlzwe-ps-mem-2 = <0x0>;
+ xlnx,tlzwe-ps-mem-3 = <0x0>;
+ xlnx,twc-ps-mem-0 = <0x2af8>;
+ xlnx,twc-ps-mem-1 = <0x3a98>;
+ xlnx,twc-ps-mem-2 = <0x3a98>;
+ xlnx,twc-ps-mem-3 = <0x3a98>;
+ xlnx,twp-ps-mem-0 = <0x11170>;
+ xlnx,twp-ps-mem-1 = <0x2ee0>;
+ xlnx,twp-ps-mem-2 = <0x2ee0>;
+ xlnx,twp-ps-mem-3 = <0x2ee0>;
+ xlnx,xcl0-linesize = <0x4>;
+ xlnx,xcl0-writexfer = <0x1>;
+ xlnx,xcl1-linesize = <0x4>;
+ xlnx,xcl1-writexfer = <0x1>;
+ xlnx,xcl2-linesize = <0x4>;
+ xlnx,xcl2-writexfer = <0x1>;
+ xlnx,xcl3-linesize = <0x4>;
+ xlnx,xcl3-writexfer = <0x1>;
+ } ;
+ Hard_Ethernet_MAC: xps-ll-temac@81c00000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "xlnx,compound";
+ ranges ;
+ ethernet@81c00000 {
+ compatible = "xlnx,xps-ll-temac-1.01.b", "xlnx,xps-ll-temac-1.00.a";
+ device_type = "network";
+ interrupt-parent = <&xps_intc_0>;
+ interrupts = < 5 2 >;
+ llink-connected = <&PIM3>;
+ local-mac-address = [ 00 0a 35 00 00 00 ];
+ reg = < 0x81c00000 0x40 >;
+ xlnx,bus2core-clk-ratio = <0x1>;
+ xlnx,phy-type = <0x1>;
+ xlnx,phyaddr = <0x1>;
+ xlnx,rxcsum = <0x0>;
+ xlnx,rxfifo = <0x1000>;
+ xlnx,temac-type = <0x0>;
+ xlnx,txcsum = <0x0>;
+ xlnx,txfifo = <0x1000>;
+ } ;
+ } ;
+ IIC_EEPROM: i2c@81600000 {
+ compatible = "xlnx,xps-iic-2.00.a";
+ interrupt-parent = <&xps_intc_0>;
+ interrupts = < 6 2 >;
+ reg = < 0x81600000 0x10000 >;
+ xlnx,clk-freq = <0x7735940>;
+ xlnx,family = "virtex5";
+ xlnx,gpo-width = <0x1>;
+ xlnx,iic-freq = <0x186a0>;
+ xlnx,scl-inertial-delay = <0x0>;
+ xlnx,sda-inertial-delay = <0x0>;
+ xlnx,ten-bit-adr = <0x0>;
+ } ;
+ LEDs_8Bit: gpio@81400000 {
+ compatible = "xlnx,xps-gpio-1.00.a";
+ interrupt-parent = <&xps_intc_0>;
+ interrupts = < 7 2 >;
+ reg = < 0x81400000 0x10000 >;
+ xlnx,all-inputs = <0x0>;
+ xlnx,all-inputs-2 = <0x0>;
+ xlnx,dout-default = <0x0>;
+ xlnx,dout-default-2 = <0x0>;
+ xlnx,family = "virtex5";
+ xlnx,gpio-width = <0x8>;
+ xlnx,interrupt-present = <0x1>;
+ xlnx,is-bidir = <0x1>;
+ xlnx,is-bidir-2 = <0x1>;
+ xlnx,is-dual = <0x0>;
+ xlnx,tri-default = <0xffffffff>;
+ xlnx,tri-default-2 = <0xffffffff>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ } ;
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ heartbeat {
+ label = "Heartbeat";
+ gpios = <&LEDs_8Bit 4 1>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ yellow {
+ label = "Yellow";
+ gpios = <&LEDs_8Bit 5 1>;
+ };
+
+ red {
+ label = "Red";
+ gpios = <&LEDs_8Bit 6 1>;
+ };
+
+ green {
+ label = "Green";
+ gpios = <&LEDs_8Bit 7 1>;
+ };
+ } ;
+ RS232_Uart_1: serial@84000000 {
+ clock-frequency = <125000000>;
+ compatible = "xlnx,xps-uartlite-1.00.a";
+ current-speed = <115200>;
+ device_type = "serial";
+ interrupt-parent = <&xps_intc_0>;
+ interrupts = < 8 0 >;
+ port-number = <0>;
+ reg = < 0x84000000 0x10000 >;
+ xlnx,baudrate = <0x1c200>;
+ xlnx,data-bits = <0x8>;
+ xlnx,family = "virtex5";
+ xlnx,odd-parity = <0x0>;
+ xlnx,use-parity = <0x0>;
+ } ;
+ SysACE_CompactFlash: sysace@83600000 {
+ compatible = "xlnx,xps-sysace-1.00.a";
+ interrupt-parent = <&xps_intc_0>;
+ interrupts = < 4 2 >;
+ reg = < 0x83600000 0x10000 >;
+ xlnx,family = "virtex5";
+ xlnx,mem-width = <0x10>;
+ } ;
+ debug_module: debug@84400000 {
+ compatible = "xlnx,mdm-1.00.d";
+ reg = < 0x84400000 0x10000 >;
+ xlnx,family = "virtex5";
+ xlnx,interconnect = <0x1>;
+ xlnx,jtag-chain = <0x2>;
+ xlnx,mb-dbg-ports = <0x1>;
+ xlnx,uart-width = <0x8>;
+ xlnx,use-uart = <0x1>;
+ xlnx,write-fsl-ports = <0x0>;
+ } ;
+ mpmc@90000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "xlnx,mpmc-4.02.a";
+ ranges ;
+ PIM3: sdma@84600180 {
+ compatible = "xlnx,ll-dma-1.00.a";
+ interrupt-parent = <&xps_intc_0>;
+ interrupts = < 2 2 1 2 >;
+ reg = < 0x84600180 0x80 >;
+ } ;
+ } ;
+ xps_intc_0: interrupt-controller@81800000 {
+ #interrupt-cells = <0x2>;
+ compatible = "xlnx,xps-intc-1.00.a";
+ interrupt-controller ;
+ reg = < 0x81800000 0x10000 >;
+ xlnx,kind-of-intr = <0x100>;
+ xlnx,num-intr-inputs = <0x9>;
+ } ;
+ xps_timer_1: timer@83c00000 {
+ compatible = "xlnx,xps-timer-1.00.a";
+ interrupt-parent = <&xps_intc_0>;
+ interrupts = < 3 2 >;
+ reg = < 0x83c00000 0x10000 >;
+ xlnx,count-width = <0x20>;
+ xlnx,family = "virtex5";
+ xlnx,gen0-assert = <0x1>;
+ xlnx,gen1-assert = <0x1>;
+ xlnx,one-timer-only = <0x0>;
+ xlnx,trig0-assert = <0x1>;
+ xlnx,trig1-assert = <0x1>;
+ } ;
+ } ;
+} ;
View
0 ...cv/board/qemu/mips-malta/linux-3.2.config → ...xt/board/qemu/mips-malta/linux-3.3.config
File renamed without changes.
View
0 .../board/qemu/mipsel-malta/linux-3.2.config → .../board/qemu/mipsel-malta/linux-3.3.config
File renamed without changes.
View
0 ...ard/qemu/powerpc-g3beige/linux-3.2.config → ...ard/qemu/powerpc-g3beige/linux-3.3.config
File renamed without changes.
View
0 ...0-recv/board/qemu/x86_64/linux-3.2.config → br-e10-next/board/qemu/x86/linux-3.3.config
File renamed without changes.
View
2 br-e10-next/board/qemu/x86/readme.txt
@@ -1,5 +1,5 @@
Run the emulation with:
- qemu-system-x86_64 -M pc -kernel output/images/bzImage -drive file=output/images/rootfs.ext2,if=ide -append root=/dev/sda
+ qemu-system-i386 -M pc -kernel output/images/bzImage -drive file=output/images/rootfs.ext2,if=ide -append root=/dev/sda
The login prompt will appear in the graphical window.
View
0 br-e10-recv/board/qemu/x86/linux-3.2.config → ...0-next/board/qemu/x86_64/linux-3.3.config
File renamed without changes.
View
6 br-e10-next/boot/barebox/Config.in
@@ -8,7 +8,7 @@ config BR2_TARGET_BAREBOX
if BR2_TARGET_BAREBOX
choice
prompt "version"
- default BR2_TARGET_BAREBOX_2012_02
+ default BR2_TARGET_BAREBOX_2012_03
help
Select the specific Barebox version you want to use
@@ -22,6 +22,9 @@ config BR2_TARGET_BAREBOX_2012_01
config BR2_TARGET_BAREBOX_2012_02
bool "2012.02"
+config BR2_TARGET_BAREBOX_2012_03
+ bool "2012.03"
+
config BR2_TARGET_BAREBOX_CUSTOM_TARBALL
bool "Custom tarball"
@@ -42,6 +45,7 @@ config BR2_TARGET_BAREBOX_VERSION
default "2011.12.0" if BR2_TARGET_BAREBOX_2011_12
default "2012.01.0" if BR2_TARGET_BAREBOX_2012_01
default "2012.02.0" if BR2_TARGET_BAREBOX_2012_02
+ default "2012.03.0" if BR2_TARGET_BAREBOX_2012_03
default "custom" if BR2_TARGET_BAREBOX_CUSTOM_TARBALL
default $BR2_TARGET_BAREBOX_CUSTOM_GIT_VERSION if BR2_TARGET_BAREBOX_CUSTOM_GIT
View
2 br-e10-next/boot/syslinux/Config.in
@@ -5,6 +5,8 @@ config BR2_TARGET_SYSLINUX
The syslinux bootloader for x86 systems.
This includes: syslinux, pxelinux, extlinux.
+ http://syslinux.org
+
config BR2_TARGET_SYSLINUX_ISOLINUX
bool "Install isolinux"
depends on BR2_TARGET_SYSLINUX
View
6 br-e10-next/configs/at91sam9260dfc_defconfig
@@ -2,6 +2,10 @@
BR2_arm=y
BR2_arm926t=y
+# Host utilities
+#
+BR2_PACKAGE_HOST_SAM_BA=y
+
# First stage bootloader
BR2_TARGET_AT91BOOTSTRAP=y
BR2_TARGET_AT91BOOTSTRAP_BOARD="at91sam9260ek"
@@ -15,7 +19,7 @@ BR2_TARGET_UBOOT_2011_12=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_USE_DEFCONFIG=y
-BR2_LINUX_KERNEL_DEFCONFIG="at91sam9260ek"
+BR2_LINUX_KERNEL_DEFCONFIG="at91sam9260"
# Filesystem
BR2_TARGET_ROOTFS_TAR=y
View
4 br-e10-next/configs/at91sam9261ek_defconfig
@@ -2,6 +2,10 @@
BR2_arm=y
BR2_arm926t=y
+# Host utilities
+#
+BR2_PACKAGE_HOST_SAM_BA=y
+
# First stage bootloader
BR2_TARGET_AT91BOOTSTRAP=y
BR2_TARGET_AT91BOOTSTRAP_BOARD="at91sam9261ek"
View
4 br-e10-next/configs/at91sam9263ek_defconfig
@@ -2,6 +2,10 @@
BR2_arm=y
BR2_arm926t=y
+# Host utilities
+#
+BR2_PACKAGE_HOST_SAM_BA=y
+
# First stage bootloader
BR2_TARGET_AT91BOOTSTRAP=y
BR2_TARGET_AT91BOOTSTRAP_BOARD="at91sam9263ek"
View
4 br-e10-next/configs/at91sam9g20dfc_defconfig
@@ -2,6 +2,10 @@
BR2_arm=y
BR2_arm926t=y
+# Host utilities
+#
+BR2_PACKAGE_HOST_SAM_BA=y
+
# First stage bootloader
BR2_TARGET_AT91BOOTSTRAP=y
BR2_TARGET_AT91BOOTSTRAP_BOARD="at91sam9g20ek"
View
3 br-e10-next/configs/atngw100_defconfig
@@ -18,7 +18,4 @@ BR2_TARGET_UBOOT_2010_09=y
# Kernel
BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="2.6.35"
-BR2_LINUX_KERNEL_USE_DEFCONFIG=y
BR2_LINUX_KERNEL_DEFCONFIG="atngw100"
View
6 br-e10-next/configs/ea3250_defconfig
@@ -12,6 +12,12 @@ BR2_ARM_EABI=y
BR2_GCC_VERSION_4_3_X=y
+#
+# Host utilities
+#
+BR2_PACKAGE_HOST_LPC3250LOADER=y
+
+
# Bootloaders
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BOARDNAME="ea3250"
View
6 br-e10-next/configs/fdi3250_defconfig
@@ -12,6 +12,12 @@ BR2_ARM_EABI=y
BR2_GCC_VERSION_4_3_X=y
+#
+# Host utilities
+#
+BR2_PACKAGE_HOST_LPC3250LOADER=y
+
+
# Bootloaders
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BOARDNAME="fdi3250"
View
6 br-e10-next/configs/phy3250_defconfig
@@ -12,6 +12,12 @@ BR2_ARM_EABI=y
BR2_GCC_VERSION_4_3_X=y
+#
+# Host utilities
+#
+BR2_PACKAGE_HOST_LPC3250LOADER=y
+
+
# Bootloaders
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BOARDNAME="phy3250"
View
4 br-e10-next/configs/qemu_arm_versatile_defconfig
@@ -13,7 +13,7 @@ BR2_TARGET_ROOTFS_EXT2=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.2.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.3"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-3.2.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-3.3.config"
BR2_LINUX_KERNEL_ZIMAGE=y
View
16 br-e10-next/configs/qemu_microblazebe_mmu_defconfig
@@ -0,0 +1,16 @@
+BR2_microblaze=y
+BR2_microblazebe=y
+BR2_TOOLCHAIN_EXTERNAL=y
+BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEBE_V2=y
+BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y
+BR2_TOOLCHAIN_EXTERNAL_CUSTOM_GLIBC=y
+BR2_TOOLCHAIN_EXTERNAL_CXX=y
+BR2_TARGET_GENERIC_GETTY_PORT="ttyUL0"
+# BR2_TARGET_ROOTFS_TAR is not set
+BR2_TARGET_ROOTFS_INITRAMFS=y
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazebe-mmu/kernel-3.3.config"
+BR2_LINUX_KERNEL_DTS_FILE="board/qemu/microblazebe-mmu/system.dts"
+BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y
+BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="linux.bin"
View
17 br-e10-next/configs/qemu_microblazeel_mmu_defconfig
@@ -0,0 +1,17 @@
+BR2_microblaze=y
+BR2_microblazeel=y
+BR2_TOOLCHAIN_EXTERNAL=y
+BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEEL_V2=y
+BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y
+BR2_TOOLCHAIN_EXTERNAL_CUSTOM_PREFIX="microblazeel-unknown-linux-gnu"
+BR2_TOOLCHAIN_EXTERNAL_CUSTOM_GLIBC=y
+BR2_TOOLCHAIN_EXTERNAL_CXX=y
+BR2_TARGET_GENERIC_GETTY_PORT="ttyUL0"
+# BR2_TARGET_ROOTFS_TAR is not set
+BR2_TARGET_ROOTFS_INITRAMFS=y
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazeel-mmu/kernel-3.3.config"
+BR2_LINUX_KERNEL_DTS_FILE="board/qemu/microblazeel-mmu/system.dts"
+BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y
+BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="linux.bin"
View
4 br-e10-next/configs/qemu_mips_malta_defconfig
@@ -9,9 +9,9 @@ BR2_TARGET_ROOTFS_EXT2=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.2.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.3"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips-malta/linux-3.2.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips-malta/linux-3.3.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Serial port config
View
4 br-e10-next/configs/qemu_mipsel_malta_defconfig
@@ -9,9 +9,9 @@ BR2_TARGET_ROOTFS_EXT2=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.2.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.3"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mipsel-malta/linux-3.2.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mipsel-malta/linux-3.3.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Serial port config
View
4 br-e10-next/configs/qemu_ppc_g3beige_defconfig
@@ -9,9 +9,9 @@ BR2_TARGET_ROOTFS_EXT2=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.2.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.3"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/powerpc-g3beige/linux-3.2.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/powerpc-g3beige/linux-3.3.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Serial port config
View
5 br-e10-next/configs/qemu_sh4_r2d_defconfig
@@ -10,6 +10,9 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttySC1"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
+# Avoid 3.3+ headers
+BR2_KERNEL_HEADERS_3_2=y
+
# The kernel wants to use the -m4-nofpu option to make sure that it
# doesn't use floating point operations.
BR2_GCC_VERSION_4_5_X=y
@@ -18,7 +21,7 @@ BR2_EXTRA_GCC_CONFIG_OPTIONS="--with-multilib-list=m4,m4-nofpu"
# Linux kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.2.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.2.12"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4-r2d/linux-3.2.config"
BR2_LINUX_KERNEL_ZIMAGE=y
View
2 br-e10-next/configs/qemu_sparc_ss10_defconfig
@@ -9,6 +9,6 @@ BR2_TARGET_ROOTFS_EXT2=y
# Linux kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.2.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.3"
BR2_LINUX_KERNEL_DEFCONFIG="sparc32"
BR2_LINUX_KERNEL_ZIMAGE=y
View
4 br-e10-next/configs/qemu_x86_64_defconfig
@@ -12,6 +12,6 @@ BR2_TARGET_ROOTFS_EXT2=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.2.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.3"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-3.2.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-3.3.config"
View
4 br-e10-next/configs/qemu_x86_defconfig
@@ -13,6 +13,6 @@ BR2_TARGET_ROOTFS_EXT2=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.2.6"