Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with HTTPS or Subversion.

Download ZIP
tag: netbsd_snap_20…
Fetching contributors…

Cannot retrieve contributors at this time

128 lines (98 sloc) 4.491 kb
Installation procedure - FreeBSD 3.5
KAME project
$Id: INSTALL,v 1.16 2001/02/10 05:17:09 itojun Exp $
You'll need to follow the steps below. They can be separated into two major
sections - kernel build and userland build.
Be sure to perform "tree preparation" procedure, described in
../INSTALL, prior to taking the steps below.
Note that, KAME/FreeBSD 3.5 has reached its end of life. We supply it for
reference purposes only. The tree may not compile at all.
Use newer BSD official releases, or KAME kit on more recent BSD releases.
A. Backup
=========
The following procedure replaces, or overwrites, the following
files/directories:
/kernel
/usr/include
so you may want to back them up before going through the steps.
A-1. Backup your kernel file, if you need to.
# cp /kernel /kernel.previous
A-2. Backup /usr/include directory, if you want an untouched tree to be
preserved somewhere.
# cd /usr
# mkdir include.clean
# cd include.clean
# (cd ../include; tar Bpcf - . ) | tar Bpxf -
B. Kernel build
===============
Consult FreeBSD documentations for more detail.
B-0. It is assumed that you are in platform-specific directory (kame/freebsd3).
If you are not, chdir to there.
B-1. Go down to sys/i386/conf.
% cd sys/i386/conf
B-2. Make a kernel configuration file, and invoke "/usr/sbin/config CONFIGFILE".
GENERIC.v6 should have commonly used IPv6 definitions, so you may want to
copy the file to begin with.
% cp GENERIC.v6 CONFIGFILE
% vi CONFIGFILE
% /usr/sbin/config CONFIGFILE
B-3. Build the kernel. The process will make kernel file named "kernel".
% cd ../../compile/CONFIGFILE
% make depend
% make
B-4. Install the kernel file to root directory, as root.
# make install
C. Userland build
=================
C-0. It is assumed that you are in platform-specific directory (kame/freebsd3).
If you are not, chdir to there.
C-1. Invoke "make includes" as normal user, then "make install-includes"
as root. This will populate KAME-ready include files into /usr/include.
% make includes
# make install-includes
C-2. As normal user (or root, if you prefer) perform "make".
% make
C-3. As root, perform "make install". This will install necessary userland
tools into /usr/local/v6/{bin,sbin,whatever}. This should not replace
existing IPv4-only userland tools, so it is safe.
# make install
D. Reboot
=========
D-1. Reboot with the command you like.
# fastboot
E. Configurations, in short
===========================
E-1. Most of configuration files are placed in /usr/local/v6/etc.
You may want to copy those foo.sample files into non-sample (foo),
edit as necessary. You may also want to invoke /usr/local/v6/etc/rc.net6
from /etc/rc.local, by adding the following into /etc/rc.local:
if [ -f /usr/local/v6/etc/rc.net6 ]; then
sh /usr/local/v6/etc/rc.net6
fi
E-2. If you would like to use IPv6-ready inetd, you will need to also invoke
/usr/local/v6/sbin/inet46d.
It can coexist with original /usr/sbin/inetd, but when both of them are
invoked, IPv4 connection accept is always treated by /usr/sbin/inetd.
When only /usr/local/v6/sbin/inet46d is invoked, it accepts each of
IPv4 and IPv6 connection request.
Configuration file is placed in /usr/local/v6/etc/inet6d.conf, but with
enhanced syntax. Inet46d accepts either of IPv4 and IPv6 connection by
default, but you can configure it to accept only one of those protocols
by each daemon basis. Consult manpages for details.
E-3. If you wish to use ALTQ, you may need to invoke /dev/MAKEDEV.altq.
# cd /dev
# sh MAKEDEV.altq all
E-4. Commands modified by KAME project are placed in /usr/local/v6/{bin,sbin}.
For daily use, you will need to add both of (or either of) them
into your command search path (consult manpage for your favorite
shell). Make sure to make them used before /usr/bin or /usr/sbin,
otherwise you end up using OS-supplied (hence not IPv6 nor IPsec capable)
commands.
E-5. There are batch of documents installed into /usr/local/v6/man
and /usr/local/v6/share/doc. Please read them as necessary.
If you wish to develop your own programs, we suggest you to read through
supplied documents, RFCs, and other documents to learn how.
F. PAO3 issues
=============
Many of FreeBSD3.x users install PAO3 PCMCIA support code. If you would like
to use both PAO3 and KAME, you'll need to apply PAO3 patches onto KAME tree.
Jump to Line
Something went wrong with that request. Please try again.