Skip to content
Fetching contributors…
Cannot retrieve contributors at this time
120 lines (94 sloc) 4.22 KB
Installation procedure - FreeBSD 3.3
KAME project
$Id: INSTALL,v 1.9 1999/10/06 06:52:01 k-sugyou Exp $
You'll need to follow the steps below. They can be separated into two major
sections - kernel build and userland build.
Be sure to perform "tree preparation" procedure, described in
../INSTALL, prior to taking the steps below.
A. Backup
The following procedure replaces, or overwrites, the following
so you may want to back them up before going through the steps.
A-1. Backup your kernel file, if you need to.
# cp /kernel /kernel.previous
A-2. Backup /usr/include directory, if you want an untouched tree to be
preserved somewhere.
# cd /usr
# mkdir include.clean
# cd include.clean
# (cd ../include; tar Bpcf - . ) | tar Bpxf -
B. Kernel build
Consult FreeBSD documentations for more detail.
B-1. Go down to sys/i386/conf.
% cd sys/i386/conf
B-2. Make a kernel configuration file, and invoke "/usr/sbin/config CONFIGFILE".
GENERIC.v6 should have commonly used IPv6 definitions, so you may want to
copy the file to begin with.
% /usr/sbin/config CONFIGFILE
B-3. Build the kernel. The process will make kernel file named "kernel".
% cd ../../compile/CONFIGFILE
% make depend
% make
B-4. Install the kernel file to root directory, as root.
# make install
C. Userland build
C-1. Invoke "make includes" as normal user, then "make install-includes"
as root. This will populate KAME-ready include files into /usr/include.
% make includes
# make install-includes
C-2. As normal user (or root, if you prefer) perform "make".
% make
C-3. As root, perform "make install". This will install necessary userland
tools into /usr/local/v6/{bin,sbin,whatever}. This should not replace
existing IPv4-only userland tools, so it is safe.
# make install
D. Reboot
D-1. Reboot with the command you like.
# fastboot
E. Configurations, in short
E-1. Most of configuration files are placed in /usr/local/v6/etc.
You may want to copy those foo.sample files into non-sample (foo),
edit as necessary. You may also want to invoke /usr/local/v6/etc/rc.net6
from /etc/rc.local, by adding the following into /etc/rc.local:
if [ -f /usr/local/v6/etc/rc.net6 ]; then
sh /usr/local/v6/etc/rc.net6
E-2. If you would like to use IPv6-ready inetd, you will need to also invoke
It can coexist with original /usr/sbin/inetd, but when each of them is
invoked, IPv4 connection accept is always treated by /usr/sbin/inetd.
When only /usr/local/v6/sbin/inet46d is invoked, it accept each of
IPv4 and IPv6 connection request.
Configuration file is placed in /usr/local/v6/etc/inet6d.conf, but with
enhanced syntax. Inet46d accepts either of IPv4 and IPv6 connection by
default, but you can configure it to accept only one of those protocols
by each daemon basis. Consult manpages for details.
E-3. Commands modified by KAME project are placed in /usr/local/v6/{bin,sbin}.
For daily use, you will need to add both of (or either of) them
into your command search path (consult manpage for your favorite
shell). Make sure to make them used before /usr/bin or /usr/sbin,
otherwise you end up using OS-supplied (hence not IPv6 nor IPsec capable)
E-4. There are batch of documents installed into /usr/local/v6/man
and /usr/local/v6/share/doc. Please read them as necessary.
If you wish to develop your own programs, we suggest you to read through
supplied documents, RFCs, and other documents to learn how.
F. PAO3 issues
Many of FreeBSD32 users install PAO3 PCMCIA support code. If you would like
to use both PAO3 and KAME, you'll need to apply PAO3 patches onto KAME tree.
However, there are tricky things:
- KAME code is based on FreeBSD 3.3-RELEASE, and it has several ALTQ
related patch in driver code.
- PAO code is based on FreeBSD 3.3-STABLE on some specific date,
and it has bunch of driver fixes.
As both parties try to modify driver code, and they use different codebase
as starting point, there can be conflicts during patch operation.
You need to fix those patch conflicts manually.
Something went wrong with that request. Please try again.