Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with
or
.
Download ZIP
Python 3 port of netifaces
C Python
Branch: master

Fetching latest commit…

Cannot retrieve the latest commit at this time

Failed to load latest commit information.
.gitignore
README
minisix.py
netifaces.c
setup.py

README

(Python 3.x compatibility added by Kevin Kelley <kelleyk@kelleyk.net>.
The functionality of the module should remain unchanged.)

netifaces 0.4
=============

1. What is this?
----------------

It's been annoying me for some time that there's no easy way to get the
address(es) of the machine's network interfaces from Python.  There is
a good reason for this difficulty, which is that it is virtually impossible
to do so in a portable manner.  However, it seems to me that there should
be a package you can easy_install that will take care of working out the
details of doing so on the machine you're using, then you can get on with
writing Python code without concerning yourself with the nitty gritty of
system-dependent low-level networking APIs.

This package attempts to solve that problem.

2. How do I use it?
-------------------

First you need to install it, which you can do by typing

  tar xvzf netifaces-0.4.tar.gz
  cd netifaces-0.4
  python setup.py install

Once that's done, you'll need to start Python and do something like the
following:

  >>> import netifaces

Then if you enter

  >>> netifaces.interfaces()
  ['lo0', 'gif0', 'stf0', 'en0', 'en1', 'fw0']

you'll see the list of interface identifiers for your machine.

You can ask for the addresses of a particular interface by doing

  >>> netifaces.ifaddresses('lo0')
  {18: [{'addr': ''}], 2: [{'peer': '127.0.0.1', 'netmask': '255.0.0.0', 'addr': '127.0.0.1'}], 30: [{'peer': '::1', 'netmask': 'ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff', 'addr': '::1'}, {'peer': '', 'netmask': 'ffff:ffff:ffff:ffff::', 'addr': 'fe80::1%lo0'}]}

Hmmmm.  That result looks a bit cryptic; let's break it apart and explain
what each piece means.  It returned a dictionary, so let's look there first:

  { 18: [...], 2: [...], 30: [...] }

Each of the numbers refers to a particular address family.  In this case, we
have three address families listed; on my system, 18 is AF_LINK (which means
the link layer interface, e.g. Ethernet), 2 is AF_INET (normal Internet
addresses), and 30 is AF_INET6 (IPv6).

But wait!  Don't use these numbers in your code.  The numeric values here are
system dependent; fortunately, I thought of that when writing netifaces, so
the module declares a range of values that you might need.  e.g.

  >>> netifaces.AF_LINK
  18

Again, on your system, the number may be different.

So, what we've established is that the dictionary that's returned has one
entry for each address family for which this interface has an address.  Let's
take a look at the AF_INET addresses now:

  >>> addrs = netifaces.ifaddresses('lo0')
  >>> addrs[netifaces.AF_INET]
  [{'peer': '127.0.0.1', 'netmask': '255.0.0.0', 'addr': '127.0.0.1'}]

You might be wondering why this value is a list.  The reason is that it's
possible for an interface to have more than one address, even within the
same family.  I'll say that again: *you can have more than one address of
the same type associated with each interface*.

*Asking for "the" address of a particular interface doesn't make sense.*

Right, so, we can see that this particular interface only has one address,
and, because it's a loopback interface, it's point-to-point and therefore
has a *peer* address rather than a broadcast address.

Let's look at a more interesting interface.

  >>> addrs = netifaces.ifaddresses('en0')
  >>> addrs[netifaces.AF_INET]
  [{'broadcast': '10.15.255.255', 'netmask': '255.240.0.0', 'addr': '10.0.1.4'}, {'broadcast': '192.168.0.255', 'addr': '192.168.0.47'}]

This interface has two addresses (see, I told you...)  Both of them are
regular IPv4 addresses, although in one case the netmask has been changed
from its default.  The netmask *may not* appear on your system if it's set
to the default for the address range.

Because this interface isn't point-to-point, it also has broadcast addresses.

Now, say we want, instead of the IP addresses, to get the MAC address; that
is, the hardware address of the Ethernet adapter running this interface.  We
can do

  >>> addrs[netifaces.AF_LINK]
  [{'addr': '00:12:34:56:78:9a'}]

Note that this may not be available on platforms without getifaddrs(), unless
they happen to implement SIOCGIFHWADDR.  Note also that you just get the
address; it's unlikely that you'll see anything else with an AF_LINK address.
Oh, and don't assume that all AF_LINK addresses are Ethernet; you might, for
instance, be on a Mac, in which case:

  >>> addrs = netifaces.ifaddresses('fw0')
  >>> addrs[netifaces.AF_LINK]
  [{'addr': '00:12:34:56:78:9a:bc:de'}]

No, that isn't an exceptionally long Ethernet MAC address---it's a FireWire
address.

3. This is great!  What platforms does it work on?
--------------------------------------------------

Well, see, here's the thing.  It's been tested on Mac OS X, and it seems to
work.  (OS X helpfully has some of the SIOCGIFxxx ioctl()s, which means that
most of those have been tested too, the only glaring exception being the
SIOCGIFHWADDR ioctl(), which OS X just doesn't have.)

It should probably work on most of the other UNIX-like systems with relatively
minor changes.  If you do have to change something, send it to me at
<alastair AT alastairs-place.net> and I'll see if I can merge it in.

It also works just fine on Windows, using the GetAdaptersInfo() function.
Note, though, that on Windows it isn't possible (yet) to retrieve IPv6
addresses.  I don't use Windows at the moment, so this isn't a priority for
me.  If you know how to fix it, drop me a line and I'll consider adding any
necessary code.

4. What license is this under?
------------------------------

It's an MIT-style license.  Here goes:

Copyright (c) 2007, 2008 Alastair Houghton

Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all
copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
SOFTWARE.
Something went wrong with that request. Please try again.