Skip to content
This repository

HTTPS clone URL

Subversion checkout URL

You can clone with HTTPS or Subversion.

Download ZIP
branch: trunk
Fetching contributors…

Cannot retrieve contributors at this time

file 115 lines (97 sloc) 4.241 kb
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115
# $NetBSD: ntp.conf,v 1.19 2014/01/14 13:23:46 apb Exp $
#
# NetBSD default Network Time Protocol (NTP) configuration file for ntpd

# This file is intended to be both a usable default, and a Quick-Start
# Guide. The directives and options listed here are not at all complete.
# A great deal of additional documentation, including links to FAQS and
# other guides, may be found on the official NTP web site, in particular
#
# http://www.ntp.org/documentation.html
#

# Process ID file, so that the daemon can be signalled from scripts

pidfile /var/run/ntpd.pid

# The correction calculated by ntpd(8) for the local system clock's
# drift is stored here.

driftfile /var/db/ntp.drift

# Suppress the syslog(3) message for each peer synchronization change.

logconfig -syncstatus

# Refuse to set the local clock if there are too few good peers or servers.
# This may help minimize disruptions due to network congestion. Don't
# do this if you configure only one server!

tos minsane 2

# Set the number of tries to register with mdns. 0 means never
#
mdnstries 0

# New ntpd disables the ntpdc protocol by default, to re-enable uncomment
# the following line
# enable mode7

# Access control restrictions.
# See /usr/share/doc/html/ntp/accopt.html for syntax.
# See <http://support.ntp.org/bin/view/Support/AccessRestrictions> for advice.
# Last match wins.
#
# Some of the more common keywords are:
# ignore Deny packets of all kinds.
# kod Send "kiss-o'-death" packets if clients exceed rate
# limits.
# nomodify Deny attempts to modify the state of the server via
# ntpq or ntpdc queries.
# noquery Deny all ntpq and ntpdc queries. Does not affect time
# synchronisation.
# nopeer Prevent establishing new peer associations.
# Does not affect peers configured using "peer" lines.
# Does not affect client/server time synchronisation.
# noserve Deny all time synchronisation. Does not affect ntpq or
# ntpdc queries.
# notrap Deny the trap subset of the ntpdc control message protocol.
# notrust Deny packets that are not cryptographically authenticated.
#
# By default, allow client/server time exchange without prior
# arrangement, but deny configuration changes, queries, and peer
# associations that were not explicitly configured.
#
restrict default kod nopeer noquery

# Fewer restrictions for the local subnet.
# (Uncomment and adjust as appropriate.)
#
#restrict 192.0.2.0 mask 255.255.255.0 kod nomodify notrap nopeer
#restrict 2001:db8:: mask ffff:ffff:: kod nomodify notrap nopeer

# No restrictions for localhost.
#
restrict 127.0.0.1
restrict ::1

# Hereafter should be "server" or "peer" statements to configure other
# hosts to exchange NTP packets with.
#
# See <http://support.ntp.org/bin/view/Support/DesigningYourNTPNetwork>
# and <http://support.ntp.org/bin/view/Support/SelectingOffsiteNTPServers>
# for advice.
#
# Peers or servers should be selected in such a way that the network
# path to them is short, uncongested, and symmetric (that is, the series
# of links and routers used to get to the peer is the same one that
# the peer uses to get back). The best place to start looking for NTP
# peers for your system is within your own network, or at your Internet
# Service Provider (ISP).
#
# Ideally, you should select at least three other systems to talk NTP
# with, for an "what I tell you three times is true" effect.

#peer an.ntp.peer.goes.here
#server an.ntp.server.goes.here

# The pool.ntp.org project coordinates public time servers provided by
# volunteers. See <http://www.pool.ntp.org>. The *.netbsd.pool.ntp.org
# servers are intended to be used by default on NetBSD hosts, but
# servers that are closer to you are likely to be better. Consider
# using servers specific to your country, a nearby country, or your
# continent.
#
# The pool.ntp.org project needs more volunteers! The only criteria to
# join are a nailed-up connection and a static IP address. For details,
# see the web page:
#
# http://www.pool.ntp.org/join.html
#

server 0.netbsd.pool.ntp.org
server 1.netbsd.pool.ntp.org
server 2.netbsd.pool.ntp.org
server 3.netbsd.pool.ntp.org
Something went wrong with that request. Please try again.