TLnodeFW - Firmware for the RockingDLabs TLnode
An application to run on the TLnode hardware and report sensor values to an MQTT server.
Prerequisits for execution
In order for the system_get_vdd33() function to work, the byte 107 in the init section of flash must be set to 0xff. The esp_init_data_vccRead.bin is a copy of the esp_init_data_default.bin file from v1.3.0 of the ESP SDK with byte 107 changed from 0x00 to 0xff. Write the file to flash with a command like this:
$ esptool.py --port /dev/ttyUSB0 \ write_flash 0x7c000 esp_init_data_vccRead.bin
The above command has been added to the Makefile.
Prerequisits for build
- ESP SDK v1.3.0 (automatically installed by
- A copy of esp_mqtt in the
modules/esp_mqtt/directory. (Working code was built with commit #7247e3f of that project.)
Build and Install
Adjust the paths in
paths.incfor your setup.
Adjust the settings in
include/mqtt_config.hto match your network.
Install (put your target system in bootloader mode first):
$ make flash
LICENSE.txt - permissions for copying this project.
.gitignore - This is a list of files that should not be committed.
paths.tmpl - Environment variables that point the build tools.
DO NOT MODIFY paths.tmpl Copy it to
paths.incand make your changes there.
paths.incis listed in
.gitignoreso that it will not get committed. This both protects you from inadvertentely sharing information about your environment when you share your git archive and prevents dualing commits.
driver/ - auxillary code
- the uart driver is included here.
include/ - application header files
include/mqtt_config.tmpl - Configuration of the MQTT network
DO NOT MODIFY include/mqtt_config.tmpl Copy it to
include/mqtt_config.hand make your changes there.
include/mqtt_config.his listed in
include/.gitignoreso that it will not get committed. This both protects you from inadvertentely sharing information about your network when you share your git archive and prevents dualing commits.
include/drivers - header files for drivers
- header files for the uart driver are here
licenses/ - licenses for code that is used by, but not part of the project. GPL-v3 is included here to cover the uart driver.
user/ - The top level code
Copyright 2015 Jerry Dunmire This file is part of TLnodeFW
TLnodeFW is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version.
TLnodeFW is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with TLnodeFW. If not, see http://www.gnu.org/licenses/.
Files that are not part of TLnodeFW are clearly identified at the top of each of the files. These files are distributed under terms noted in each of the files.