Skip to content
Find file
Fetching contributors…
Cannot retrieve contributors at this time
41 lines (40 sloc) 1.71 KB
// default thermistor lookup table
// You may be able to improve the accuracy of this table in various ways.
// 1. Measure the actual resistance of the resistor. It's "nominally" 4.7K, but that's ± 5%.
// 2. Measure the actual beta of your thermistor:http://reprap.org/wiki/MeasuringThermistorBeta
// 3. Generate more table entries than you need, then trim down the ones in uninteresting ranges.
// In either case you'll have to regenerate this table, which requires python, which is difficult to install on windows.
// Since you'll have to do some testing to determine the correct temperature for your application anyway, you
// may decide that the effort isn't worth it. Who cares if it's reporting the "right" temperature as long as it's
// keeping the temperature steady enough to print, right?
// ./createTemperatureLookup.py --r0=100000 --t0=25 --r1=0 --r2=4700 --beta=4066 --max-adc=1023
// r0: 100000
// t0: 25
// r1: 0
// r2: 4700
// beta: 4066
// max adc: 1023
#define NUMTEMPS 20
// {ADC, temp*4 }, // temp
uint16_t temptable[NUMTEMPS][2] PROGMEM = {
{1, 3364}, // 841.027617469 C
{54, 1021}, // 255.484742371 C
{107, 836}, // 209.086676326 C
{160, 736}, // 184.041730874 C
{213, 667}, // 166.757734773 C
{266, 613}, // 153.384693074 C
{319, 569}, // 142.306856925 C
{372, 530}, // 132.69219366 C
{425, 496}, // 124.050228124 C
{478, 464}, // 116.059537816 C
{531, 433}, // 108.487976164 C
{584, 404}, // 101.149819461 C
{637, 375}, // 93.8781909528 C
{690, 346}, // 86.5019752148 C
{743, 315}, // 78.8186715355 C
{796, 282}, // 70.5502229207 C
{849, 244}, // 61.2498501294 C
{902, 200}, // 50.050743055 C
{955, 138}, // 34.7070638836 C
{1008, 12} // 3.01733235284 C
};
Jump to Line
Something went wrong with that request. Please try again.