Skip to content
Switch branches/tags

Latest commit


Git stats


Failed to load latest commit information.
Latest commit message
Commit time

Build Status

Turtle - A wrapper on the RabbitMQ Erlang Client

The turtle application is built to be a wrapper around the RabbitMQ standard Erlang driver. The purpose is to enable faster implementation and use of RabbitMQ by factoring out common tasks into a specific application targeted toward ease of use.

The secondary purpose is to make the Erlang client better behaving toward an OTP setup. The official client makes lots of assumptions which are not always true in an OTP setting.

The features of turtle are:

  • Maintain RabbitMQ connections and automate re-connections if the network is temporarily severed. Provides the invariant that there is always a process knowing the connection state toward RabbitMQ. If the connection is down, you will receive errors back.

  • Provide support for having multiple connection points to the RabbitMQ cluster. On failure the client will try the next client in the group. On too many failures on a group, connect to a backup group instead. This allows a client the ability to use a backup cluster in another data center, should the primary cluster break down.

  • Support easy subscription where each received message is handled by a stateful callback function supplied by the application.

  • Support easy message sending anywhere in the application by introducing a connection proxy.

  • Support RPC style calls in RabbitMQ over the connection proxy. This allows a caller to block on an AMQP style RPC message since the connection proxy handles the asynchronous non-blocking behavior.

  • Tracks timing of most calls. This allows you to gather metrics on the behavior of underlying systems and in turn handle erroneous cases proactively.

  • Implements embeddable supervision trees which are added to your application. Handles errors gracefully and makes sure connections are reaped correctly toward the RabbitMQ cluster.

  • Uses exometer to track statistics automatically for proxies and services. This allows one to gather information about the behavior of how the application uses RabbitMQ.


The Turtle application deliberately exposes the underlying RabbitMQ configuration to the user. This allows the user to handle most low-level RabbitMQ settings directly without having to learn a new language of configuration.

Furthermore, the goal is to wrap the rabbitmq-erlang-client, provide a helpful layer and then get out of the way. The goal is not to make a replacement which covers every use case. Just common tasks in RabbitMQ. That is, we aim to be a 80% solution, not a complete solution to every problem you might have.

What we do not solve

Very specific and intricate RabbitMQ connections are better handled directly with the driver. This project aims to capture common use cases and make them easier to handle so you have to handle less low-level aspects of the driver.

Things have been added somewhat on-demand. There are definitely setups which are outside the scope of this library/application. But it is general enough to handle most messaging patterns we've seen over the years when using RabbitMQ.

The rabbitmq-erlang-driver is a complex beast. Way too complex one could argue. And it requires you to trap exits in order to handle it correctly. We can't solve these problems inside the driver, but we can raise a scaffold around the driver in order to protect the remainder of the system against it.

Performance considerations

Turtle has been tested in a simple localhost setup in which is can 50.000 RPC roundtrips per second. This is the current known lower bound for the system, and given improvement in RabbitMQ and the Erlang subsystem this number may become better over time. It is unlikely to become worse.


  • Upcoming

    • Upgrade dependencies; exometer_core and lager
  • Version 1.9.4 - Introduce Connection Name Validation

    • Connection names are now validated when a publisher or a service is created. So turtle now fails, if a service or publisher is started with a connection that is not defined in the connection_config section of turtle's application environment.

    • Upgrade to AMQP Client version 3.7.5, fixing builds on Erlang 19. This build bug was caused by the ranch_proxy_protocol hex package being packed using a buggy vendored version of erl_tar.

  • Version 1.9.3 - Dependency bump

    • Upgrade Turtle to the 3.7.4 version of AMQP Client.
  • Version 1.9.2 - Dependency bump

    • DEPENDENT BUG RabbitMQ in version 3.6.x uses the "mochinum" module in the system. They imported this module verbatim with no renaming. As a result, if you depend on any other package which eventually uses "mochinum", then that version of RabbitMQ cannot be used simultaneously and this breaks the system.

      The problem has been fixed in 3.7.x, where the module has been properly renamed. We've updated the dependencies accordingly.

  • Version 1.9.1 - Service fix

    • BUG: If the RabbitMQ AMQP client dies, the supervision trees created in applications from turtle were not correctly detecting the erroneous case. This leads to a no-service situation without crashing. The fix correctly monitors the AMQP clients behavior and crashes appropriate parts of the supervision trees if the error occurs.
  • Version 1.9.0 - Important major bugfix release

    • SERIOUS BUG: The RabbitMQ AMQP client has no notion of a controlling process, but Turtle assumed it did. The consequence is that errors in workers leads to a situation where you have channels in a "limbo" state: not known to Turtle, but known to the client and the AMQP server.

      Messages which have been prefetched into these channels can never be acked nor rejected, because the tag is lost in a mailbox of a crashing process. The system thus slowly fills up prefetch slots until the system comes to a halt.

      Note periodic connection resets would fix the bug. Periodic connection resets happens somewhat weekly on the Amazon AWS platform which is why we didn't find this bug earlier.

      The solution taken for Turtle is to introduce a turtle_janitor process which maintains the channels and connections that has been handed out. The janitor monitors and closes connections and channels upon failure.

    • POTENTIAL INCOMPATIBIILTY: As a result of introducing a janitorial process, we can remove most of the trap_exit from the turtle processes. They don't have to clean up themselves anymore since the janitor is doing it for them. All in all, the system becomes far more Erlang-idiomatic.

      The fallout, however, is that if you have relied on trap-exit in the process, you can't anymore, so one has to look out for this incompatible change.

    • Connections now supports global deadlines. A configuration of a connection can take a deadline timeout. If no connection is made within the deadline, the supervisor tree of turtle crashes. Once it has crashed 3 times, the Erlang node will terminate. That is, if you set a timeout of 300*1000 (5 minutes) then at 15 minutes of no operation, the Erlang node will fail.

    • Use packages

    • Build/Test via Travis CI

  • Version 1.8.1 - Maintenance release

    • The child spec validator had a bug where callback/5 functions were rejected as wrong. These are correct in bulk mode, so accept both /4 and /5 for now.
  • Version 1.8.0 - Make await an officially supported feature

    • Support turtle:await/2 which allows your system to wait for the presence of a publisher. This is highly useful in startup scenarios, where parts of your system needs to wait on other parts of the system to be ready before they can operate.
  • Version 1.7.2 — Maintenance release

    • Use the rand module in Turtle from now on. Readies ourselves for Erlang/OTP 20

    • Use 'erlang-lager/lager' in version 3.2.4 in order to support the newly formed lager organization.

  • Version 1.7.1 — Erlang/OTP 19.x support

    • Potential incompatibility: The versions of rabbit_common and amqp_client are now locked to version 3.6.2, with a fix for Erlang/OTP 19 compiles. This means turtle can be used with the newest Erlang version. There has not been much testing as of this patch, but the purpose is to enable forward adoption.
  • Version 1.7.0 — Bulk messaging support

    • Potential incompatibility: The handle_info/2 callback when doing subscription services can now be called in more situations. Make sure your callback handle unknown messages by ignoring them. Otherwise your service may fail.

    • (Experimental) Add support for handling messages in bulk. See the appropriate section in the README file in order to use it. For now, this feature is experimental and subject to change if something doesn't work out.

    • Implement a change where turtle_cannel is renamed into turtle_service_mgr and draws no channels by itself. Rather, channels is now the domain of turtle_subscriber. This change moves the channel scope onto individual processes, which opens the design space for further improvement.

  • Version 1.6.2 — Maintenance release

    • (Tim Stewart) Support more error cases in the connection loop. Tim has seen problems with the connection process on Docker instances, and retrying seem to make the trouble go away. The change also plugs the possibility of other connections failing.

    • (Sougat Chakraborty) Implementation towards dynamic publisher takeovers. This allows dynamic replacement of publishers with new publishers. In turn, one can manage a supervised child and replace it with newly updated configuration as time goes on.

  • Version 1.6.1 — Make exometer probes known earlier in the connection cycle.

    • exometer probes are now known at configuration time rather than when a connection is successful. This allows you to subscribe the probes into exometer_report earlier when you start up your application.
  • Version 1.6.0 — Feature release. There is a number of new features:

    • Support updating of service/consumer configuration while the system is running. This has been provided by MakeMeFree/m2f.

    • Support supplying Ports as strings. They will be converted to their integer-type as a result.

  • Version 1.5.3 — Fix a robustness problem with the supervisor tree. If the worker pools failed too often, the system would fail to escalate the error upwards through the supervisor trees. Key supervisors were erroneously declared as transient where they should have been declared as permanent.

  • Version 1.5.2 — Introduce the ability for workers to {stop, Reason, …}, which allows a worker to crash while simultaneously rejecting the messages it is processing. This avoids destroying the message which is currently in the queue, while allowing you to get back to an invariant state.

  • Version 1.5.1 — Fix a bug in which a crash in the subscribers handler function could lead to unacked message leaks under moderate to high load.

  • Version 1.5.0 — Support a forced passive mode on declarations. Setting this will force turtle to set passive creation on every exchange and queue. This is intended to be used in the case where you have pre-created queues and want to verify the existence of such queues.

  • Version 1.4.3 — Fix an error in the handling of crashing functions bound to a subscriber. If a subscriber function crashed, we would incorrectly supply a wrong return value which would crash the subscriber. In turn, the errorneous message would never be removed from the queue.

  • Version 1.4.2 — Introduce a new way to write child_specs through helper functions in their respective modules. Ensures we have a hook point later for better validation of parameters.

  • Version 1.4.1 — Documentation updates to make it easier to use the application and explain its purpose better.

  • Version 1.4.0 — First Open Source release. Every change will be relative to this release version.


Turtle is an OTP application with a single supervisor. Given a configuration in sys.config, Turtle maintains connections to the RabbitMQ clusters given in the configuration in this supervisor.

Every other part of turtle provides a supervisor tree/worker process which can be linked into the supervisor tree of a client application. This design makes sure that connections live and die with its surrounding application. Monitors on the connection maintainers makes sure the tree is correctly closed/stopped/restarted if a connection dies.

Turtle uses gproc as its registry. Every connection, channel, service of proxy is registered in gproc under {n,l,{turtle,Kind, Name}} where Kind signifies what kind of registration it is for.

There are two kinds of children you can link into your applications supervisor tree:

  • Publishers - These form a connection endpoint/proxy toward RabbitMQ. They allow for publication by sending messages, and also for doing RPC calls over RabbitMQ. Usually, one publisher is enough for an Erlang node, even though every message factors through the publisher proxy. But in setups with lots of load, having multiple publishers may be necessary.

  • Subscribers - These maintain a pool of workers which handle incoming messages on a Queue. Each worker runs a (stateful) callback module which allows the application to easily handle incoming requests through a processor function.


Turtle is built using rebar3. Turtle is built primarily for Erlang/OTP release 18 and later, but it should be usable in release 17.5 as well. You can build turtle with a simple

make compile

or by using rebar directly:

rebar3 compile


The tests has a prerequisite which is a running RabbitMQ instance on localhost port 5672`. In the Travis CI environment, we request such a server to be running, so we can carry out tests against it, but for local development, you will need to add such a server to the environment.

Running tests is as simple as:

make test


Turtle was created to alleviate a common need in many systems we had. As we started to move more and more work into a messaging platform based on RabbitMQ, common patterns emerged. This application captures these common patterns and solves the low-level work once and for all.

In addition, by factoring all users through a single implementation, we have an obvious hook-point for statistics, and logging. And as we fix errors, we fix those in all dependent applications.


To use the turtle application, your sys.config must define a set of connections to keep toward the RabbitMQ cluster. And you must provide publishers/services into your own applications supervisor tree. We will address each of these in a separate section.


Turtle is configured with a set of connector descriptors. These goes into a turtle section inside your sys.config:

    %% Turtle configuration
    {turtle, [
        {connection_config, [
                conn_name => amqp_server,

                username => "phineas",
                password => "ferb",
                virtual_host => "/tri-state-area",

                deadline => 300000,
                connections => [
                    {main, [
                      {"", 5672 },
                      {"", 5672 } ]},
                    {backup, [
                      {"", 5672 } ]} ]

This will set up two connection groups. The first group is the Danville group with two hosts and the second is the Doofenschmirtz group. Turtle will try amqp-1 and amqp-2 in a round-robin fashion for a while. Upon failure it will fall back to the backup group.

The deadline parameter tells the system when to globally fail the connection attempts. If no connection is made within the deadline, then the system will crash the connection process inside turtle. The supervisor tree will restart it, but this happens at most 3 times before the node is killed. E.g., setting a deadline of 1 minute (60000 milli-seconds) will make the turtle application fail at 3 minutes if no connection can be made within that time-frame.

The deadline parameter can be omitted, in which case there is no deadline.

DISCUSSION: We tend to keep our systems without a deadline and rely on error logging to tell us that something is wrong. But it may be wise to guarantee some kind of progress on the AMQP connection for a system which relies on AMQP connections to be present before they can properly operate. The thing you will be balancing is how long to wait for a network to settle and AMQP to be available versus detecting a problem with the connections of nodes. Setting a value too low is likely pose problems when your system has dependencies among its services. Setting it too high tells you there are problems too late.

There is currently not auth-mechanism support, but this should be fairly easy to add.

Once the configuration is given, you can configure applications to use the connection name amqp_server and it will refer to connections with that name. As such, you can add another connection to another rabbitmq cluster and Turtle knows how to keep them apart.

Message publication

Turtle provides a simple publication proxy which makes it easier to publish messages on RabbitMQ for other workers. Here is how to use it.

First, you introduce the publisher into your own supervisor tree. For instance by writing:

    %% AMQP Publisher
    Exch = <<"my_exchange">>,
    PublisherName = my_publisher,
    ConnName = amqp_server, %% As given above
    AMQPDecls = [
      #'exchange.declare' { exchange = Exch, type = <<"topic">>, durable = false }
    AMQPPoolChildSpec =
        turtle_publisher:child_spec(PublisherName, ConnName, AMQPDecls,
            #{ confirms => true, passive => false }),

Note that AMQPArgs takes a list of AMQP declarations which can be used to create exchanges, queues, and so on. The publisher will verify that each of these declarations succeed and will crash if that is not the case.

Note the option #{ confirms => true } which is used to signify that we want the exchange to confirm publications back to us. This is automatically handled by the publisher if you use it for RPC style messaging.

Also, note the option #{ passive => false }. You can force passive declarations by setting this to true in which case declarations will set the passive flag where applicable. This ensures you only verify the presence of exchanges/queues on the broker rather than idempotently create them. In a development setting, it is nice to automatically create missing exchanges and queues, but in a production system you may want to create them beforehand.

Once we have a publisher in our tree, we can use it through the turtle module. The API of turtle is envisioned to be stable, so using it is recommended over using the turtle publisher directly.

Note: The name my_publisher is registered under gproc with a name unique to the turtle application.

To publish messages on my_publisher we write:

        #{ delivery_mode => persistent | ephemeral }).

This will asynchronously deliver a message on AMQP on the given exchange, with a given routing key, a given Media Type and a given Payload. The option list allows you to easily control if the delivery should be persistent or ephemeral (the latter meaning that rabbitmq may throw away the message on an error).

Remote procedure calls

To enable the RPC mechanism, you must change the configuration of publisher process like the following:

    %% AMQP Publisher
    Exch = …,
    AMQPDecls = [ … ],
    AMQPPoolChildSpec =
        turtle_publisher:child_spec(PublisherName, ConnName, AMQPDecls,
              confirms => true,
              passive => false,
              rpc => enable

In particular, the configuration adds the rpc => enable binding, but is otherwise the same as the above publisher configuration. This makes the publisher configure itself for retrival of RPC messages by declaring an exclusive reply_to queue for itself.

The RPC mechanism of the publisher might at first look a bit "off" but there is a reason to the madness. Executing RPC calls runs in two phases. First, you publish a Query. This results in a publication confirmation being received back. This confirmation acts as a future which you can wait on, or cancel later on. By splitting the work into two phases, the API allows a process to avoid blocking on the RPC calls should it wish to do so.

For your convenience, the RPC system provides a call for standard blocking synchronous delivery which is based on the primitives we describe below. To make an RPC call, execute:

    case turtle:rpc_sync(my_publisher, Exch, RKey, Ctype, Payload) of
      {error, Reason} -> ...;
      {ok, NTime, CType, Payload} -> ...

The response contains the NTime which is the time it took to process the RPC for the underlying system.

To run an RPC call asynchronously, you first execute the rpc/5 call:

    {ok, FToken, Time} =
      turtle:rpc(my_publisher, Exch, RKey, CType, Payload),

This returns an FToken, which is the future of the computation. It also returns the value Time which is the number of milli-seconds it took for the RabbitMQ server to confirm the publication.

The result is delivered into the mailbox of the application when it arrives.


  • All RPC delivery is ephemeral. The reason for this is that we assume RPC messages are short-lived and if there is any kind of error, then we assume that systems can idempotently re-execute their RPC call. The semantics of RabbitMQ strongly suggests this is the safe bet, as guaranteed delivery is a corner case that may fail under network partitions.
  • Since results are delivered into the mailbox, you may need to arrange for their arrival in your application if you consume every kind of message in the mailbox. In the following, we will describe the message format that gets delivered, so you are able to handle this.

A message is delivered once the reply happens. This message has the following format:

    {rpc_reply, FToken, NTime, ContentType, Payload}

Where FToken refers to the future in the confirmation call above, NTime is the time it took for the message roundtrip, in native representation, and ContentType and Payload is the result of the RPC call.

To conveniently block and wait on such a message, you can call a function:

    case turtle:rpc_await(my_publisher, FToken, Timeout) of
        {error, Reason} -> {error, Reason};
        {ok, NTime, ContentType, Payload} -> ...

This will also monitor my_publisher. If you want to monitor yourself, you can use

    Pid = turtle_publisher:where(Publisher),
    MRef = monitor(process, Pid),

and then use the turtle:rpc_await_monitor/3 call.

You can also call turtle:rpc_cancel/2 to cancel futures and ignore them. This doesn't carry any guarantee that the RPC won't be executed however.

Message Subscription

The "other" direction is when Turtle acts like a "server", receives messages from RabbitMQ and processes them. In this setup, you provide a callback function to the turtle system and it invokes this function (in its own context) for each message that is received over RabbitMQ.

Turtle supports two messaging modes: single and bulk. First we describe single-delivery, which is the default mode. In this mode, each message is processed in isolation. The other mode, bulk, is described later on and allows you to gather multiple messages into your callback state and batch process them towards the other end.

Single-mode subscription

Configuration allows you to set QoS parameters on the line and also configure how many workers should be attached to the RabbitMQ queue for the service. In turn, this provides a simple connection limiter if one wishes to limit the amount of simultaneous work to carry out. In many settings, some limit is in order to make sure you don't accidentally flood the machine with more work than it can handle.

To configure a supervisor tree for receiving messages, you create a child specification for it as in the following:

    Config = #{
      name => Name,
      connection => amqp_server,
      function => fun CallbackMod:loop/4,
      handle_info => fun CallbackMod:handle_info/2,
      init_state => #{ ... },
      declarations =>
          [#'exchange.declare' { exchange = Exch, type = <<"topic">>, durable = true },
           #'queue.declare' { queue = Q, durable = true },
           #'queue.bind' {
               queue = Q,
               exchange = Exch,
               routing_key = Bind }],
      subscriber_count => SC,
      prefetch_count => PC,
      consume_queue => Q,
      passive => false

    ServiceSpec = turtle_service:child_spec(Config),

This configures the Service to run. It will first use the declarations section to declare AMQP queues and bindings. Then it will set QoS options, notably the prefetch_count which by far is the most important options for tuning RabbitMQ. By prefetching a bit of messages in, you can hide the network latency for a worker, which speeds up handling considerably. Even fairly low prefetch settings tend to have good results. You also set a subscriber_count which tells the system how many worker processes to spawn. This can be used as a simple way to introduce an artificial concurrency limit into the system. Some times this is desirable as you can avoid the system flooding other subsystems.

The passive flag works as in the case of the publisher: setting this value to true forces exchange/queue creation to be passive such that creation fails if the queue is not present already on the broker.

Operation works by initializing the system into the value given by init_state. Then, every message is handled by the callback given in function. Unrecognized messages to the process is handled by the handle_info call. This allows you to handle events from the outside.

Note: A current design limitation is that you can only process one message at a time. A truly asynchronous message processor could be written, but we have not had the need yet.

The signature for the callback function is:

    loop(RoutingKey, ContentType, Payload, State) ->
        {remove, State} | {reject, State} | {stop, Reason, State}
        | {ack, State'} | {reply, CType, Payload, State}

The idea is that the loop/4 function processes the message and returns what should happen with the message:

  • Returning remove will reject the message with no requeue. It is intended when you know no other node/process will be able to handle the message. For instance that the data is corrupted.

  • Returning reject is a temporary rejection of the message. It goes back into the queue as per the RabbitMQ semantics and will be redelivered later with the redelivery flag set (we currently have no way to inspect the redelivery state in the framework)

  • The ack return value is used to acknowledge successful processing of the message. It is used in non-RPC settings.

  • The reply return is used to form an RPC reply back to the caller. This correctly uses the reply-to queue and correlation ID of the AMQP message to make a reply back to the caller. Its intended use is in RPC messaging.

  • The stop return is used to crash the subscriber-worker somewhat gracefully. It rejects the message as in reject but also stops the worker, so you can get back to a safe invariant state. The supplied Reason becomes the exit reason for the worker.

If a message is received by the subscription process it doens't understand itself, it is forwarded to the handle_info function:

    handle_info(Info, State) -> {ok, State}.

It is intended to be used to handle a state change upon external events.

Bulk-mode subscription (Experimental)

Note: We think this feature is sound, but currently it has not seen much use and thus, the API might change in the future. We will have to address problems, surely, and some of those might alter the API.

Enabling bulk mode proceeds as single mode configuration, but sets the bulk mode flag on the connection:

    Config = #{
        name => Name,
        function => fun CallbackMod:loop/5,
        handle_info => fun CallbackMod:handle_info/2,

        prefetch_count => PC,
        mode => bulk

This setting will feed messages to your callback function, up to the prefetch_count, PC. Hence, it is advised to set a relatively large prefetch count if batching is desirable. In bulk mode, the callback function looks like:

    loop(RoutingKey, ContentType, Payload, Tag, State) -> {Cmds, State}

where Cmds is a list of (effectful) commands to apply to the RabbitMQ system. The list can be empty, in which case no commands are processed. Note that the loop function also contains an opaque Tag for the incoming message. If you store that tag, you can use it in commands later on in the sequence. The possible commands are:

  • {ack, Tag} — ack the message with Tag.

  • {bulk_ack, Tag} — ack every message up to and including Tag. Only sends a single message to RabbitMQ and is thus quite efficient.

  • {bulk_nack, Tag} — A RabbitMQ extension which is the dual of bulk_ack: reject every message up to and including Tag.

  • {reject, Tag} — Reject the message with Tag requeueing it.

  • {remove, Tag} — Remove the mesage with Tag and do not requeue it (making dead-letter-exchange delivery happen)

  • {reply, Tag, ContentType, Payload} — Reply to the message identified by Tag with a Payload and set its content type to ContentType.

In bulk-mode, the handle_info/2 function is altered in two ways: one, it can now respond with commands to execute, and it will retrieve informational messages if the rabbitmq server goes away as well. The invocation is like:

    handle_info(Info, State) -> {Cmds, State}.

Where Cmds is as above, and Info is either a normal Info-message sent to the subscriber, or the tuple {amqp_shutdown, Reason}. In any other Reason than normal it will not be possible to process any commands, and the subscriber will warn you if you try.

Example: The bulk-mode allows you to micro-batch messages. Set the prefetch count to 1000. When your loop function gets it's first incoming message, you store it and its Tag in the State, and you return {[], NewState} so the message is retained, but no ack is sent.

When the first message is retrieved, you call erlang:send_after(25, self(), batch_timeout) which sets up a 25ms timeout. Now, typically two scenarios can happen:

  • You retrieve 100 messages before the timeout.

  • The timeout triggers.

In any of these cases, you send off the current batch and pick the last Tag of all of these, cancel the timer if necessary[0], and return {[{bulk_ack, Tag}], NewState}. In turn, you are now batching messages.

More advanced batching will look at the response and figure out if any messages in the batch failed. Then you can individually build up a command list:

    Cmds = [{ack, Tag0}, {ack, Tag1}, {reject, Tag2}, {ack, Tag3}, {remove, Tag4}, …],

so you get the correct messages acked or rejected. You can also handle bulk-reply the same way by replying to invididual messages.

[0] Use the TimerRef to get rid of timers that race you in the mailbox, by ignoring timers which you did not expect.

Operation and failure modes

This section describes the various failure modes of Turtle and how they are handled.

The turtle application will try to keep connections to RabbitMQ at all times. Failing connections restart the connector, but it also acts like a simple circuit breaker if there is no connection. Hence turtle provides the invariant:

For each connection, there is a process. This process may have a connection to RabbitMQ, or it may not, if it is just coming up or has been disconnected.

Connections are registered in gproc so a user can grab the connection state from there. Especially by registering for non-blocking waits until a name (re-)appears.

If a publisher proxy fails, it will affect the supervisor tree in which it is installed in the usual way. Currently active RPCs will be gone. Hence it is advisable to install a monitor in the proxy, as is the case in the exposition above. This will allow a caller blocked on an RPC to react such that you can continue operation.

If a callback function in a service crashes, the corresponding process in the subscription pool will stop abnormally. The errorneous message will be removed permanently from the queue in order to ensure it will not crash other workers bound to the queue. The assumption is that a crashing function is a programming error which should be fixed. If you need access to the message, configure RabbitMQ to use dead-lettering on the queue which will send the message to the dead-letter-exchange (DLX). You can then handle the failing message separately on another queue. If the bound function crashes more than 100 times in an hour, it will reach max restart intensity and restart that part of the supervisor tree.

If a connection dies, every publisher or service relying on it crashes and reaps the supervisor tree accordingly.


A wrapper on the RabbitMQ Erlang Client (Erlang)




No packages published