Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with
or
.
Download ZIP
Fetching contributors…

Cannot retrieve contributors at this time

218 lines (158 sloc) 5.473 kB
/** @defgroup STM32F1xx-pwr-file PWR
@ingroup STM32F1xx
@brief <b>libopencm3 STM32F1xx Power Control</b>
@version 1.0.0
@author @htmlonly &copy; @endhtmlonly 2012 Ken Sarkies <ksarkies@internode.on.net>
@date 18 August 2012
This library supports the power control system for the
STM32F1 series of ARM Cortex Microcontrollers by ST Microelectronics.
LGPL License Terms @ref lgpl_license
*/
/*
* This file is part of the libopencm3 project.
*
* Copyright (C) 2012 Ken Sarkies <ksarkies@internode.on.net>
*
* This library is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this library. If not, see <http://www.gnu.org/licenses/>.
*/
/**@{*/
#include <libopencm3/stm32/pwr.h>
/*---------------------------------------------------------------------------*/
/** @brief Disable Backup Domain Write Protection.
This allows backup domain registers to be changed. These registers are write
protected after a reset.
*/
void pwr_disable_backup_domain_write_protect(void)
{
PWR_CR |= PWR_CR_DBP;
}
/*---------------------------------------------------------------------------*/
/** @brief Re-enable Backup Domain Write Protection.
This protects backup domain registers from inadvertent change.
*/
void pwr_enable_backup_domain_write_protect(void)
{
PWR_CR &= ~PWR_CR_DBP;
}
/*---------------------------------------------------------------------------*/
/** @brief Enable Power Voltage Detector.
This provides voltage level threshold detection. The result of detection is
provided in the power voltage detector output flag (see @ref pwr_voltage_high)
or by setting the EXTI16 interrupt (see datasheet for configuration details).
@param[in] pvd_level u32. Taken from @ref pwr_pls.
*/
void pwr_enable_power_voltage_detect(u32 pvd_level)
{
PWR_CR &= ~PWR_CR_PLS_MASK;
PWR_CR |= (PWR_CR_PVDE | pvd_level);
}
/*---------------------------------------------------------------------------*/
/** @brief Disable Power Voltage Detector.
*/
void pwr_disable_power_voltage_detect(void)
{
PWR_CR &= ~PWR_CR_PVDE;
}
/*---------------------------------------------------------------------------*/
/** @brief Clear the Standby Flag.
This is set when the processor returns from a standby mode.
*/
void pwr_clear_standby_flag(void)
{
PWR_CR |= PWR_CR_CSBF;
}
/*---------------------------------------------------------------------------*/
/** @brief Clear the Wakeup Flag.
This is set when the processor receives a wakeup signal.
*/
void pwr_clear_wakeup_flag(void)
{
PWR_CR |= PWR_CR_CWUF;
}
/*---------------------------------------------------------------------------*/
/** @brief Set Standby Mode in Deep Sleep.
*/
void pwr_set_standby_mode(void)
{
PWR_CR |= PWR_CR_PDDS;
}
/*---------------------------------------------------------------------------*/
/** @brief Set Stop Mode in Deep Sleep.
*/
void pwr_set_stop_mode(void)
{
PWR_CR &= ~PWR_CR_PDDS;
}
/*---------------------------------------------------------------------------*/
/** @brief Voltage Regulator On in Stop Mode.
*/
void pwr_voltage_regulator_on_in_stop(void)
{
PWR_CR &= ~PWR_CR_LPDS;
}
/*---------------------------------------------------------------------------*/
/** @brief Voltage Regulator Low Power in Stop Mode.
*/
void pwr_voltage_regulator_low_power_in_stop(void)
{
PWR_CR |= PWR_CR_LPDS;
}
/*---------------------------------------------------------------------------*/
/** @brief Enable Wakeup Pin.
The wakeup pin is used for waking the processor from standby mode.
*/
void pwr_enable_wakeup_pin(void)
{
PWR_CSR |= PWR_CSR_EWUP;
}
/*---------------------------------------------------------------------------*/
/** @brief Release Wakeup Pin.
The wakeup pin is used for general purpose I/O.
*/
void pwr_disable_wakeup_pin(void)
{
PWR_CSR &= ~PWR_CSR_EWUP;
}
/*---------------------------------------------------------------------------*/
/** @brief Get Voltage Detector Output.
The voltage detector threshold must be set when the power voltage detector is
enabled, see @ref pwr_enable_power_voltage_detect.
@returns boolean: TRUE if the power voltage is above the preset voltage
threshold.
*/
bool pwr_voltage_high(void)
{
return (PWR_CSR & PWR_CSR_PVDO);
}
/*---------------------------------------------------------------------------*/
/** @brief Get Standby Flag.
The standby flag is set when the processor returns from a standby state. It is
cleared by software (see @ref pwr_clear_standby_flag).
@returns boolean: TRUE if the processor was in standby state.
*/
bool pwr_get_standby_flag(void)
{
return (PWR_CSR & PWR_CSR_SBF);
}
/*---------------------------------------------------------------------------*/
/** @brief Get Wakeup Flag.
The wakeup flag is set when a wakeup event has been received. It is
cleared by software (see @ref pwr_clear_wakeup_flag).
@returns boolean: TRUE if a wakeup event was received.
*/
bool pwr_get_wakeup_flag(void)
{
return (PWR_CSR & PWR_CSR_WUF);
}
/**@}*/
Jump to Line
Something went wrong with that request. Please try again.