Skip to content
Fetching contributors…
Cannot retrieve contributors at this time
162 lines (98 sloc) 4.01 KB
# Sample configuration file for Polipo. -*-sh-*-
# You should not need to use a configuration file; all configuration
# variables have reasonable defaults. If you want to use one, you
# can copy this to /etc/polipo/config or to ~/.polipo and modify.
# This file only contains some of the configuration variables; see the
# list given by ``polipo -v'' and the manual for more.
### Basic configuration
### *******************
# Uncomment one of these if you want to allow remote clients to
# connect:
# proxyAddress = "::0" # both IPv4 and IPv6
# proxyAddress = "0.0.0.0" # IPv4 only
# If you do that, you'll want to restrict the set of hosts allowed to
# connect:
# allowedClients = 127.0.0.1, 134.157.168.57
# allowedClients = 127.0.0.1, 134.157.168.0/24
# Uncomment this if you want your Polipo to identify itself by
# something else than the host name:
# proxyName = "polipo.example.org"
# Uncomment this if there's only one user using this instance of Polipo:
# cacheIsShared = false
# Uncomment this if you want to use a parent proxy:
# parentProxy = "squid.example.org:3128"
# Uncomment this if you want to use a parent SOCKS proxy:
# socksParentProxy = "localhost:9050"
# socksProxyType = socks5
# Uncomment this if you want to scrub private information from the log:
# scrubLogs = true
### Memory
### ******
# Uncomment this if you want Polipo to use a ridiculously small amount
# of memory (a hundred C-64 worth or so):
# chunkHighMark = 819200
# objectHighMark = 128
# Uncomment this if you've got plenty of memory:
# chunkHighMark = 50331648
# objectHighMark = 16384
### On-disk data
### ************
# Uncomment this if you want to disable the on-disk cache:
# diskCacheRoot = ""
# Uncomment this if you want to put the on-disk cache in a
# non-standard location:
# diskCacheRoot = "~/.polipo-cache/"
# Uncomment this if you want to disable the local web server:
# localDocumentRoot = ""
# Uncomment this if you want to enable the pages under /polipo/index?
# and /polipo/servers?. This is a serious privacy leak if your proxy
# is shared.
# disableIndexing = false
# disableServersList = false
### Domain Name System
### ******************
# Uncomment this if you want to contact IPv4 hosts only (and make DNS
# queries somewhat faster):
# dnsQueryIPv6 = no
# Uncomment this if you want Polipo to prefer IPv4 to IPv6 for
# double-stack hosts:
# dnsQueryIPv6 = reluctantly
# Uncomment this to disable Polipo's DNS resolver and use the system's
# default resolver instead. If you do that, Polipo will freeze during
# every DNS query:
# dnsUseGethostbyname = yes
### HTTP
### ****
# Uncomment this if you want to enable detection of proxy loops.
# This will cause your hostname (or whatever you put into proxyName
# above) to be included in every request:
# disableVia=false
# Uncomment this if you want to slightly reduce the amount of
# information that you leak about yourself:
# censoredHeaders = from, accept-language
# censorReferer = maybe
# Uncomment this if you're paranoid. This will break a lot of sites,
# though:
# censoredHeaders = set-cookie, cookie, cookie2, from, accept-language
# censorReferer = true
# Uncomment this if you want to use Poor Man's Multiplexing; increase
# the sizes if you're on a fast line. They should each amount to a few
# seconds' worth of transfer; if pmmSize is small, you'll want
# pmmFirstSize to be larger.
# Note that PMM is somewhat unreliable.
# pmmFirstSize = 16384
# pmmSize = 8192
# Uncomment this if your user-agent does something reasonable with
# Warning headers (most don't):
# relaxTransparency = maybe
# Uncomment this if you never want to revalidate instances for which
# data is available (this is not a good idea):
# relaxTransparency = yes
# Uncomment this if you have no network:
# proxyOffline = yes
# Uncomment this if you want to avoid revalidating instances with a
# Vary header (this is not a good idea):
# mindlesslyCacheVary = true
# Uncomment this if you want to add a no-transform directive to all
# outgoing requests.
# alwaysAddNoTransform = true
Jump to Line
Something went wrong with that request. Please try again.