Skip to content
Switch branches/tags
Go to file
Cannot retrieve contributors at this time
;; -*- mode: emacs-lisp; lexical-binding: t -*-
;; This file is loaded by Spacemacs at startup.
;; It must be stored in your home directory.
(defun dotspacemacs/layers ()
"Layer configuration:
This function should only modify configuration layer settings."
;; Base distribution to use. This is a layer contained in the directory
;; `+distribution'. For now available distributions are `spacemacs-base'
;; or `spacemacs'. (default 'spacemacs)
dotspacemacs-distribution 'spacemacs
;; Lazy installation of layers (i.e. layers are installed only when a file
;; with a supported type is opened). Possible values are `all', `unused'
;; and `nil'. `unused' will lazy install only unused layers (i.e. layers
;; not listed in variable `dotspacemacs-configuration-layers'), `all' will
;; lazy install any layer that support lazy installation even the layers
;; listed in `dotspacemacs-configuration-layers'. `nil' disable the lazy
;; installation feature and you have to explicitly list a layer in the
;; variable `dotspacemacs-configuration-layers' to install it.
;; (default 'unused)
dotspacemacs-enable-lazy-installation 'unused
;; If non-nil then Spacemacs will ask for confirmation before installing
;; a layer lazily. (default t)
dotspacemacs-ask-for-lazy-installation t
;; If non-nil layers with lazy install support are lazy installed.
;; List of additional paths where to look for configuration layers.
;; Paths must have a trailing slash (i.e. `~/.mycontribs/')
dotspacemacs-configuration-layer-path '()
;; List of configuration layers to load.
(auto-completion :variables
auto-completion-return-key-behavior nil
auto-completion-tab-key-behavior 'complete
auto-completion-use-company-box t
auto-completion-enable-sort-by-usage t
spacemacs-default-company-backends '(company-files company-capf))
;; NOTE disabled till dap-mode error is resolved
;; (c-c++ :variables
;; c-c++-backend 'lsp-ccls
;; c-c++-enable-clang-format-on-save t
;; c-c++-default-mode-for-headers 'c++-mode)
(elixir :variables
elixir-backend 'alchemist)
(go :variables
go-backend 'lsp
go-format-before-save t
godoc-at-point-function 'godoc-gogetdoc
go-use-test-args "-race -timeout 10s")
(html :variables
web-fmt-tool 'web-beautify)
(javascript :variables
javascript-backend 'lsp
javascript-fmt-tool 'web-beautify
js2-basic-offset 2
js-indent-level 2
node-add-modules-path t)
(json :variables
json-fmt-tool 'web-beautify)
(python :variables
python-test-runner 'pytest)
(ruby :variables
ruby-backend 'lsp
ruby-test-runner 'rspec
ruby-version-manager 'rbenv)
;; osx
;; multiple-cursors
(neotree :variables
neo-auto-indent-point t
neo-show-hidden-files nil
neo-theme 'icons)
(shell :variables
shell-default-shell 'vterm ; requires --with-modules support
shell-default-height 30
shell-default-position 'bottom)
;; spell-checking
(unicode-fonts :variables
unicode-fonts-force-multi-color-on-mac t)
(typescript :variables
typescript-backend 'lsp
typescript-fmt-on-save t)
;; List of additional packages that will be installed without being
;; wrapped in a layer. If you need some configuration for these
;; packages, then consider creating a layer. You can also put the
;; configuration in `dotspacemacs/user-config'.
;; To use a local version of a package, use the `:location' property:
;; '(your-package :location "~/path/to/your-package/")
;; Also include the dependencies as they will not be resolved automatically.
dotspacemacs-additional-packages '(direnv
;; A list of packages that cannot be updated.
dotspacemacs-frozen-packages '()
;; A list of packages that will not be installed and loaded.
dotspacemacs-excluded-packages '(anzu-mode evil-anzu)
;; Defines the behaviour of Spacemacs when installing packages.
;; Possible values are `used-only', `used-but-keep-unused' and `all'.
;; `used-only' installs only explicitly used packages and deletes any unused
;; packages as well as their unused dependencies. `used-but-keep-unused'
;; installs only the used packages but won't delete unused ones. `all'
;; installs *all* packages supported by Spacemacs and never uninstalls them.
;; (default is `used-only')
dotspacemacs-install-packages 'used-only))
(defun dotspacemacs/init ()
This function is called at the very beginning of Spacemacs startup,
before layer configuration.
It should only modify the values of Spacemacs settings."
;; This setq-default sexp is an exhaustive list of all the supported
;; spacemacs settings.
;; If non-nil then enable support for the portable dumper. You'll need
;; to compile Emacs 27 from source following the instructions in file
;; at to root of the git repository.
;; (default nil)
dotspacemacs-enable-emacs-pdumper nil
;; Name of executable file pointing to emacs 27+. This executable must be
;; in your PATH.
;; (default "emacs")
dotspacemacs-emacs-pdumper-executable-file "emacs"
;; Name of the Spacemacs dump file. This is the file will be created by the
;; portable dumper in the cache directory under dumps sub-directory.
;; To load it when starting Emacs add the parameter `--dump-file'
;; when invoking Emacs 27.1 executable on the command line, for instance:
;; ./emacs --dump-file=$HOME/.emacs.d/.cache/dumps/spacemacs-27.1.pdmp
;; (default (format "spacemacs-%s.pdmp" emacs-version))
dotspacemacs-emacs-dumper-dump-file (format "spacemacs-%s.pdmp" emacs-version)
;; If non-nil ELPA repositories are contacted via HTTPS whenever it's
;; possible. Set it to nil if you have no way to use HTTPS in your
;; environment, otherwise it is strongly recommended to let it set to t.
;; This variable has no effect if Emacs is launched with the parameter
;; `--insecure' which forces the value of this variable to nil.
;; (default t)
dotspacemacs-elpa-https t
;; Maximum allowed time in seconds to contact an ELPA repository.
;; (default 5)
dotspacemacs-elpa-timeout 5
;; Set `gc-cons-threshold' and `gc-cons-percentage' when startup finishes.
;; This is an advanced option and should not be changed unless you suspect
;; performance issues due to garbage collection operations.
;; (default '(100000000 0.1))
dotspacemacs-gc-cons '(100000000 0.1)
;; Set `read-process-output-max' when startup finishes.
;; This defines how much data is read from a foreign process.
;; Setting this >= 1 MB should increase performance for lsp servers
;; in emacs 27.
;; (default (* 1024 1024))
dotspacemacs-read-process-output-max (* 1024 1024)
;; If non-nil then Spacelpa repository is the primary source to install
;; a locked version of packages. If nil then Spacemacs will install the
;; latest version of packages from MELPA. Spacelpa is currently in
;; experimental state please use only for testing purposes.
;; (default nil)
dotspacemacs-use-spacelpa nil
;; If non-nil then verify the signature for downloaded Spacelpa archives.
;; (default t)
dotspacemacs-verify-spacelpa-archives t
;; If non-nil then spacemacs will check for updates at startup
;; when the current branch is not `develop'. Note that checking for
;; new versions works via git commands, thus it calls GitHub services
;; whenever you start Emacs. (default nil)
dotspacemacs-check-for-update nil
;; If non-nil, a form that evaluates to a package directory. For example, to
;; use different package directories for different Emacs versions, set this
;; to `emacs-version'. (default 'emacs-version)
dotspacemacs-elpa-subdirectory 'emacs-version
;; One of `vim', `emacs' or `hybrid'.
;; `hybrid' is like `vim' except that `insert state' is replaced by the
;; `hybrid state' with `emacs' key bindings. The value can also be a list
;; with `:variables' keyword (similar to layers). Check the editing styles
;; section of the documentation for details on available variables.
;; (default 'vim)
dotspacemacs-editing-style 'vim
;; If non-nil show the version string in the Spacemacs buffer. It will
;; appear as (spacemacs version)@(emacs version)
;; (default t)
dotspacemacs-startup-buffer-show-version t
;; Specify the startup banner. Default value is `official', it displays
;; the official spacemacs logo. An integer value is the index of text
;; banner, `random' chooses a random text banner in `core/banners'
;; directory. A string value must be a path to an image format supported
;; by your Emacs build.
;; If the value is nil then no banner is displayed. (default 'official)
dotspacemacs-startup-banner 'official
;; List of items to show in startup buffer or an association list of
;; the form `(list-type . list-size)`. If nil then it is disabled.
;; Possible values for list-type are:
;; `recents' `bookmarks' `projects' `agenda' `todos' 'agenda' 'todos'.
;; List sizes may be nil, in which case
;; `spacemacs-buffer-startup-lists-length' takes effect.
;; The exceptional case is `recents-by-project', where list-type must be a
;; pair of numbers, e.g. `(recents-by-project . (7 . 5))', where the first
;; number is the project limit and the second the limit on the recent files
;; within a project.
dotspacemacs-startup-lists '()
;; True if the home buffer should respond to resize events. (default t)
dotspacemacs-startup-buffer-responsive t
;; Show numbers before the startup list lines. (default t)
dotspacemacs-show-startup-list-numbers t
;; The minimum delay in seconds between number key presses. (default 0.4)
dotspacemacs-startup-buffer-multi-digit-delay 0.4
;; Default major mode for a new empty buffer. Possible values are mode
;; names such as `text-mode'; and `nil' to use Fundamental mode.
;; (default `text-mode')
dotspacemacs-new-empty-buffer-major-mode 'text-mode
;; Default major mode of the scratch buffer (default `text-mode')
dotspacemacs-scratch-mode 'text-mode
;; If non-nil, *scratch* buffer will be persistent. Things you write down in
;; *scratch* buffer will be saved and restored automatically.
dotspacemacs-scratch-buffer-persistent nil
;; If non-nil, `kill-buffer' on *scratch* buffer
;; will bury it instead of killing.
dotspacemacs-scratch-buffer-unkillable nil
;; Initial message in the scratch buffer, such as "Welcome to Spacemacs!"
;; (default nil)
dotspacemacs-initial-scratch-message nil
;; List of themes, the first of the list is loaded when spacemacs starts.
;; Press `SPC T n' to cycle to the next theme in the list (works great
;; with 2 themes variants, one dark and one light)
dotspacemacs-themes '(base16-oceanicnext
;; Set the theme for the Spaceline. Supported themes are `spacemacs',
;; `all-the-icons', `custom', `doom', `vim-powerline' and `vanilla'. The
;; first three are spaceline themes. `doom' is the doom-emacs mode-line.
;; `vanilla' is default Emacs mode-line. `custom' is a user defined themes,
;; refer to the for more info on how to create your own
;; spaceline theme. Value can be a symbol or list with additional properties.
;; (default '(spacemacs :separator wave :separator-scale 1.5))
dotspacemacs-mode-line-theme '(spacemacs :separator wave :separator-scale 1.5)
;; If non-nil the cursor color matches the state color in GUI Emacs.
;; (default t)
dotspacemacs-colorize-cursor-according-to-state t
;; Default font or prioritized list of fonts. The `:size' can be specified as
;; a non-negative integer (pixel size), or a floating-point (point size).
;; Point size is recommended, because it's device independent. (default 10.0)
dotspacemacs-default-font `("Cascadia Code"
:size ,(when (spacemacs/system-is-mac) 13 13)
:weight ,(when (spacemacs/system-is-mac) 'normal 'medium))
;; The leader key (default "SPC")
dotspacemacs-leader-key "SPC"
;; The key used for Emacs commands `M-x' (after pressing on the leader key).
;; (default "SPC")
dotspacemacs-emacs-command-key "SPC"
;; The key used for Vim Ex commands (default ":")
dotspacemacs-ex-command-key ":"
;; The leader key accessible in `emacs state' and `insert state'
;; (default "M-m")
dotspacemacs-emacs-leader-key "M-m"
;; Major mode leader key is a shortcut key which is the equivalent of
;; pressing `<leader> m`. Set it to `nil` to disable it. (default ",")
dotspacemacs-major-mode-leader-key ","
;; Major mode leader key accessible in `emacs state' and `insert state'.
;; (default "C-M-m" for terminal mode, "<M-return>" for GUI mode).
;; Thus M-RET should work as leader key in both GUI and terminal modes.
;; C-M-m also should work in terminal mode, but not in GUI mode.
dotspacemacs-major-mode-emacs-leader-key (if window-system "<M-return>" "C-M-m")
;; These variables control whether separate commands are bound in the GUI to
;; the key pairs `C-i', `TAB' and `C-m', `RET'.
;; Setting it to a non-nil value, allows for separate commands under `C-i'
;; and TAB or `C-m' and `RET'.
;; In the terminal, these pairs are generally indistinguishable, so this only
;; works in the GUI. (default nil)
dotspacemacs-distinguish-gui-tab nil
;; Name of the default layout (default "Default")
dotspacemacs-default-layout-name "Default"
;; If non-nil the default layout name is displayed in the mode-line.
;; (default nil)
dotspacemacs-display-default-layout nil
;; If non-nil then the last auto saved layouts are resumed automatically upon
;; start. (default nil)
dotspacemacs-auto-resume-layouts nil
;; If non-nil, auto-generate layout name when creating new layouts. Only has
;; effect when using the "jump to layout by number" commands. (default nil)
dotspacemacs-auto-generate-layout-names nil
;; Size (in MB) above which spacemacs will prompt to open the large file
;; literally to avoid performance issues. Opening a file literally means that
;; no major mode or minor modes are active. (default is 1)
dotspacemacs-large-file-size 1
;; Location where to auto-save files. Possible values are `original' to
;; auto-save the file in-place, `cache' to auto-save the file to another
;; file stored in the cache directory and `nil' to disable auto-saving.
;; (default 'cache)
dotspacemacs-auto-save-file-location 'cache
;; Maximum number of rollback slots to keep in the cache. (default 5)
dotspacemacs-max-rollback-slots 5
;; If non-nil, the paste transient-state is enabled. While enabled, after you
;; paste something, pressing `C-j' and `C-k' several times cycles through the
;; elements in the `kill-ring'. (default nil)
dotspacemacs-enable-paste-transient-state nil
;; Which-key delay in seconds. The which-key buffer is the popup listing
;; the commands bound to the current keystroke sequence. (default 0.4)
dotspacemacs-which-key-delay 0.4
;; Which-key frame position. Possible values are `right', `bottom' and
;; `right-then-bottom'. right-then-bottom tries to display the frame to the
;; right; if there is insufficient space it displays it at the bottom.
;; (default 'bottom)
dotspacemacs-which-key-position 'bottom
;; Control where `switch-to-buffer' displays the buffer. If nil,
;; `switch-to-buffer' displays the buffer in the current window even if
;; another same-purpose window is available. If non-nil, `switch-to-buffer'
;; displays the buffer in a same-purpose window even if the buffer can be
;; displayed in the current window. (default nil)
dotspacemacs-switch-to-buffer-prefers-purpose nil
;; If non-nil a progress bar is displayed when spacemacs is loading. This
;; may increase the boot time on some systems and emacs builds, set it to
;; nil to boost the loading time. (default t)
dotspacemacs-loading-progress-bar nil
;; If non-nil the frame is fullscreen when Emacs starts up. (default nil)
;; (Emacs 24.4+ only)
dotspacemacs-fullscreen-at-startup nil
;; If non-nil `spacemacs/toggle-fullscreen' will not use native fullscreen.
;; Use to disable fullscreen animations in OSX. (default nil)
dotspacemacs-fullscreen-use-non-native nil
;; If non-nil the frame is maximized when Emacs starts up.
;; Takes effect only if `dotspacemacs-fullscreen-at-startup' is nil.
;; (default nil) (Emacs 24.4+ only)
dotspacemacs-maximized-at-startup nil
;; If non-nil the frame is undecorated when Emacs starts up. Combine this
;; variable with `dotspacemacs-maximized-at-startup' in OSX to obtain
;; borderless fullscreen. (default nil)
dotspacemacs-undecorated-at-startup nil
;; A value from the range (0..100), in increasing opacity, which describes
;; the transparency level of a frame when it's active or selected.
;; Transparency can be toggled through `toggle-transparency'. (default 90)
dotspacemacs-active-transparency 90
;; A value from the range (0..100), in increasing opacity, which describes
;; the transparency level of a frame when it's inactive or deselected.
;; Transparency can be toggled through `toggle-transparency'. (default 90)
dotspacemacs-inactive-transparency 90
;; If non-nil show the titles of transient states. (default t)
dotspacemacs-show-transient-state-title t
;; If non-nil show the color guide hint for transient state keys. (default t)
dotspacemacs-show-transient-state-color-guide t
;; If non-nil unicode symbols are displayed in the mode line.
;; If you use Emacs as a daemon and wants unicode characters only in GUI set
;; the value to quoted `display-graphic-p'. (default t)
dotspacemacs-mode-line-unicode-symbols t
;; If non-nil smooth scrolling (native-scrolling) is enabled. Smooth
;; scrolling overrides the default behavior of Emacs which recenters point
;; when it reaches the top or bottom of the screen. (default t)
dotspacemacs-smooth-scrolling t
;; Show the scroll bar while scrolling. The auto hide time can be configured
;; by setting this variable to a number. (default t)
dotspacemacs-scroll-bar-while-scrolling t
;; Control line numbers activation.
;; If set to `t', `relative' or `visual' then line numbers are enabled in all
;; `prog-mode' and `text-mode' derivatives. If set to `relative', line
;; numbers are relative. If set to `visual', line numbers are also relative,
;; but only visual lines are counted. For example, folded lines will not be
;; counted and wrapped lines are counted as multiple lines.
;; This variable can also be set to a property list for finer control:
;; '(:relative nil
;; :visual nil
;; :disabled-for-modes dired-mode
;; doc-view-mode
;; markdown-mode
;; org-mode
;; pdf-view-mode
;; text-mode
;; :size-limit-kb 1000)
;; When used in a plist, `visual' takes precedence over `relative'.
;; (default nil)
dotspacemacs-line-numbers '(:relative
:size-limit-kb 1000)
;; Code folding method. Possible values are `evil', `origami' and `vimish'.
;; (default 'evil)
dotspacemacs-folding-method 'evil
;; If non-nil and `dotspacemacs-activate-smartparens-mode' is also non-nil,
;; `smartparens-strict-mode' will be enabled in programming modes.
;; (default nil)
dotspacemacs-smartparens-strict-mode nil
;; If non-nil smartparens-mode will be enabled in programming modes.
;; (default t)
dotspacemacs-activate-smartparens-mode t
;; If non-nil pressing the closing parenthesis `)' key in insert mode passes
;; over any automatically added closing parenthesis, bracket, quote, etc…
;; This can be temporary disabled by pressing `C-q' before `)'. (default nil)
dotspacemacs-smart-closing-parenthesis t
;; Select a scope to highlight delimiters. Possible values are `any',
;; `current', `all' or `nil'. Default is `all' (highlight any scope and
;; emphasis the current one). (default 'all)
dotspacemacs-highlight-delimiters 'current
;; If non-nil, start an Emacs server if one is not already running.
;; (default nil)
dotspacemacs-enable-server t
;; Set the emacs server socket location.
;; If nil, uses whatever the Emacs default is, otherwise a directory path
;; like \"~/.emacs.d/server\". It has no effect if
;; `dotspacemacs-enable-server' is nil.
;; (default nil)
dotspacemacs-server-socket-dir nil
;; If non-nil, advise quit functions to keep server open when quitting.
;; (default nil)
dotspacemacs-persistent-server nil
;; List of search tool executable names. Spacemacs uses the first installed
;; tool of the list. Supported tools are `rg', `ag', `pt', `ack' and `grep'.
;; (default '("rg" "ag" "pt" "ack" "grep"))
dotspacemacs-search-tools '("rg" "ag" "pt" "ack" "grep")
;; Format specification for setting the frame title.
;; %a - the `abbreviated-file-name', or `buffer-name'
;; %t - `projectile-project-name'
;; %I - `invocation-name'
;; %S - `system-name'
;; %U - contents of $USER
;; %b - buffer name
;; %f - visited file name
;; %F - frame name
;; %s - process status
;; %p - percent of buffer above top of window, or Top, Bot or All
;; %P - percent of buffer above bottom of window, perhaps plus Top, or Bot or All
;; %m - mode name
;; %n - Narrow if appropriate
;; %z - mnemonics of buffer, terminal, and keyboard coding systems
;; %Z - like %z, but including the end-of-line format
;; If nil then Spacemacs uses default `frame-title-format' to avoid
;; performance issues, instead of calculating the frame title by
;; `spacemacs/title-prepare' all the time.
;; (default "%I@%S")
dotspacemacs-frame-title-format "%I@%S"
;; Format specification for setting the icon title format
;; (default nil - same as frame-title-format)
dotspacemacs-icon-title-format nil
;; Show trailing whitespace (default t)
dotspacemacs-show-trailing-whitespace t
;; Delete whitespace while saving buffer. Possible values are `all'
;; to aggressively delete empty line and long sequences of whitespace,
;; `trailing' to delete only the whitespace at end of lines, `changed' to
;; delete only whitespace for changed lines or `nil' to disable cleanup.
;; (default nil)
dotspacemacs-whitespace-cleanup 'changed
;; If non-nil activate `clean-aindent-mode' which tries to correct
;; virtual indentation of simple modes. This can interfere with mode specific
;; indent handling like has been reported for `go-mode'.
;; If it does deactivate it here.
;; (default t)
dotspacemacs-use-clean-aindent-mode t
;; Accept SPC as y for prompts if non-nil. (default nil)
dotspacemacs-use-SPC-as-y nil
;; If non-nil shift your number row to match the entered keyboard layout
;; (only in insert state). Currently supported keyboard layouts are:
;; `qwerty-us', `qwertz-de' and `querty-ca-fr'.
;; New layouts can be added in `spacemacs-editing' layer.
;; (default nil)
dotspacemacs-swap-number-row nil
;; Either nil or a number of seconds. If non-nil zone out after the specified
;; number of seconds. (default nil)
dotspacemacs-zone-out-when-idle nil
;; Run `spacemacs/prettify-org-buffer' when
;; visiting files of Spacemacs.
;; (default nil)
dotspacemacs-pretty-docs nil))
(defun dotspacemacs/user-env ()
"Environment variables setup.
This function defines the environment variables for your Emacs session. By
default it calls `spacemacs/load-spacemacs-env' which loads the environment
variables declared in `~/.spacemacs.env' or `~/.spacemacs.d/.spacemacs.env'.
See the header of this file for more information."
(defun dotspacemacs/user-init ()
"Initialization for user code:
This function is called immediately after `dotspacemacs/init', before layer
It is mostly for variables that should be set before packages are loaded.
If you are unsure, try setting them in `dotspacemacs/user-config' first."
;; Custom Configuration file
custom-file "~/.spacemacs.d/custom.el"
;; Font GC
inhibit-compacting-font-caches t
;; Files
create-lockfiles nil
indent-tabs-mode nil
;; Indentation
tab-width 2
trucate-lines t
;; Line Length
;; use github as standard
fill-column 125
;; Evil
evil-escape-delay 0.3
evil-kill-on-visual-paste nil
evil-shift-round nil
;; Whitespace
whitespace-style '(face tabs tab-mark)
show-trailing-whitespace t
;; Flycheck
flycheck-check-syntax-automatically '(save mode-enabled)
;; Web
web-mode-attr-indent-offset 2
web-mode-auto-close-style 2 ; Close on </ and >
web-mode-code-indent-offset 2
web-mode-css-indent-offset 2
web-mode-markup-indent-offset 2
;; Emoji
emojify-display-style 'unicode
company-emoji-insert-unicode t
;; CSS
css-indent-offset 2
;; Ruby
flycheck-rubocop-lint-only t
ruby-align-to-stmt-keywords '(if while unless until begin case for def)
;; Emacs Server
powerline-height 27
;; server-socket-dir (format "/tmp/emacs%d" (user-uid))
;; Org Mode
org-capture-templates '(("t" "Todo [inbox]" entry
(file+headline "~/org/" "Tasks")
"* TODO %i%?")
("T" "Tickler" entry
(file+headline "~/org/" "Tickler")
"* %i%? \n %U"))))
(defun dotspacemacs/user-load ()
"Library to load while dumping.
This function is called only while dumping Spacemacs configuration. You can
`require' or `load' the libraries of your choice that will be included in the
(defun dotspacemacs/user-config ()
"Configuration for user code:
This function is called at the very end of Spacemacs startup, after layer
Put your configuration code here, except for variables that should be set
before packages are loaded."
;; enable emojis everywhere, but don't advertise it.
(spacemacs|use-package-add-hook emojify
(spacemacs|diminish global-emojify-mode))
(spacemacs/add-to-hooks 'global-emojify-mode '(after-init-hook))
;; Fix annoyance
(fset 'evil-visual-update-x-selection 'ignore) ; :angel: Prevent the visual selection from overriding the system clipboard
;; UI
(with-eval-after-load 'neotree
;; Use `o` and `I` in NeoTree and mimic NERDTree
(evil-define-key 'evilified neotree-mode-map (kbd "o") 'neotree-enter)
(evil-define-key 'evilified neotree-mode-map (kbd "I") 'neotree-hidden-file-toggle))
;; For persistent server, do not kill the server just the frame.
;; (evil-leader/set-key
;; "q q" 'spacemacs/frame-killer)
;; Use magit for git commits
;;(global-git-commit-mode t)
;; Miscellaneous
;; (spacemacs/add-to-hooks 'turn-on-fci-mode '(text-mode-hook))
;; Periodicly commit the ~/org directory every N minutes
;; (spacemacs/add-to-hooks 'git-auto-commit-mode '(org-mode-hook))
;; Direnv for projects
(spacemacs/add-to-hooks 'direnv-mode '(projectile-mode-hook))
;; Tabs for Makefile
(spacemacs/add-to-hooks '(lambda ()
(setq indent-tabs-mode t))
;; Emacs Lisp enable evil-cleverparens
;; Flycheck mode for Org mode
(spacemacs|use-package-add-hook flycheck
(flycheck-add-mode 'proselint 'org-mode))
(spacemacs/add-to-hooks 'flycheck-mode '(markdown-mode-hook org-mode-hook gfm-mode-hook))
;; Additional
;; Lastly, load custom-file (but only if the file exists).
(when (file-exists-p custom-file)
(load-file custom-file)))