Skip to content
Permalink
master
Switch branches/tags
Go to file
 
 
Cannot retrieve contributors at this time
//- -----------------------------------------------------------------------------------------------------------------------
// AskSin++
// 2016-10-31 papa Creative Commons - http://creativecommons.org/licenses/by-nc-sa/3.0/de/
//- -----------------------------------------------------------------------------------------------------------------------
// ci-test=yes board=328p aes=no
// define this to read the device id, serial and device type from bootloader section
// #define USE_OTA_BOOTLOADER
#define EI_NOTEXTERNAL
#include <EnableInterrupt.h>
#include <AskSinPP.h>
#include <LowPower.h>
#include <Register.h>
#include <ContactState.h>
// we use a Pro Mini
// Arduino pin for the LED
// D4 == PIN 4 on Pro Mini
#define LED1_PIN 4
#define LED2_PIN 5
// Arduino pin for the config button
// B0 == PIN 8 on Pro Mini
#define CONFIG_BUTTON_PIN 8
#define SENS_PIN 9
#define SENS_EN_PIN 6
#define SENS_EN_WAIT 50 //millis to wait after enable pin = high
#define SABOTAGE_PIN 7
// number of available peers per channel
#define PEERS_PER_CHANNEL 10
#define CYCLETIME seconds2ticks(60UL * 60 * 1)
// all library classes are placed in the namespace 'as'
using namespace as;
// define all device properties
const struct DeviceInfo PROGMEM devinfo = {
{0x03,0xc7,0x01}, // Device ID
"JPSCO00001", // Device Serial
{0x00,0xC7}, // Device Model
0x06, // Firmware Version
as::DeviceType::ThreeStateSensor, // Device Type
{0x01,0x00} // Info Bytes
};
/**
* Configure the used hardware
*/
typedef AvrSPI<10,11,12,13> SPIType;
typedef Radio<SPIType,2> RadioType;
typedef DualStatusLed<LED2_PIN,LED1_PIN> LedType;
typedef AskSin<LedType,IrqInternalBatt,RadioType> BaseHal;
class Hal : public BaseHal {
public:
void init (const HMID& id) {
BaseHal::init(id);
// measure battery every 1h
battery.init(seconds2ticks(60UL*60),sysclock);
}
} hal;
DEFREGISTER(Reg0,DREG_INTKEY,DREG_CYCLICINFOMSG,MASTERID_REGS,DREG_TRANSMITTRYMAX,DREG_SABOTAGEMSG)
class SCOList0 : public RegList0<Reg0> {
public:
SCOList0(uint16_t addr) : RegList0<Reg0>(addr) {}
void defaults () {
clear();
cycleInfoMsg(true);
transmitDevTryMax(6);
sabotageMsg(true);
}
};
DEFREGISTER(Reg1,CREG_AES_ACTIVE,CREG_MSGFORPOS,CREG_EVENTDELAYTIME,CREG_LEDONTIME,CREG_TRANSMITTRYMAX)
class SCOList1 : public RegList1<Reg1> {
public:
SCOList1 (uint16_t addr) : RegList1<Reg1>(addr) {}
void defaults () {
clear();
msgForPosA(1); // CLOSED
msgForPosB(2); // OPEN
aesActive(false);
eventDelaytime(0);
ledOntime(100);
transmitTryMax(6);
}
};
typedef TwoStateChannel<Hal,SCOList0,SCOList1,DefList4,PEERS_PER_CHANNEL, SENS_EN_WAIT> ChannelType;
typedef StateDevice<Hal,ChannelType,1,SCOList0, CYCLETIME> SCOType;
SCOType sdev(devinfo,0x20);
ConfigButton<SCOType> cfgBtn(sdev);
void setup () {
DINIT(57600,ASKSIN_PLUS_PLUS_IDENTIFIER);
sdev.init(hal);
buttonISR(cfgBtn,CONFIG_BUTTON_PIN);
sdev.channel(1).init(SENS_PIN, SENS_EN_PIN, SABOTAGE_PIN);
while (hal.battery.current() == 0);
sdev.initDone();
}
void loop() {
bool worked = hal.runready();
bool poll = sdev.pollRadio();
if( worked == false && poll == false ) {
// deep discharge protection
// if we drop below critical battery level - switch off all and sleep forever
if( hal.battery.critical() ) {
// this call will never return
hal.activity.sleepForever(hal);
}
// if nothing to do - go sleep
hal.activity.savePower<Sleep<> >(hal);
}
}