mihini-greenhouse-demo

The SimpleModbusSlaveExample Arduino sketch enables a Modbus slave on an Arduino board. It depends on the simple-modbus Arduino library that you need to download from [here] (https://code.google.com/p/simple-modbus/downloads/list) and install in your Arduino environment.

When running, the sketch will expose the following Modbus holding registers on its serial port:

• #00 - A0 (analog input)
• #01 - A1 (analog input)
• #02 - A2 (analog input)
• #03 - A3 (analog input)
• #04 - A4 (analog input)
• #05 - A5 (analog input)
• #06 - D2 (digital output)
• #07 - D3 (digital output)
• #08 - D4 (digital output)
• #09 - D5 (digital output)
• #10 - D6 (digital output)
• #11 - D7 (digital output)
• #12 - D8 (digital input)
• #13 - D9 (digital input)
• #14 - D10 (digital input)
• #15 - D11 (digital input)
• #16 - D12 (digital input)
• #17 - D13 SERVO (digital output, write 1 or 0 for opening or closing the servo)
• #18 - # of errors (input)

See http://git.eclipse.org/c/mihini/org.eclipse.mihini.samples.git/ for Mihini and Corona apps