ruby-prof is a fast code profiler for Ruby. Its features include:
Speed - it is a C extension and therefore many times faster than the standard Ruby profiler.
Modes - Ruby prof can measure a number of different parameters, including call times, memory usage and object allocations.
Reports - can generate text and cross-referenced html reports
Flat Profiles - similar to the reports generated by the standard Ruby profiler
Graph profiles - similar to GProf, these show how long a method runs, which methods call it and which methods it calls.
Call tree profiles - outputs results in the calltree format suitable for the KCacheGrind profiling tool.
Threads - supports profiling multiple threads simultaneously
ruby-prof requires Ruby 1.8.4 or higher.
If you are running Linux or Unix you'll need a C compiler so the extension can be compiled when it is installed.
If you are running Windows, then you may need to install the Windows specific RubyGem which includes an already built extension (see below).
The easiest way to install ruby-prof is by using Ruby Gems. To install:
gem install ruby-prof
If you on windows mswin [not mingw] (check via ruby -v) and don't have an MSVC compiler, please install v0.7.3 which has a prebuilt binary C:> gem install ruby-prof -v0.7.3
If you're on mingw, please install the devkit first, then install the latest version (gem install ruby-prof).
There are three ways of running ruby-prof.
The first is to use ruby-prof to run the Ruby program you want to profile. For more information refer to the documentation of the ruby-prof command.
The second way is to use the ruby-prof API to profile particular segments of code.
require 'ruby-prof' # Profile the code RubyProf.start ... [code to profile] ... result = RubyProf.stop # Print a flat profile to text printer = RubyProf::FlatPrinter.new(result) printer.print(STDOUT)
Alternatively, you can use a block to tell ruby-prof what to profile:
require 'ruby-prof' # Profile the code result = RubyProf.profile do ... [code to profile] ... end # Print a graph profile to text printer = RubyProf::GraphPrinter.new(result) printer.print(STDOUT, 0)
Starting with the 0.6.1 release, ruby-prof also supports pausing and resuming profiling runs.
require 'ruby-prof' # Profile the code RubyProf.start [code to profile] RubyProf.pause [other code] RubyProf.resume [code to profile] result = RubyProf.stop
Note that resume will automatically call start if a profiling run has not yet started. In addition, resume can also take a block:
require 'ruby-prof' # Profile the code RubyProf.resume do [code to profile] end data = RubyProf.stop
With this usage, resume will automatically call pause at the end of the block.
The third way of using ruby-prof is by requiring unprof.rb:
This will start profiling immediately and will output the results using a flat profile report.
This method is provided for backwards compatibility. Using the ruby-prof command provides more flexibility.
Starting with release 0.9.0, ruby-prof supports eliminating methods from profiling results. This is useful for reducing connectivity in the call graph, making it easier to identify the source of performance problems when using a graph printer.
For example, consider Integer#times: it's hardly ever useful to know how much time is spent in the method itself. We're much more interested in how much the passed in block contributes to the time spent in the method which contains the Integer#times call.
Methods are eliminated from the collected data by calling `eliminate_methods!` on the profiling result, before submitting it to a printer.
result = RubyProf.stop result.eliminate_methods!([/Integer#times/])
The argument given to `eliminate_methods!` is either an array of regular expressions, or the name of a file containing a list of regular expressions (line separated text).
After eliminating methods the resulting profile will appear exactly as if those methods had been inlined at their call sites.
Starting with the 0.6.1 release, ruby-prof supports profiling tests cases written using Ruby's built-in unit test framework (ie, test derived from Test::Unit::TestCase). To enable profiling simply add the following line of code to within your test class:
Each test method is profiled separately. ruby-prof will run each test method once as a warmup and then ten additional times to gather profile data. Note that the profile data will not include the class's setup or teardown methods.
Separate reports are generated for each method and saved, by default, in the test process's working directory. To change this, or other profiling options, modify your test class's PROFILE_OPTIONS hash table. To globally change test profiling options, modify RubyProf::Test::PROFILE_OPTIONS.
To profile a Rails application it is vital to run it using production like settings (cache classes, cache view lookups, etc.). Otherwise, Rail's dependency loading code will overwhelm any time spent in the application itself (our tests show that Rails dependency loading causes a roughly 6x slowdown). The best way to do this is create a new Rails environment, profile.rb.
So to profile Rails:
Create a new profile.rb environment - or simply copy the example file in ruby-prof/rails/environment/profile.rb
Copy the file:
Create a new test directory for profiling:
Write unit, functional or integration tests specifically designed to profile some part of your Rails application. At the top of each test, replace this line:
require File.dirname(__FILE__) + '/../test_helper'
require File.dirname(__FILE__) + '/../profile_test_helper'
require File.dirname(__FILE__) + '/../profile_test_helper'
class ExampleTest < Test::Unit::TestCase
include RubyProf::Test fixtures .... def test_stuff puts "Test method" end
Now run your tests. Results will be written to:
ruby-prof can generate a number of different reports:
HTML Graph Reports
Call stack reports
Flat profiles show the overall time spent in each method. They are a good of quickly identifying which methods take the most time. An example of a flat profile and an explanation can be found in examples/flat.txt.
Graph profiles also show the overall time spent in each method. In addition, they also show which methods call the current method and which methods its calls. Thus they are good for understanding how methods gets called and provide insight into the flow of your program. An example text graph profile is located at examples/graph.txt.
HTML Graph profiles are the same as graph profiles, except output is generated in hyper-linked HTML. Since graph profiles can be quite large, the embedded links make it much easier to navigate the results. An example html graph profile is located at examples/graph.html.
Call graphs output results in the calltree profile format which is used by KCachegrind. Call graph support was generously donated by Carl Shimer. More information about the format can be found at the KCachegrind site.
Call stack reports produce a HTML visualization of the time spent in each execution path of the profiled code. An example can be found at examples/stack.html.
Finally, there's a so called MultiPrinter which can generate several reports in one profiling run. See examples/multi.stack.html.
Reports are created by printers. Supported printers include:
RubyProf::FlatPrinter - Creates a flat report in text format
RubyProf::FlatPrinterWithLineNumbers - same as above but more verbose
RubyProf::GraphPrinter - Creates a call graph report in text format
RubyProf::GraphHtmlPrinter - Creates a call graph report in HTML (separate files per thread)
RubyProf::DotPrinter - Creates a call graph report in GraphViz's DOT format which can be converted to an image
RubyProf::CallTreePrinter - Creates a call tree report compatible with KCachegrind.
RubyProf::CallStackPrinter - Creates a HTML visualization of the Ruby stack
RubyProf::MultiPrinter - Uses the other printers to create several reports in one profiling run
To use a printer:
... result = RubyProf.end printer = RubyProf::GraphPrinter.new(result) printer.print(STDOUT, :min_percent => 2)
The first parameter is any writable IO object such as STDOUT or a file. The second parameter, specifies the minimum percentage a method must take to be printed. Percentages should be specified as integers in the range 0 to 100. For more information please see the documentation for the different printers.
The other option is :print_file => true (default false), which adds the filename to the output (GraphPrinter only).
The MultiPrinter differs from the other printers in that it requires a directory path and a basename for the files it produces.
printer = RubyProf::MultiPrinter.new(result) printer.print(:path => ".", :profile => "profile")
Depending on the mode and platform, ruby-prof can measure various aspects of a Ruby program. Supported measurements include:
process time (RubyProf::PROCESS_TIME)
wall time (RubyProf::WALL_TIME)
cpu time (RubyProf::CPU_TIME)
object allocations (RubyProf::ALLOCATIONS)
memory usage (RubyProf::MEMORY)
garbage collections runs (RubyProf::GC_RUNS)
garbage collection time (RubyProf::GC_TIME)
Process time measures the time used by a process between any two moments. It is unaffected by other processes concurrently running on the system. Note that Windows does not support measuring process times - therefore, measurements on Windows defaults to wall time.
Wall time measures the real-world time elapsed between any two moments. If there are other processes concurrently running on the system that use significant CPU or disk time during a profiling run then the reported results will be too large.
CPU time uses the CPU clock counter to measure time. The returned values are dependent on the correctly setting the CPU's frequency. This mode is only supported on Pentium or PowerPC platforms (linux only).
Object allocation reports show how many objects each method in a program allocates. This support was added by Sylvain Joyeux and requires a patched Ruby interpreter. For more information and the patch, please see: rubyforge.org/tracker/index.php?func=detail&aid=11497&group_id=426&atid=1700
Memory usage reports show how much memory each method in a program uses. This support was added by Alexander Dymo and requires a patched Ruby interpreter. For more information, see: rubyforge.org/tracker/index.php?func=detail&aid=17676&group_id=1814&atid=7062
Garbage collection runs report how many times Ruby's garbage collector is invoked during a profiling session. This support was added by Jeremy Kemper and requires a patched Ruby interpreter. For more information, see: rubyforge.org/tracker/index.php?func=detail&aid=17676&group_id=1814&atid=7062
Garbage collection time reports how much time is spent in Ruby's garbage collector during a profiling session. This support was added by Jeremy Kemper and requires a patched Ruby interpreter. For more information, see: rubyforge.org/tracker/index.php?func=detail&aid=17676&group_id=1814&atid=7062
To set the measurement:
RubyProf.measure_mode = RubyProf::PROCESS_TIME
RubyProf.measure_mode = RubyProf::WALL_TIME
RubyProf.measure_mode = RubyProf::CPU_TIME
RubyProf.measure_mode = RubyProf::ALLOCATIONS
RubyProf.measure_mode = RubyProf::MEMORY
RubyProf.measure_mode = RubyProf::GC_RUNS
RubyProf.measure_mode = RubyProf::GC_TIME
The default value is RubyProf::PROCESS_TIME.
You may also specify the measure_mode by using the RUBY_PROF_MEASURE_MODE environment variable:
Note that these values have changed since ruby-prof-0.3.0.
On Linux, process time is measured using the clock method provided by the C runtime library. Note that the clock method does not report time spent in the kernel or child processes and therefore does not measure time spent in methods such as Kernel.sleep method. If you need to measure these values, then use wall time. Wall time is measured using the gettimeofday kernel method.
On Windows, timings default to wall times. If you set the clock mode to PROCESS_TIME, then timing are read using the clock method provided by the C runtime library. Note though, these values are wall times on Windows and not process times like on Linux. Wall time is measured using the GetLocalTime API.
If you use wall time, the results will be affected by other processes running on your computer, network delays, disk access, etc. As result, for the best results, try to make sure your computer is only performing your profiling run and is otherwise quiescent.
On both platforms, cpu time is measured using the RDTSC assembly function provided by the Pentium and PowerPC platforms. CPU time is dependent on the cpu's frequency. On Linux, ruby-prof attempts to read this value from “/proc/cpuinfo.” On Windows, you must manually specify the clock frequency. This can be done using the RUBY_PROF_CPU_FREQUENCY environment variable:
You can also directly set the cpu frequency by calling:
RubyProf.cpu_frequency = <value>
Unfortunately, Ruby does not provide an internal api for detecting thread context switches in 1.8. As a result, the timings ruby-prof reports for each thread may be slightly inaccurate. In particular, this will happen for newly spawned threads that go to sleep immediately (their first call). For instance, if you use Ruby's timeout library to wait for 2 seconds, the 2 seconds will be assigned to the foreground thread and not the newly created background thread. These errors can largely be avoided if the background thread performs any operation before going to sleep.
Significant effort has been put into reducing ruby-prof's overhead as much as possible. Our tests show that the overhead associated with profiling code varies considerably with the code being profiled. Most programs will run approximately twice as slow while highly recursive programs (like the fibonacci series test) will run three times slower.
Because of some threading difficulties in 1.9, it currently runs a bit slower there. www.ruby-forum.com/topic/201329
See LICENSE for license information.
Code is located at github.com/rdp/ruby-prof