A Morse Code Transceiver On a Microbit
Switch branches/tags
Nothing to show
Clone or download
jg00dman Update README.md
corrected a couple of bits
Latest commit ceea7f8 Feb 25, 2017
Failed to load latest commit information.
.gitignore Initial commit Feb 10, 2017
LICENSE Initial commit Feb 10, 2017
README.md Update README.md Feb 25, 2017
m0rvj_microbit_cw_transceiver.py v1 Initial public release Feb 10, 2017



A Morse Code Transceiver On a Microbit


Send and receive morse Press B, or use Capacitive touch on pin 2, Connect Speaker to pin 0 and GND or buzzer/haptic motor to pin 1, Button A shows and clears the received message.

Additional Features in latest dev branch: menu accessed by shaking. Send a character to change settings for Speed A-F, Pitch G-M, Channel N-S and Power U=Low V=High. Settings are saved and reloaded after power cycle.

A video of the project in operation is here: https://www.youtube.com/watch?v=aiiqsJZU4Y8&t=19s

Connected MI:Power boards from https://www.kitronik.co.uk/5610-mipower-board-for-the-bbc-microbit.html These make sweet little gadgets. Range is whole house through walls so far as I can tell. I wanted to bundle a tutor mode but I think it will need to be written in C because micropython takes up too much space.