Commits on Oct 1, 2012
  1. Added a startup script for net/vpnc, as mentioned on tech-pkg@

    khorben committed Oct 1, 2012
    Set and using $pidfile as suggested by joerg@
    ok hubertf@
Commits on Sep 30, 2012
  1. -openh323-1.19.1

    dholland committed Sep 30, 2012
    Also note ptlib-2.10.7.
    It seems that openh323 went away and was replaced by h323plus.
    This update includes a bonus: we can then remove devel/pwlib.
  2. HOMEPAGE leads to a squatter; comment it out and also note the homepage

    dholland committed Sep 30, 2012
    of the apparent successor project.
  3. rlwrap 0.37

    dholland committed Sep 30, 2012
  4. Update to 0.37; closes PR 46078.

    dholland committed Sep 30, 2012
    Now depends on perl.
    0.37  Commands that emit "status lines" using backspaces and carriage
          returns could confuse rlwrap
          rlwrap uses C strings internally, and thus cannot cope with
          command output that contains zero bytes (padding). It used to
          replace these with spaces, now the zero bytes are removed.
          if the RLWRAP_HOME is set, but $RLWRAP_HOME doesn't exist, rlwrap
          will create it
          typo: SIGERR instead of SIG_ERR in signals.c
    0.36  Entering a line from vi command mode would echo the input twice
          Output from very busy commands would not always be printed on time
          When rlwrap kills itself after a command crash it will not dump
          core, in order to avoid clobbering command's much more interesting
          core dump.
          Premature filter death is now reported properly (it used to only
          say: "EOF reading from filter" or "Broken pipe writing to filter")
    0.35  config.{guess,sub} have been updated to version 2009-12-13
          Corrected array bounds error in my_putstr("") (which could make
          rlwrap write an extra newline when exiting, but might even crash
          on some systems)
          Many small improvements and fixes for multi-line input:
            Multi-line inputs are now written to the inferior command one
            line at a time, so that command's response (e.g. a continuation
            prompt) can be interleaved with the echo'ed (multi-line) input.
            Calling an external editor will no longer obliterate the prompt,
            and line/column positions are now correct.
            After a multi-line edit in vi-mode, the cursor will no longer
            end up one line too high.
          CTRL-D on an empty line was handed directly to command, but also
          (erroneously) put in readline's input buffer
          Many small fixes and improvements in signal handling:
             SIGSEGV, and other "error" signals like SIGFPE, are now unblocked
             all of the time, so that rlwrap can always clean up after a crash.
             Since version 0.25 rlrwap's transparency extends to signals: if
             the inferior command segfaults, rlwrap will kill itself with a
             SIGSEGV. In order to get the bug reports where they belong,
             rlwrap now reports explicitly that it has not crashed itself.
             rlwrap's call to sigaction forgot to set the signal mask (!)
             Continuing after CTRL-Z on QNX now wakes up command
          Added --one-shot (-o) and --only-cook (-O) options
          debug log is now in a format that works well with emacs' grep-mode
          rlwrap's bindable readline function names (like rlwrap-call-editor) are
          now in hyphen-style instead of underscore_style (use of the
          old_style_names will now be flagged as an error)
          Filters can now prevent a prompt from being cooked by "rejecting" it.
 would set $_ incorrectly in echo and output handlers.
 manpage is now created by newer (and less buggy)
          version of pod2man
          Added EXAMPLES section and -t option to rlwrap manpage
    0.34  Binding wide (e.g. utf-8) chars in .inputrc now works
          prefix arguments are now correctly reset (M-5 a b now
          yields aaaaab instead of aaaaabbbbb)
    0.33  rlwrap incorrectly fed terminfo-style capnames ("dl1") instead of
          termcap codes ("dl") into tgetstr(). On newer Debian systems this
          exposed a bug where random garbage would be printed by rlwrap
          Hyphens in rlwrap manpage are now all properly escaped
 now only re-sets $filter->cumulative_output when an
          INPUT message is received
    0.32  Major new feature: filtering. Filters sit between rlwrap and the
          wrapped command, re-writing command output, input, prompts,
          history, and completion word lists.
          System-wide filters live in DATADIR/rlwrap/filters (where DATADIR =
          /usr/local/share by default, installation-dependent) Because of this,
          completions now live in DATADIR/rlwrap/completions (until now:
          To make filter writing easy, a perl module has
          been added. It doesn't become part of your perl installation, but lives
          in DATADIR/rlwrap/filters
          rlwrap didn't properly check errno after reading from inferior pty.
          This could lead to a spurious "read error on master pty"
          Instead of using crusty old signal(), signal handlers are now set
          by sigaction() without SA_RESTART (BSD semantics) Different
          syscall-restarting behaviour among systems caused hard-to-trace
          Now copies inferior pty's c_oflags to stdout before
          output. (some editors like joe would mess up the screen)
          prompt handling logic has been streamlined. Coloured prompt handling is
          reliable now, even for long prompts.
          At program exit, rlwrap now outputs a newline only when the client
          Added -g, -I, -N, -S, -w and -z options
          Removed -F option (and added a filter to replace it)
          -p option now takes colour names (-pYellow)
          rlwrap (and readline) uses C strings internally, which could cause problems
          with commands that output '\0' bytes. In direct mode, such
          characters are left untouched, but in readline mode they are
          replaced by spaces.
          the tools directory has been updated, so that configure will
          feel at home even on newer systems
          tested on SunOS, AIX, FreeBSD, HP/UX, QNX (thanks to, as
          well as cygwin and linux
  5. Updated benchmark/thrulay to 0.9

    adam committed Sep 30, 2012
  6. Added devel/userspace-rcu version 0.7.3

    pettai committed Sep 30, 2012
  7. Added userspace-rcu

    pettai committed Sep 30, 2012
  8. Changes 0.9:

    adam committed Sep 30, 2012
    Not known.
  9. liburcu is a userspace RCU (read-copy-update) library. This data

    pettai committed Sep 30, 2012
    synchronization library provides read-side access which scales linearly
    with the number of cores. It does so by allowing multiples copies of a
    given data structure to live at the same time, and by monitoring the
    data structure accesses to detect grace periods after which memory
    reclamation is possible.
  10. Update BUILDLINK_API_DEPENDS.dbus per PR 47023.

    dholland committed Sep 30, 2012
  11. did flightgear

    dholland committed Sep 30, 2012
  12. flightgear-data

    dholland committed Sep 30, 2012
  13. Update "ejabberd" package to version 2.1.11. Changes since 2.1.10:

    tron committed Sep 30, 2012
    - HTTP service
      - Fix ejabberd_http:get_line
      - Don't use binary:match to extract lines from binaries
      - Parse and encode https header names like native http parser does
      - Parse correctly https request split into multiple packets
      - Properly handle HEAD request in mod_http_bind (EJAB-1538)
      - New option default_host for handling requests with ambiguous Host
    - ODBC
      - New ODBC support for mod_announce
      - New ODBC support for mod_blocking
      - New ODBC support for mod_irc
      - New ODBC support for mod_muc
      - New ODBC support for mod_shared_roster
      - New ODBC support for mod_vcard_xupdate
      - Add ODBC exporting function for privacy table
      - Work also with some unicode strings in PgSQL (EJAB-1490)
      - Replace a single quote with double quotes in an ODBC escape
    - SSL
      - Make sure that res is initialized in all cases
      - Parse correctly https request split into multiple packets (EJAB-1537)
      - Added missed tls:recv_data/2
      - Don't ignore Length parameter in tls:recv
      - Avoid quadratic behavior in reading SSL data
      - Dix http_bind webserver TLS fail on Chrome (EJAB-1530)
    - Miscelanea
      - Assume we have only one CPU when an auto-detection fails (EJAB-1516)
      - Auth: Relax digest-uri handling (EJAB-1529)
      - Caps: Cache caps timestamp before the IQ-request is done
      - IRC: Use of MUC password
      - Private: misc errors cases fixes
      - Pubsub: return user affiliation for a specified node (EJAB-1294)
      - Shared Roster: Foreign items were not pushed (EJAB-1509)
      - Shared Roster LDAP: user substitution in ldap_rfilter (EJAB-1555)
      - Windows: Fix makefile rules for building DLLs
  14. Update to 2.8.0. No separate changelog, see games/flightgear.

    dholland committed Sep 30, 2012
    Caution: distfile has more than doubled in size to nearly 700MB.
  15. + p5-HTML-Template-Expr.

    wiz committed Sep 30, 2012
  16. Import p5-HTML-Template-Expr-0.07 as www/p5-HTML-Template-Expr.

    wiz committed Sep 30, 2012
    This module provides an extension to HTML::Template which allows
    expressions in the template syntax. This is purely an addition -
    all the normal HTML::Template options, syntax and behaviors will
    still work.
  17. Build fix:

    jnemeth committed Sep 30, 2012
    This is the second attempt to fix the build problem that some people
    have seen (I have received inconsistent reports).  This should
    force chan_mgcp to build on systems where it can.  It was tested
    on NetBSD 5.0, thus ensuring that it doesn't break previously
    working systems; and NetBSD 6.99.7, where I finally saw the problem
    that some people were reporting.
  18. + Transmission-2.71, Transmission-gui-2.71, cppunit-1.13.1,

    wiz committed Sep 30, 2012
      dbus-1.6.8, ffmpeg-20120609.1.0, ffplay-20120609.1.0, py-cython-0.17.1,
      py-pytz-2012f, x264-devel-20120929.
  19. + python33-3.3.0.

    wiz committed Sep 30, 2012
  20. freerdist is called rdist6

    mspo committed Sep 30, 2012
  21. - mysql-5.1.65.

    taca committed Sep 30, 2012
    + mysql-5.5.28.
  22. Fix building with Clang

    adam committed Sep 30, 2012
  23. regen

    wiz committed Sep 30, 2012
  24. simgear + flightgear

    dholland committed Sep 30, 2012
  25. Update to 2.8.0. Switches build system to cmake.

    dholland committed Sep 30, 2012
    August 17, 2012 -- FlightGear v2.8.0 is Released
    The FlightGear development team is happy to announce the v2.8.0
    release of FlightGear, the free, open-source flight simulator. This
    new version contains many exciting new features, enhancements and
    V2.8.0 includes improvements making FlightGear world more realistic
    than ever before.  Placement of random buildings and trees match the
    underlying terrain texture, and urban areas now have denser random
    buildings.  Textures can be region specific, and users can select
    between summer and winter textures in-sim.  An improved atmospheric
    scattering and terrain haze model means the lighting of the terrain is
    more realistic.  Finally, a new automated system is now available for
    scenery submissions that automatically get rolled into the scenery
    distribution to be enjoyed by everyone.
    Some of the major changes include:
    AI Traffic
        Improved aircraft models and textures.
    Flight dynamics
        FlightGear has been synced with the JSBSim project.
        Region-specific terrain textures are used for Europe and Hawaii.
    Now towns in Europe look different from towns in the USA.
        Cities and towns now look more populated due to random 3D
    buildings, complete with lighting at night.
        Scenery looks more realistic due to improved placement of random
    objects, buildings and trees.
        Airport signs are now rendered in 3D, with support for
    double-sided signs. Full apt.dat 850 syntax is supported.
        You can now select between summer and winter scenery in-sim.
    Instruments & HUDs
        A new flexible, 2D rendering system designed for complex
    instruments such as CDUs, MFDs, EICAS, HUDs and other glass cockpit
    interfaces. Canvas allows aircraft designers to easily build complex
    instruments without needing specialized C++ code.
        Support for translation of the main menu into languages other than
        A Nasal API is available allowing access to Navigation and
    route-manager data.
    Highlighted new and improved aircraft
        Airwave Xtreme 150: complete new (JSBSim) flight dynamics, new
    model, advanced pilot animations.
        Cessna 337G Skymaster
    Project infrastructure
        Various improvements to our scenery database make it easier than
    ever to add, delete or update objects to the FlightGear world.
        The new aircraft download page allows you to easily find quality
    aircraft, by filtering on status indications.
    Visual effects
        Improved simulation of atmospheric light scattering with terrain
        An experimental renderer, named after the famous painter
    Rembrandt, is included for testing purposes. The Rembrandt rendered
    supports multiple light sources (landing lights, instrument lights),
    real-time shadows and ambient occlusion across aircraft and scenery
    for a much more realistic visual experience.
        Additional joysticks and rudder pedals are supported out-of-the-box:
            InterLink Elite
            Micorosft Xbox 360 Controller
            Qware USB
            Saitek Cyborg X (F.L.Y. 5)
            Saitek Pro Flight Cessna Yoke
            Saitek Pro Flight Cessna Trim Wheel
            Saitek Pro Flight Cessna Rudder Pedals
            Speedlink Defender
        A French partial translation of The FlightGear Manual is now available.
    Bug fixes
        See our bugtracker for an extensive list of the bugs fixed in this release.
  26. Updated pkgtools/url2pkg to 2.15

    asau committed Sep 30, 2012
  27. Replace WRKDIR with WRKSRC in post-extract target.

    ryoon committed Sep 30, 2012
    Thanks to Krister Walfridsson on