iKettle, iKettle 2.0 and Smarter Coffee Interface
To test and finish:
- iKettle Emulation (emulates an iKettle with an iKettle 2.0)
- iKettle Brigde (connect to an iKettle and use it if it was an iKettle 2.0)
- Figure out to correct responses
Such that all features of iBrew are available (if supported) for the original iKettle!
So if you have an original iKettle filled up with water! And some time to spare!
Contact tristan@monkeycat.nl!
- Windows
- [MacOS] (https://dl.dropboxusercontent.com/u/12474226/iBrew.dmg)
- [Source] (https://github.com/Tristan79/iBrew/archive/master.zip)
Now! macOS & windows apps! With nice icon in the taskbar! :-)
Trigger! You can now push your data or run commands! It is now possible to push sensor values and states of the appliances to other smarthome controllers using HTTP or run commands!
Please post links, information or help on interfacing with smarthome controllers software in the issues! There are too many out there for me to test and write guides for them all!. If you are a plugin coder or scripter and you do not have an iKettle or Smarter Coffee, just simulate one!
- Simulates iKettle 2.0
ibrew simulate - Simulates Smarter Coffee machine
ibrew simulate
iBrew is an interface to the iKettle 2.0 and Smarter Coffee devices (and has legacy support for the original iKettle, see below).
Stand alone, no internet or Smarter app needed!
It features!
For smarthome fans!
- Support unlimited iKettle 2.0 or Smarter Coffee appliances! As many as you like!
- Usage statistics!
- No tracking!
- Stand alone or bridge mode!
- HomeKit Support
- HTTP push!
iBrew Interfaces & Bridges
- Command Line (now with iKettle Legacy support)
- Web (almost finished, help appreciated!)
- JSON REST
- Javascript (almost finished :-)
- [Python 2.7] (https://github.com/Tristan79/iBrew/tree/master/smarter)
- Message relay (works with Smarter app!)
Connection Guides
- HomeKit (using HomeBridge)
- Domoticz
- Home Assistant
- OpenHAB
- Smartthings
- Improve your connection with a relay server
- Please share your favorite smarthome controller setup!
No tracking of you or your appliances usage!
For the Smarthome and Domotics Interface experts!
- Kettle and coffee machine simulation (works with Smarter app!)
- Console for Smarter protocol debugging
- Monitor
- Message blocking and patching
- Smarter protocol description (start web interface for a clickable web version :-)
Tested on iKettle 2.0 v19 and SmarterCoffee v20 & v22.
Please share any bugs, jokes, problems, discoveries you made!
It features!
For smarthome fans!
- Command Line
- HomeKit support
- Relay
- Simulator
Check out ikettle-brute-forcer
I would like to thank Ju4ia for letting me access his coffee machine remotely, and get more Smarter Coffee missing protocol bits, and... that I could test the client code. And all the other people helping track down bugs and supplying new features, whether by e-mail or in the issues, Thanks!
Since the console it nearly done, protocol almost fully mapped out. It is time to focus on the webpage... the framework is working, it auto reconnect, keeps some stats and you can even preform some actions with it.
If you have jokes on coffee, tea, hot chocolade, coffee machines or kettles, please post in the issues!
iSamsungTV the command line interface to Samsung TV series C, D, E, F and Blue Ray Disc Players with Smart Hub feature.
Other systems than Windows, MacOS or Pi that are running python see download from source section.
First no python is installed by default so head up over to python and install v2.7 (NOT 3) Secondly you need make and the python win32 package
Use make setupwin to setup
Use make win to create a package
Use make cleanwin to clean up
Once you start the app from the MacOS package (drag it to your application folder first) it will auto link iBrew in your terminal.
Open a terminal and run ibrew and you're all set, good to go!
it creates a soft symlink to /usr/local/bin/ibrew,... :-)
Make sure either the command line or xcode is installed, just run make and it will promt for a download!
Use make setupmac to setup
Use make mac to create a package
Use make cleanmac to clean up
See Pi section.
You can run iBrew on systems that run python 2.7. Download and unpack the source, download it from github using Github Desktop or manually git clone https://github.com/Tristan79/iBrew.git. Finish the setup with running make setup in the iBrew folder to configure the python packages for bare bones operation. Update to the latest version of iBrew with git pull
Bonjour is not enabled by default, to install it use make bonjour or for windows make bonjourwin. But you have to have bonjour installed on your system, macOS its out of the box, on most linux system you can install it with (or try equivalent packages for your *nix distro) apt-get install avahi-daemon avahi-discover libnss-mdns and on Windows you either install iTunes or download it from apple
Also check out pybonjour
Tested on a clean Jessy light image (september 2016).
Use make setuplin to setup
Use make cleanlin to clean up
SSH to the Pi! And use:
cd ~
sudo apt-get install git
sudo apt-get install python-setuptools
sudo easy_install pip
git clone https://github.com/Tristan79/iBrew.git
cd ~/iBrew
sudo make setuplin
sudo ln -s ~/iBrew/ibrew /usr/local/bin/ibrew
Now you can start ibrew from anywhere :-) Type in your terminal
ibrew
Or if you want to start the web interface with event triggers type
ibrew events web
And surf to your pi on port 2080!
You can update to the latest version of iBrew with
cd ~/iBrew
git pull
To add the webserver on boot run
sudo nano /lib/systemd/system/iBrew.service
Copy and paste this text and save with ctrl-x
[Unit]
Description=iBrew
After=multi-user.target
[Service]
Type=simple
ExecStart=/usr/bin/python /home/pi/iBrew/ibrew events web
Restart=on-abort
[Install]
WantedBy=multi-user.target
Then run the additional commands
sudo chmod 644 /lib/systemd/system/iBrew.service
sudo systemctl daemon-reload
sudo systemctl enable iBrew.service
sudo systemctl start iBrew.service
sudo systemctl status iBrew.service
Please post any bug or issues here on github! The error handling is still kinda broken... :-) now use dump to see more. Will revert to debug, info, logging (wip)
- macOS
~/Library/Application Support/iBrew/logs - unix
~/.iBrew/logs - unix (root)
/var/log/iBrew/ - windows
~%APPDATA%\iBrew\logs
- macOS
~/Library/Application Support/iBrew/ - unix
~/.iBrew/ - unix (root)
/etc/iBrew/ - windows
~%APPDATA%\iBrew\logs
MoonTwo:iBrew Tristan$ ./ibrew list
[10.0.0.3:2016-11-13 12:38:24] Found iKettle 2.0 (iBrew certified firmware v19)
[10.0.0.98:2016-11-13 12:38:24] Found Smarter Coffee (iBrew certified firmware v20)
[10.0.0.99:2016-11-13 12:38:24] Found iKettle 2.0 (iBrew certified firmware v19)
Some hints
- Did you download, clone or pull iBrew from git to get the latest version with all the bug fixes?
Network trouble
- Does the Smarter app autodetects it?
- Is a firewall blocking port 2081 on your computer (or on your router)?
- Does
./ibrew listwork? - Make sure that your kettle/coffee machine is on the same network and subnet as your pc and your phone.
- It could be that your router is blocking utp broadcast messages (some do, so it never auto detects).
- Running it on a computer with only a loopback device will result in auto detection be disabled (when using the simulator)
Static IP address
- Look up the IP address of the appliance in your router (dhpc server)
- Set up a static IP address in your router (dhpc server) for your appliance
Reset wireless network
- Reset appliance (iKettle is longer then 10 seconds button hold on base, coffee machine, eeuh I forgot which button but you can use the smarter app to reset your appliance wireless network to direct mode [FIX])
- If the appliance is reset. Try connect with your wifi of your pc (if it has wifi) to the appliance its wireless network access point iKettle:?? or SmarterCoffee:?? try if iBrew works.
- Reconnect to your wifi network (and if you are lucky and could connect with iBrew in direct mode, the command is ./ibrew join namewireless password) else use your phone app.
See the console section for the commands.
iBrew Server
________________
Usage: ibrew (dump) (events) (fahrenheid) server (host:(port) (host:(port))
dump dump message enabled
events enable trigger events (monitor, relay, console)
fahrenheid use fahrenheid
web start web interface & rest api
port optional port number, default 2082
rules blocking & patching rules
host host address of the appliance (format: ip4, ip6, fqdn)
port port of appliance, optional, only use if alternative port
iBrew iKettle Legacy Command Line
_________________________________
Usage: ibrew (dump) legacy command (host(:port))
command iKettle command, action to take!
host host address of the appliance (format: ip4, ip6, fqdn)
port port of appliance, optional, only use if alternative port
iBrew iKettle 2.0 & Smater Coffee Command Line
______________________________________________
Usage: ibrew (dump) (events) (legacy [bridge|emulate] (host:(port))) (shout|slow) (coffee|kettle) (fahrenheid) [command] (host(:port))
bridge emulate iKettle 2.0 using legacy iKettle (NOT IMPlEMENTED)
emulate (host:(port) emulates legacy iKettle
coffee assumes coffee machine
command action to take!
dump dump message enabled
events enable trigger events (monitor, relay, console)
fahrenheid PARTLY WORKING use fahrenheid
host host address of the appliance (format: ip4, ip6, fqdn), only use if detection fails
kettle assumes kettle
port port of appliance, optional, only use if detection fails
shout sends commands and quits not waiting for a reply
slow fully inits everything before action
If you do not supply a host, it will try to connect to the first detected appliance
Thus if you have more then one appliance supply a host (if its not in direct mode)
The following commands are available, note that [] are manditory arguments and () are optional arguments.
Commands
________
iKettle Commands
heat start heating water
stop stop heating water
65 select 65°c
80 select 80°c
95 select 95°c
100 select 100°c
warm start keep water warm
5 select keep water warm timer is set to 5 minutes
10 select keep water warm timer is set to 10 minutes
20 select keep water warm timer is set to 20 minutes
status Get status
protocol protocol information
simulate start kettle simulation
relay ((ip:)port) start relay
iKettle 2.0 & Smarter Coffee Commands
default set default settings
info appliance info
list list detected appliances
reset reset appliance to default
start start the appliance
status (full) show status
settings show user settings
stop stop the appliance
iKettle 2.0 Commands
base show watersensor base value
base [base] store watersensor base value
boil heat till 100°C
calibrate calibrates watersensor
celsius use celsius °C [console only]
fahrenheid use fahrenheid °F [console only]
formula (temperature (keepwarm))] heat kettle in formula mode
heat (temperature)(keepwarm)) heat kettle
kettlecoffee warms water for coffee 95°C
milk warm 65°C
settings [temperature] [keepwarm] [formula] [formulatemperature] store kettle user settings
tea [green,white,oelong,black] warms water for tea 65°C,80°C,90°C,100°C
Smarter Coffee Commands
beans use beans for coffee
brew (cups (hotplate (grind (strength)))) brew coffee
brew default brew coffee with stored user default settings
carafe returns if carafe is required
carafe [state] set carafe is required [true or false]
cups [number] set number of cups [1..12]
descale descale coffee machine
filter use pregrind beans in filter for coffee
hotplate off turn hotplate off
hotplate on (minutes) turn hotplate on (time in minutes)
mode return which mode: cup or carafe mode
mode [mode] set mode: [cup] or [carafe] mode
pregrind use pregrind beans in filter for coffee
(strength) [strength] set strength coffee [weak, medium or strong]
settings [cups] [hotplate] [grind] [strength] store user settings
Wireless Network Commands
direct enable direct mode access
join [net] (pass) connect to wireless network
rejoin rejoins current wireless network [not in direct mode]
scan scan wireless networks
Smarter Network Commands
connect (host) (rules&modifiers) connect to appliance
block [rules] block messages with groups or ids
disconnect disconnect connected appliance
events start trigger events only
patch [rules] patch messages
relay ((ip:)port) start relay
relay stop stop relay
remote info info on remote relay
remote block [rules] remote block messages with groups or ids
remote patch [rules] remote patch
remote rules (full) show remote blocking and patching rules
remote unblock [rules] remote unblock messages groups or ids
rules (full) show blocking & patching rules
stats show traffic statistics
unblock [rules] unblock messages groups or ids
Block Rules
Consists of rules, in: is for outgoing connection to the appliance, out: is for incomming connection from relay client.
[in:|out:]rule(,[in:|out:]RULE)*
RULE
message id
group name
Patch Rules
Patches additional functionality
[mod:]VAR=VALUE(,[mod:]VAR=VALUE)*
VAR VALUE
temperaturelimit STATE or [0..100] kettle can not heat above VALUE degrees
childprotection STATE kettle can not heat above 45 degrees
Triggers
trigger add [group] [trigger] [action] add trigger to a group
trigger delete [group] (trigger) delete trigger or group triggers
trigger groups show list of groups
trigger [group] show triggers of group
trigger show all triggers
trigger [group] [bool] enabled/disable trigger group
trigger [group] state [bool] set group state output
Actions can either be a path to a command or url
Trigger actions examples:
C:\SCRIPTS\SENSOR.BAT §O §N
/home/pi/iBrew/scripts/smarthome.sh Temperature §O §N
http://smarthome.local/?idx=34&value=§N
Debug Commands
time [time] set the appliance time
firmware show firmware Wifi
history action history
[hexdata] send raw data to appliance (e.g. '64 7e')
dump toggle 'dump raw messages'
monitor monitor incomming traffic
simulate start kettle (or coffee simulation)
sweep (id) [developer only] try (all or start with id) unknown command codes
Help Commands
examples show examples of commands
groups show all message groups
group show messages in group
messages show all known protocol messages
message [id] show protocol message detail of message [id]
notes show developer notes on the appliances
protocol show all protocol information available
states show various forms of trigger states
structure show protocol structure information
triggers show triggers
iBrew Commands
console (rules) (modifiers) start console [command line only]
joke show joke
license show license
quit quit console [console only]
Alternativly you can run a console to test out the commands. start the console with the command
ibrew console 10.0.0.99.
Example command line:
ibrew shout 21 30 05 7e Send kettle raw heat without waiting for reply
ibrew weak 10.0.0.1 Set coffee strength to weak
ibrew strength weak Set coffee strength to weak but do not toggle filter/beans
ibrew dump coffee relay out:GOD,in:32 Simulates Smarter Coffee machine
ibrew dump kettle relay out:GOD,in:14 Simulates iKettle 2.0
Example console:
off Stop heating/brewing
messages Show all protocol messages
message 3e Show protocol message 3a, turn hotplate on
167E Send kettle raw stop
21 30 05 7e Send kettle raw heat
weak Set coffee strength to weak
strength weak Set coffee strength to weak but do not toggle filter/beans
cups 3 Set number of cups to brew
mode cup Set cup mode
block in:wifi,in:02 Block wifi and [Set appliance time] command to appliance
brew 4 10 beans strong Brew 4 cups of strong coffee using the beans keeping the hotplate on for 10 minutes
join MyWifi p@ssw0rd Joins MyWifi wireless network using p@ssw0rd as credential
settings 100 20 On 75 Set default user settings for the kettle to...
Start a relay server on port 2081, it acts as an man in the middle passing messages between the appliance and the clients like the Smarter app or another iBrew instances. It can be configured to block and/or modify/patch certain messages. And as there is only one connection needed to the appliances. Good riddense of the annoying beep when the wireless network disconnects due to overload of connections. Also statistics are now possible.
Advantages
- No annoying beep. Only one connection to the appliance needed
- A lot faster!
- History and statistics possible!
- Works with Smarter app!
- Works with iBrew as client!?
- Message blocking
- Message patching
ibrew relay 10.0.0.99
ibrew dump relay in:DEBUG,out:DEBUG 10.0.0.99 127.0.0.1:3081
Bind relay server to localhost on a different port and uses the firewall to block all debug messages
To change the firewall rules of a relay server already running, use
ibrew remote unblock in:ADMIN,out:ADMIN 127.0.0.1:3081
ibrew remote block in:DEBUG,out:DEBUG 127.0.0.1:3081
To see the rules use
ibrew remote rules 127.0.0.1:3081
You can block messages either in (from the appliance) or out (from the relay), this can be usefull to disable calibration or other options like wifi and is internally used to speed things up :-)
ibrew rules 10.0.0.99
ibrew unblock in:ADMIN,out:ADMIN 10.0.0.99
ibrew block in:DEBUG,out:DEBUG 10.0.0.99
- Simulates iKettle 2.0
ibrew coffee simulate - Simulates Smarter Coffee machine
ibrew kettle simulate
You can use to dump action to see more info what is going on.
Note that message blocking is disabled!
You can add triggers by replacing the host (ip) with the word simulation and start it with the evens system enabled, if you want to try out triggers...
ibrew trigger add Domoticz Temperature "http://127.0.0.1:8080/json.htm?type=command¶m=udevice&idx=155&nvalue=0&svalue=§N" simulation
ibrew events kettle simulate
This is a build in progress, please contribute!
Start the web interface
ibrew web
and surf to:
http://ip:port/
Yeah I know the start and stop icons look terrible... and it is partly functional but you get no visual indicator it worked. Work in progress!
For bridging smarthome controllers or use it to integrate your appliance in your own website!
You can setup your appliance without the Smarter app. Default settings, calibration, descaling or wifi setup... it does it all! No internet required. This means you can use and setup the kettle and the smarter coffee even if smarters servers disappears (chance of no smarter servers in 5 years 97%, I seen it before :-/)
It keeps stats for you, and you only! It does NOT send them (or anything else) to Smarter like the Smarter app does and definitly not to me... Keep your appliance usage to yourself, will you!
Cuz my code... :-)
You can find information on the iBrew JSON REST API in the Web Interface under:
http://ip:port/info/api
The default port is 2080
http://localhost:2080/api/10.0.0.99/status
{"device": {"directmode": false, "connected": true, "host": "10.0.0.99", "firmware": {"version": 19, "certified": "iBrew certified firmware"}, "type": {"desciption": "iKettle 2.0", "id": 1}}, "default": {"formula": {"use": false, "temperature": {"fahrenheid": 32, "celsius": 0}}, "keepwarm": 0, "temperature": {"fahrenheid": 212, "celsius": 100, "prefered": "celsius"}}, "sensors": {"status": "ready", "base": "On", "temperature": {"raw": {"fahrenheid": 68, "celsius": 20}, "stable": {"fahrenheid": 68, "celsius": 20}}, "waterlevel": {"raw": 2005, "base": 920, "stable": 2004}}}
Work in progress! Help would be nice!
JavaScript for use with iBrew JSON REST API Javascript iBrew interface
Python 2.7 only!
The Python Smarter Interface to the iKettle 2.0 and the Smarter Coffee is located in the Smarter folder. Use pydoc or any other python doc app to see the help on SmarterInterface.py and SmarterProtocol.py. There are a lot of options and functions you can use!
from smarter.SmarterInterface import *
from smarter.SmarterProtocol import *
appliance = SmarterClient()
appliance.setHost("10.0.0.99")
appliance.connect()
if appliance.isKettle() and not appliance.heaterOn:
appliance.kettle_heat_default()
appliance.disconnect()
You can pull values and states with the JSON REST api with it also possible to push values and state with the trigger events system.
To add
ibrew trigger add Domoticz Temperature "http://127.0.0.1:8080/json.htm?type=command¶m=udevice&idx=155&nvalue=0&svalue=§N" 10.0.0.99
ibrew trigger add Scripts KettleBusy "C:\SCRIPTS\SENSOR.BAT §N" 10.0.0.99
ibrew trigger add Scripts KettleBusy "/home/pi/iBrew/scripts/sensor.sh §O §N" 10.0.0.99
where Domoticz is the group (one action per trigger per group) and §N is the new value and §O is the old value.
To see all triggers
ibrew triggers
To see all active triggers
ibrew trigger
monitor the trigger event system
ibrew dump events 10.0.0.99
or use the web server with auto re-connect :-)
ibrew dump events web
If you run the webserver as daemon/service add sudo to all your ibrew commands such that the right config file gets updated!
So instead of ibrew trigger Domoticz state On 10.0.0.99 run sudo ibrew trigger Domoticz state On 10.0.0.99
It is possible to set boolean type to various formats (on/off, 1/0, enabled/disabled,...)
ibrew trigger Domoticz state on
See ibrew states for an overview
And enable disable entire groups
ibrew trigger Domoticz off
See for group overview
ibrew trigger groups
Alpha!
Lets set up a kettle temperature sensor and a on base sensor!
For this example the base url of domoticz is
http://127.0.0.1:8080/
The IP of the kettle is 10.0.0.99
Lets start!
Go to Setup -> Hardware and create a new dummy hardware called Smarter
Click on Create Virtual Sensors
Create a temperature sensor
Go to Setup -> Devices and look up your new sensor.
Use the idx of the sensor to add a trigger
ibrew trigger add Domoticz Temperature "http://127.0.0.1:8080/json.htm?type=command¶m=udevice&idx=155&nvalue=0&svalue=§N" 10.0.0.99
Now we also add an on base motion sensor
Go to Switches and look up your new sensor.
Edit it!
Select motion
Look up the idx in Setup -> Devices
Use the idx of the sensor to add a trigger
ibrew trigger add Domoticz OnBase "http://127.0.0.1:8080/json.htm?type=command¶m=switchlight&idx=99&switchcmd=§N" 10.0.0.99
We need to set up the right boolean state, domoticz uses the format On or Off
ibrew trigger Domoticz state On 10.0.0.99
start any server with the events enables like
ibrew dump events web
If you run the webserver as daemon/service add sudo to all your ibrew commands such that the right config file gets updated!
So instead of ibrew trigger Domoticz state On 10.0.0.99 run sudo ibrew trigger Domoticz state On 10.0.0.99
To see it in action!
For more information on JSON used by domoticz!
Next step is creating and filling in buttons actions using either script:// or iBrew JSON Rest API!...
HomeKit ~ HomeBridge
Yes, you can! Connect your iKettle or Smarter Coffee to HomeKit... just follow the following steps!
Install the following software to bridge iBrew with HomeKit
Part of config file relevant to iKettle, iKettle 2.0 or Smarter Coffee
Fill in your own device host (either IP address or hostname) and location to iBrew,
- If you use an IP address: PLEASE use a static IP address! (assign in your router)
- If you are the lucky owner of a router that assigns dynamic IP addresses with hostnames attached (usually in the form of device.local or device.lan) you can use that. If you are lucky, else use a static IP.
- If you only have ONE device: you can use autodetection (and leave out the ip or hostname) but it adds a 2 seconds time penalty.
"platforms": [{
"platform": "cmdSwitch2",
"switches": [{
"name": "iKettle",
"on_cmd": "/Users/Tristan/Coding/iBrew/ibrew legacy heat 10.0.0.3",
"off_cmd": "/Users/Tristan/Coding/iBrew/ibrew legacy stop 10.0.0.3",
"state_cmd": "/Users/Tristan/Coding/iBrew/ibrew legacy status 10.0.0.3 | grep 'Heating'"
"manufacturer": "iBrew",
"model": "iBrew iKettle",
"serial": "44DE1AD79BC",
"polling": true,
"interval": 1,
}]
"platforms": [{
"platform": "cmdSwitch2",
"switches": [{
"name": "iKettle 2.0",
"on_cmd": "/Users/Tristan/Coding/iBrew/ibrew start 10.0.0.99",
"off_cmd": "/Users/Tristan/Coding/iBrew/ibrew stop 10.0.0.99",
"state_cmd": "/Users/Tristan/Coding/iBrew/ibrew status 10.0.0.99 | grep 'busy'",
"manufacturer": "iBrew",
"model": "iBrew iKettle 2.0",
"serial": "44DE2AD79BC",
"polling": true,
"interval": 1
}]
"platforms": [{
"platform": "cmdSwitch2",
"switches": [{
"name": "Smarter Coffee",
"on_cmd": "/Users/Tristan/Coding/iBrew/ibrew start 10.0.0.89",
"off_cmd": "/Users/Tristan/Coding/iBrew/ibrew stop 10.0.0.89",
"state_cmd": "/Users/Tristan/Coding/iBrew/ibrew status 10.0.0.89 | grep 'busy'",
"manufacturer": "iBrew",
"model": "iBrew Smarter Coffee",
"serial": "44DE3AD79BC",
"polling": true,
"interval": 1
}]
If you do not use any other HomeBridge devices, you can use and alter the following example config file for iKettle 2.0.
{
"bridge": {
"name": "Homebridge",
"username": "CC:22:3D:E3:CE:30",
"port": 51826,
"pin": "031-45-154"
},
"description": "Homebridge",
"platforms": [{
"platform": "cmdSwitch2",
"switches": [{
"name": "iKettle 2.0",
"on_cmd": "/Users/Tristan/Coding/iBrew/ibrew start 10.0.0.99",
"off_cmd": "/Users/Tristan/Coding/iBrew/ibrew stop 10.0.0.99",
"state_cmd": "/Users/Tristan/Coding/iBrew/ibrew status 10.0.0.99 | grep 'busy'",
"manufacturer": "iBrew",
"model": "iKettle 2.0 Intermezzo",
"serial": "44DE2AD79BC",
"polling": true,
"interval": 1
}]
}]
}
configuration.yaml:
switch:
- platform: command_line
switches:
my_kettle:
command_on: "/home/hass/ibrewcontrol.sh start"
command_off: "/home/hass/ibrewcontrol.sh stop"
command_state: "/home/hass/ibrewstatus.sh"
friendly_name: Kettle
ibrewcontrol.sh
#!/bin/bash
COMMAND=$1
ibrew $COMMAND <your Kettle IP>
ibrewstatus.sh
#!/bin/bash
CMD=`ibrew status <your kettle IP> |grep busy`
if [ -z "$CMD" ];then
exit 1
else
exit 0
fi
Have any links, info or help on other Smarthome controller software, please post in the issues!
- PHASE 1: [BRAINSTORMING] v0.0 Bean Grinder Pack
- PHASE 2: [PROTOTYPE] v0.1 White Tealeaf Edition
- PHASE 3: [PROTOCOL] v0.2 Tea Noire Sweet
- PHASE 4: [CONSOLE] v0.3 Kettle Rattle
- PHASE 5: [WEB] v0.4 Brewing on the 7th day
-
[CORE] v0.4.4 Intermezzo! - PHASE 6: [PRERELEASE] v0.5 The conundrum struggle
- PHASE 7: [FINALCUT] v1.0 Out of order!
- PHASE 8: [BUGS] v1.1 Ant trail!
Protocol
- PROTOCOL: History message is not finished
- PROTOCOL: Modifiers/patches!!!
- PROCOCOL: Time arguments (have not figured that out)
- IKETTLE20: Fahrenheid not finished, please to not use.
- IKETTLE20: Watersensor to something usefull (like the stupid left or right side handle, cuz the kettle weight balance is off, its inaccurate as fuck even in the smarter app :-/)
- SMARTER COFFEE: Have not looked at single cup... needs a remote coffee machine session ;-)
- SMARTER COFFEE: Did I accidently switch carafe required bit?
- SMARTER COFFEE: Cups from the status and cups from the display setting is different
- SMARTER COFFEE: Timers protocol
- SMARTER COFFEE: v0.5 Missing Coffee Smarter codes (working bit only?)
- SMARTER COFFEE: Descaling data bit? (the smarter app has it...)
- HELP: Add the missing pieces
- SIMULATOR: Add carafe removal and water filling
- SIMULATOR: Fix waterlevel and fix cups?
Interfaces
- PYTHON: Better error handling
- PYTHON: Make the print stuff more general
- PYTHON: Strip zero from ip
- PYTHON: fix wireless with the same name
- PYTHON: filter out wrong responses... of know commands??? or atleast acknowledge them, (03 responses)
- PYTHON: Beverages should be able to override keepwarm time... xCLI/REST
- WEB: Web interface
- WEB: Auto relay when in web mode
- WEB: API key, login
- WEB: Settings iBrew (like blocking, patches, other stuff)
- WEB: All REST api has no error check...
- JAVASCRIPT: JSON Rest API
- ME: hugs!
The author has no contact with or support from Smarter, and is not affiliated in any way with the company that produces the appliances.
Copyright (c) 2016, Tristan Crispijn All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
-
Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
-
Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
-
You may not use source, binary forms or derivative work, with or without modification, for commercial purposes.
-
Written consent of the iBrew creator Tristan Crispijn with original authentic signature on paper.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. YOU AGREE TO NOT USE THIS SOFTWARE IN ANY WAY. SMARTER EMPLOYEES OR SMARTER AFFILIATED PEOPLE ARE NOT ALLOWED TO USE THIS SOFTWARE OR DERIVATIVE WORK. YOU AGREE THAT THE SOFTWARE CAN MONITOR THE USAGE OF THE SOFTWARE ITSELF AND OR THE APPLIANCES ATTACHED TO THE SOFTWARE, AND SEND IT BACK TO A MONITOR SERVER FOR BETTER SUPPORT. ENJOY!