etcd.py

#!/usr/bin/python3

from charms import layer

from charms.layer import snap

from charms.reactive import when
from charms.reactive import when_any
from charms.reactive import when_not
from charms.reactive import set_state
from charms.reactive import remove_state
from charms.reactive import hook

from charms.templating.jinja2 import render

from charmhelpers.core.hookenv import log
from charmhelpers.core.hookenv import leader_set
from charmhelpers.core.hookenv import leader_get
from charmhelpers.core.hookenv import status_set
from charmhelpers.core.hookenv import storage_get

from charmhelpers.core.hookenv import application_version_set
from charmhelpers.core.hookenv import open_port
from charmhelpers.core.hookenv import close_port
from charmhelpers.core import hookenv
from charmhelpers.core import host
from charmhelpers.contrib.charmsupport import nrpe

from etcdctl import EtcdCtl
from etcdctl import get_connection_string
from etcd_databag import EtcdDatabag

from shlex import split
from subprocess import check_call
from subprocess import check_output
from subprocess import CalledProcessError

import os
import charms.leadership  # noqa
import socket
import time


# Layer Note:   the @when_not etcd.installed state checks are relating to
# a boundry that was superimposed by the etcd-24 release which added support
# for snaps. Snapped etcd is now the only supported mechanism by this charm.
# References to this state will be wiped sometime within the next 10 releases
# of the charm.


# Override the default nagios shortname regex to allow periods, which we
# need because our bin names contain them (e.g. 'snap.foo.daemon'). The
# default regex in charmhelpers doesn't allow periods, but nagios itself does.
nrpe.Check.shortname_re = '[\.A-Za-z0-9-_]+$'


@when('etcd.installed')
def snap_upgrade_notice():
    status_set('blocked', 'Manual migration required. http://bit.ly/2oznAUZ')


@when_any('etcd.registered', 'etcd.leader.configured')
@when_not('etcd.installed')
def check_cluster_health():
    ''' report on the cluster health every 5 minutes'''
    etcdctl = EtcdCtl()
    health = etcdctl.cluster_health()

    # Determine if the unit is healthy or unhealthy
    if 'unhealthy' in health['status']:
        unit_health = "UnHealthy"
    else:
        unit_health = "Healthy"

    # Determine units peer count, and surface 0 by default
    try:
        peers = len(etcdctl.member_list())
    except Exception:
        unit_health = "Errored"
        peers = 0

    bp = "{0} with {1} known peer{2}"
    status_message = bp.format(unit_health, peers, 's' if peers != 1 else '')

    status_set('active', status_message)


@when('snap.installed.etcd')
@when_not('etcd.installed')
def set_app_version():
    ''' Surface the etcd application version on juju status '''
    # note - the snap doesn't place an etcd alias on disk. This shall infer
    # the version from etcdctl, as the snap distributes both in lockstep.
    application_version_set(etcd_version())


@when_not('certificates.available')
def missing_relation_notice():
    status_set('blocked', 'Missing relation to certificate authority.')


@when('certificates.available')
@when_not('etcd.ssl.placed')
def prepare_tls_certificates(tls):
    status_set('maintenance', 'Requesting tls certificates.')
    common_name = hookenv.unit_public_ip()
    sans = []
    sans.append(hookenv.unit_public_ip())
    sans.append(hookenv.unit_private_ip())
    sans.append(socket.gethostname())
    certificate_name = hookenv.local_unit().replace('/', '_')
    tls.request_server_cert(common_name, sans, certificate_name)


@hook('upgrade-charm')
def remove_states():
    # stale state cleanup (pre rev6)
    remove_state('etcd.tls.secured')

    remove_state('etcd.ssl.placed')


@when('snap.installed.etcd')
@when('leadership.is_leader')
@when_any('config.changed.port', 'config.changed.management_port')
@when_not('etcd.installed')
def leader_config_changed():
    ''' The leader executes the runtime configuration update for the cluster,
    as it is the controlling unit. Will render config, close and open ports and
    restart the etcd service.'''
    configuration = hookenv.config()
    previous_port = configuration.previous('port')
    log('Previous port: {0}'.format(previous_port))
    previous_mgmt_port = configuration.previous('management_port')
    log('Previous management port: {0}'.format(previous_mgmt_port))

    if previous_port and previous_mgmt_port:
        bag = EtcdDatabag()
        etcdctl = EtcdCtl()
        members = etcdctl.member_list()
        # Iterate over all the members in the list.
        for unit_name in members:
            # Grab the previous peer url and replace the management port.
            peer_urls = members[unit_name]['peer_urls']
            log('Previous peer url: {0}'.format(peer_urls))
            old_port = ':{0}'.format(previous_mgmt_port)
            new_port = ':{0}'.format(configuration.get('management_port'))
            url = peer_urls.replace(old_port, new_port)
            # Update the member's peer_urls with the new ports.
            log(etcdctl.member_update(members[unit_name]['unit_id'], url))
        # Render just the leaders configuration with the new values.
        render_config()
        # Close the previous client port and open the new one.
        close_open_ports()
        leader_set({'leader_address':
                   get_connection_string([bag.private_address],
                                         bag.management_port)})
        host.service_restart(bag.etcd_daemon)


@when('snap.installed.etcd')
@when_not('leadership.is_leader')
@when_any('config.changed.port', 'config.changed.management_port')
@when_not('etcd.installed')
def follower_config_changed():
    ''' Follower units need to render the configuration file, close and open
    ports, and restart the etcd service. '''
    bag = EtcdDatabag()
    log('Rendering defaults file for {0}'.format(bag.unit_name))
    # Render the follower's configuration with the new values.
    render_config()
    # Close the previous client port and open the new one.
    close_open_ports()


@when('db.connected')
@when('etcd.ssl.placed')
@when('cluster.joined')
def send_cluster_connection_details(cluster, db):
    ''' Need to set the cluster connection string and
    the client key and certificate on the relation object. '''
    cert = read_tls_cert('client.crt')
    key = read_tls_cert('client.key')
    ca = read_tls_cert('ca.crt')
    etcdctl = EtcdCtl()
    bag = EtcdDatabag()

    # Set the key, cert, and ca on the db relation
    db.set_client_credentials(key, cert, ca)

    port = hookenv.config().get('port')
    # Get all the peers participating in the cluster relation.
    members = cluster.get_peer_addresses()
    # Append our own address to the membership list, because peers dont self
    # actualize
    members.append(bag.private_address)
    members.sort()
    # Create a connection string with all the members on the configured port.
    connection_string = get_connection_string(members, port)
    # Set the connection string on the db relation.
    db.set_connection_string(connection_string, version=etcdctl.version())


@when('db.connected')
@when('etcd.ssl.placed')
@when_not('cluster.joined')
def send_single_connection_details(db):
    ''' '''
    cert = read_tls_cert('client.crt')
    key = read_tls_cert('client.key')
    ca = read_tls_cert('ca.crt')

    etcdctl = EtcdCtl()

    # Set the key and cert on the db relation
    db.set_client_credentials(key, cert, ca)

    bag = EtcdDatabag()
    # Get all the peers participating in the cluster relation.
    members = [bag.private_address]
    # Create a connection string with this member on the configured port.
    connection_string = get_connection_string(members, bag.port)
    # Set the connection string on the db relation.
    db.set_connection_string(connection_string, version=etcdctl.version())


@when('proxy.connected')
@when('etcd.ssl.placed')
@when_any('etcd.leader.configured', 'cluster.joined')
def send_cluster_details(proxy):
    ''' Sends the peer cluster string to proxy units so they can join and act
    on behalf of the cluster. '''
    cert = read_tls_cert('client.crt')
    key = read_tls_cert('client.key')
    ca = read_tls_cert('ca.crt')
    proxy.set_client_credentials(key, cert, ca)

    # format a list of cluster participants
    etcdctl = EtcdCtl()
    peers = etcdctl.member_list()
    cluster = []
    for peer in peers:
        thispeer = peers[peer]
        # Potential member doing registration. Default to skip
        if 'peer_urls' not in thispeer.keys() or not thispeer['peer_urls']:
            continue
        peer_string = "{}={}".format(thispeer['name'], thispeer['peer_urls'])
        cluster.append(peer_string)

    proxy.set_cluster_string(','.join(cluster))


@when('config.changed.channel')
@when_not('etcd.installed')
def snap_install():
    channel = hookenv.config('channel')
    snap.install('etcd', channel=channel, classic=True)


@when('etcd.ssl.placed')
@when_not('snap.installed.etcd')
def install_etcd():
    ''' Attempt resource get on the "etcd" and "etcdctl" resources. If no
    resources are provided attempt to install from the archive only on the
    16.04 (xenial) series. '''

    if charms.reactive.is_state('etcd.installed'):
        msg = 'Manual upgrade required. run-action snap-upgrade.'
        status_set('blocked', msg)
        return

    status_set('maintenance', 'Installing etcd.')

    channel = hookenv.config('channel')
    # Grab the snap channel from config
    snap.install('etcd', channel=channel, classic=True)


@when('snap.installed.etcd')
@when('etcd.ssl.placed')
@when('cluster.joined')
@when_not('leadership.is_leader')
@when_not('etcd.registered')
@when_not('etcd.installed')
def register_node_with_leader(cluster):
    '''
    Control flow mechanism to perform self registration with the leader.

    Before executing self registration, we must adhere to the nature of offline
    static turnup rules. If we find a GUID in the member list without peering
    information the unit will enter a race condition and must wait for a clean
    status output before we can progress to self registration.
    '''
    # We're going to communicate with the leader, and we need our bootstrap
    # startup string once.. TBD after that.
    etcdctl = EtcdCtl()
    bag = EtcdDatabag()
    # Assume a hiccup during registration and attempt a retry
    if bag.cluster_unit_id:
        bag.cluster = bag.registration_peer_string
        # conf_path = '{}/etcd.conf'.format(bag.etcd_conf_dir)
        render_config(bag)
        time.sleep(2)

    try:
        peers = etcdctl.member_list(leader_get('leader_address'))
    except CalledProcessError:
        log("Etcd attempted to invoke registration before service ready")
        # This error state is transient, and does not imply the unit is broken.
        # Erroring at this stage can be resolved, and should not effect the
        # overall condition of unit turn-up. Return from the method and let the
        # charm re-invoke on next run
        return

    for unit in peers:
        if 'client_urls' not in peers[unit].keys():
            # we cannot register. State not attainable.
            msg = 'Waiting for unit to complete registration.'
            status_set('waiting', msg)
            return

    if not bag.cluster_unit_id:
        bag.leader_address = leader_get('leader_address')
        resp = etcdctl.register(bag.__dict__)
        if resp and 'cluster_unit_id' in resp.keys() and 'cluster' in resp.keys():  # noqa
            bag.cache_registration_detail('cluster_unit_id',
                                          resp['cluster_unit_id'])
            bag.cache_registration_detail('registration_peer_string',
                                          resp['cluster'])

            bag.cluster_unit_id = resp['cluster_unit_id']
            bag.cluster = resp['cluster']

    render_config(bag)
    host.service_restart(bag.etcd_daemon)
    time.sleep(2)

    # Check health status before we say we are good
    etcdctl = EtcdCtl()
    status = etcdctl.cluster_health()
    if 'unhealthy' in status:
        status_set('blocked', 'Cluster not healthy.')
        return
    open_port(bag.port)
    set_state('etcd.registered')


@when('etcd.ssl.placed')
@when('leadership.is_leader')
@when_not('etcd.leader.configured')
@when_not('etcd.installed')
def initialize_new_leader():
    ''' Create an initial cluster string to bring up a single member cluster of
    etcd, and set the leadership data so the followers can join this one. '''
    bag = EtcdDatabag()
    bag.token = bag.token
    bag.cluster_state = 'new'
    cluster_connection_string = get_connection_string([bag.private_address],
                                                      bag.management_port)
    bag.cluster = "{}={}".format(bag.unit_name, cluster_connection_string)

    render_config(bag)
    host.service_restart(bag.etcd_daemon)

    # sorry, some hosts need this. The charm races with systemd and wins.
    time.sleep(2)

    # Check health status before we say we are good
    etcdctl = EtcdCtl()
    status = etcdctl.cluster_health()
    if 'unhealthy' in status:
        status_set('blocked', 'Cluster not healthy.')
        return
    # We have a healthy leader, broadcast initial data-points for followers
    open_port(bag.port)
    leader_connection_string = get_connection_string([bag.private_address],
                                                     bag.port)
    leader_set({'token': bag.token,
                'leader_address': leader_connection_string,
                'cluster': bag.cluster})

    # finish bootstrap delta and set configured state
    set_state('etcd.leader.configured')


@when('tls_client.ca.saved', 'tls_client.server.key.saved',
      'tls_client.server.certificate.saved',
      'tls_client.client.certificate.saved')
@when_not('etcd.ssl.placed')
def tls_state_control():
    ''' This state represents all the complexity of handling the TLS certs.
        instead of stacking decorators, this state condenses it into a single
        state we can gate on before progressing with secure setup. Also handles
        ensuring users of the system can access the TLS certificates'''

    bag = EtcdDatabag()
    if not os.path.isdir(bag.etcd_conf_dir):
        hookenv.log('Waiting for etcd conf creation.')
        return
    cmd = ['chown', '-R', 'root:ubuntu', bag.etcd_conf_dir]
    check_call(cmd)
    set_state('etcd.ssl.placed')


@when_not('etcd.pillowmints')
def render_default_user_ssl_exports():
    ''' Add secure credentials to default user environment configs,
    transparently adding TLS '''
    opts = layer.options('tls-client')

    ca_path = opts['ca_certificate_path']
    client_crt = opts['client_certificate_path']
    client_key = opts['client_key_path']

    evars = ['export ETCDCTL_KEY_FILE={}\n'.format(client_key),
             'export ETCDCTL_CERT_FILE={}\n'.format(client_crt),
             'export ETCDCTL_CA_FILE={}\n'.format(ca_path)]

    with open('/home/ubuntu/.bash_aliases', 'w') as fp:
        fp.writelines(evars)
    with open('/root/.bash_aliases', 'w') as fp:
        fp.writelines(evars)
    set_state('etcd.pillowmints')


@hook('cluster-relation-broken')
def perform_self_unregistration(cluster=None):
    ''' Attempt self removal during unit teardown. '''
    etcdctl = EtcdCtl()
    leader_address = leader_get('leader_address')
    unit_name = os.getenv('JUJU_UNIT_NAME').replace('/', '')
    members = etcdctl.member_list()
    # Self Unregistration
    etcdctl.unregister(members[unit_name]['unit_id'], leader_address)


@hook('data-storage-attached')
def format_and_mount_storage():
    ''' This allows users to request persistent volumes from the cloud provider
    for the purposes of disaster recovery. '''
    set_state('data.volume.attached')
    # Query juju for the information about the block storage
    device_info = storage_get()
    block = device_info['location']
    bag = EtcdDatabag()
    bag.cluster = leader_get('cluster')
    # the databag has behavior that keeps the path updated.
    # Reference the default path from layer_options.
    etcd_opts = layer.options('etcd')
    # Split the tail of the path to mount the volume 1 level before
    # the data directory.
    tail = os.path.split(bag.etcd_data_dir)[0]

    if volume_is_mounted(block):
        hookenv.log('Device is already attached to the system.')
        hookenv.log('Refusing to take action against {}'.format(block))
        return

    # Format the device in non-interactive mode
    cmd = ['mkfs.ext4', device_info['location'], '-F']
    hookenv.log('Creating filesystem on {}'.format(device_info['location']))
    hookenv.log('With command: {}'.format(' '.join(cmd)))
    check_call(cmd)

    # halt etcd to perform the data-store migration
    host.service_stop(bag.etcd_daemon)

    os.makedirs(tail, exist_ok=True)
    mount_volume(block, tail)
    # handle first run during early-attach storage, pre-config-changed hook.
    os.makedirs(bag.etcd_data_dir, exist_ok=True)

    # Only attempt migration if directory exists
    if os.path.isdir(etcd_opts['etcd_data_dir']):
        migrate_path = "{}/".format(etcd_opts['etcd_data_dir'])
        output_path = "{}/".format(bag.etcd_data_dir)
        cmd = ['rsync', '-azp', migrate_path, output_path]

        hookenv.log('Detected existing data, migrating to new location.')
        hookenv.log('With command: {}'.format(' '.join(cmd)))

        check_call(cmd)

    with open('/etc/fstab', 'r') as fp:
        contents = fp.readlines()

    found = 0
    # scan fstab for the device
    for line in contents:
        if block in line:
            found = found + 1

    # if device not in fstab, append so it persists through reboots
    if not found > 0:
        append = "{0} {1} ext4 defaults 0 0".format(block, tail)  # noqa
        with open('/etc/fstab', 'a') as fp:
            fp.writelines([append])

    # Finally re-render the configuration and resume operation
    render_config(bag)
    host.service_restart(bag.etcd_daemon)


def read_tls_cert(cert):
    ''' Reads the contents of the layer-configured certificate path indicated
    by cert. Returns the utf-8 decoded contents of the file '''
    # Load the layer options for configured paths
    opts = layer.options('tls-client')

    # Retain a dict of the certificate paths
    cert_paths = {'ca.crt': opts['ca_certificate_path'],
                  'server.crt': opts['server_certificate_path'],
                  'server.key': opts['server_key_path'],
                  'client.crt': opts['client_certificate_path'],
                  'client.key': opts['client_key_path']}

    # If requesting a cert we dont know about, raise a ValueError
    if cert not in cert_paths.keys():
        raise ValueError('No known certificate {}'.format(cert))

    # Read the contents of the cert and return it in utf-8 encoded text
    with open(cert_paths[cert], 'r') as fp:
        data = fp.read()
        return data


@when('nrpe-external-master.available')
@when_not('nrpe-external-master.initial-config')
def initial_nrpe_config(nagios=None):
    set_state('nrpe-external-master.initial-config')
    update_nrpe_config(nagios)


@when('etcd.installed')
@when('nrpe-external-master.available')
@when_any('config.changed.nagios_context',
          'config.changed.nagios_servicegroups')
def update_nrpe_config(unused=None):
    # List of systemd services that will be checked
    services = ('snap.etcd.etcd',)

    # The current nrpe-external-master interface doesn't handle a lot of logic,
    # use the charm-helpers code for now.
    hostname = nrpe.get_nagios_hostname()
    current_unit = nrpe.get_nagios_unit_name()
    nrpe_setup = nrpe.NRPE(hostname=hostname, primary=False)
    nrpe.add_init_service_checks(nrpe_setup, services, current_unit)
    nrpe_setup.write()


@when_not('nrpe-external-master.available')
@when('nrpe-external-master.initial-config')
def remove_nrpe_config(nagios=None):
    remove_state('nrpe-external-master.initial-config')

    # List of systemd services for which the checks will be removed
    services = ('snap.etcd.etcd',)

    # The current nrpe-external-master interface doesn't handle a lot of logic,
    # use the charm-helpers code for now.
    hostname = nrpe.get_nagios_hostname()
    nrpe_setup = nrpe.NRPE(hostname=hostname, primary=False)

    for service in services:
        nrpe_setup.remove_check(shortname=service)


def volume_is_mounted(volume):
    ''' Takes a hardware path and returns true/false if it is mounted '''
    cmd = ['df', '-t', 'ext4']
    out = check_output(cmd).decode('utf-8')
    return volume in out


def mount_volume(volume, location):
    ''' Takes a device path and mounts it to location '''
    cmd = ['mount', volume, location]
    hookenv.log("Mounting {0} to {1}".format(volume, location))
    check_call(cmd)


def unmount_path(location):
    ''' Unmounts a mounted volume at path '''
    cmd = ['umount', location]
    hookenv.log("Unmounting {0}".format(location))
    check_call(cmd)


def close_open_ports():
    ''' Close the previous port and open the port from configuration. '''
    configuration = hookenv.config()
    previous_port = configuration.previous('port')
    port = configuration.get('port')
    if previous_port is not None and previous_port != port:
        log('The port changed; closing {0} opening {1}'.format(previous_port,
            port))
        close_port(previous_port)
        open_port(port)


def install(src, tgt):
    ''' This method wraps the bash "install" command '''
    return check_call(split('install {} {}'.format(src, tgt)))


def render_config(bag=None):
    ''' Render the etcd configuration template for the given version '''
    if not bag:
        bag = EtcdDatabag()

    # probe for 2.x compatibility
    if etcd_version().startswith('2.'):
        conf_path = "{}/etcd.conf".format(bag.etcd_conf_dir)
        render('etcd2.conf', conf_path, bag.__dict__, owner='root',
               group='root')
    # default to 3.x template behavior
    else:
        conf_path = "{}/etcd.conf.yml".format(bag.etcd_conf_dir)
        render('etcd3.conf', conf_path, bag.__dict__, owner='root',
               group='root')
    # Close the previous client port and open the new one.


def etcd_version():
    ''' This method surfaces the version from etcdctl '''
    cmd = ['/snap/bin/etcd.etcdctl', '--version']
    try:
        raw_output = check_output(cmd)
        lines = raw_output.split(b'\n')
        for line in lines:
            if b'etcdctl version' in line:
                # etcdctl version: 3.0.17
                # Strip and massage the output
                version = str(line, 'utf-8')
                version = version.split('version')[-1].replace(':', '').strip()
                return version
        return 'n/a'
    except:
        return 'n/a'