Turn automatically on.

[Snackez]

Is it possible to turn on the Printer when i´m starting a Printing Job ? And afterwards off ?

[Quintin9801]

I have my printer set to automatically turn off with a gcode command at the end of my print (in octoprint ending gcode) however I’m not sure about automatically turning it on when you hit “print” because your printer has to be connected before you click “print”. You can use the connect automatically connect to your octoprint when you turn it on by checking “auto connect”. If you would like any guidance I’ve been using this plugin for quite some time and I love the automation it provides!

…

On Fri, Jul 13, 2018 at 9:57 AM Snackez ***@***.***> wrote: Is it possible to turn on the Printer when i´m starting a Printing Job ? And afterwards off ? — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#32>, or mute the thread <https://github.com/notifications/unsubscribe-auth/Ahk-Ll72k2dNbiKCqrJi9SaJVMb-0jqpks5uGLVHgaJpZM4VPB-w> .

[Quintin9801]

These are my settings for reference, if you are using a sonoff basic you will also need to check “singe relay” in the main settings page. On Fri, Jul 13, 2018 at 10:06 AM Quintin Sheppard <quintin9801@gmail.com> wrote:

…

I have my printer set to automatically turn off with a gcode command at the end of my print (in octoprint ending gcode) however I’m not sure about automatically turning it on when you hit “print” because your printer has to be connected before you click “print”. You can use the connect automatically connect to your octoprint when you turn it on by checking “auto connect”. If you would like any guidance I’ve been using this plugin for quite some time and I love the automation it provides! On Fri, Jul 13, 2018 at 9:57 AM Snackez ***@***.***> wrote: > Is it possible to turn on the Printer when i´m starting a Printing Job ? > And afterwards off ? > > — > You are receiving this because you are subscribed to this thread. > Reply to this email directly, view it on GitHub > <#32>, or mute the > thread > <https://github.com/notifications/unsubscribe-auth/Ahk-Ll72k2dNbiKCqrJi9SaJVMb-0jqpks5uGLVHgaJpZM4VPB-w> > . >

[jneilliii]

In it's current form the printer has to be powered on and connected in order for the plugin to be able to give the commands to control the plug/relay. I included the use of M80 gcode commands for power on for users that were using plugs/relays for external stuff like lights and fans, etc. You can still use the buttons in the navbar to power on your printer though.