Releases: keirf/flashfloppy
Releases · keirf/flashfloppy
FlashFloppy 3.42
- HFEv3: Various read/write improvements
- WDATA: Merge short write pulses, and apply de-jitter/precomp
- IMG, EDSK: Stream large sector writes to flash
FlashFloppy 3.41
- AT32F415: Fix timer handling since clock speed increase (v3.39).
- LCD: Faster power-on initialisation. Don't wait for display to clear.
FlashFloppy 3.40
- XDF: Fix writes to side 1 of XDF disk images
- HFE: Better handling of long No Flux Areas
- QuickDisk: Reduce motor spinup time to 1 second (previously 2 seconds)
- LCD: Completely blank display when backlight is off
FlashFloppy 3.39
- AT32F415: Run this MCU at 144MHz (previously 72MHz).
- HFE: Fix HFEv3 support. Support Dungeon Master & Chaos Strikes Back.
- IMG.CFG: Support mixed sector sizes per track (Ensoniq Mirage etc).
- IMG.CFG: New option img_bps= allows padding of short sectors in IMG files.
- FF.CFG: New option notify-volume= for notifying on insert/eject events.
- FF.CFG: New OLED display sub-option 'hflip' horizontally flips display.
- Various other small fixes.
FlashFloppy 4.7a
- Contains fixes up to v3.38 from v3 stable release series
FlashFloppy 3.38
- AT32F435: Fix RDATA release on drive deassert
- SF7: Support Sega SF-7000 *.SF7 images
FlashFloppy 3.37
- Amiga: Fix firmware crash when mounting read-only disk image
- Since v3.36 when interface=amiga and motor-delay= is configured
- Amiga: Respect MOTOR when motor-delay= is configured and disk ejected
- Previously the MOTOR signal was ignored when no disk inserted
FlashFloppy 3.36
- AT32F435: Fix SD card handling on boards which support it
- FF.CFG, OSD: New options osd-columns= and osd-display-order=
- Amiga: Improved pin 34 ID/RDY emulation
- Requires AT32F435 MCU and MOR jumper strap
- Requires FF.CFG options: interface=amiga, motor-delay=500
FlashFloppy 3.35
- AT32F435: Fix Quick Disk firmware
FlashFloppy 4.6a
- AUTOBOOT / HxC Mode: Fix "Error ... LBA Change test failed!"