Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with HTTPS or Subversion.

Download ZIP
Fetching contributors…

Cannot retrieve contributors at this time

1318 lines (1061 sloc) 43.384 kb
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 14
EXTRAVERSION =-rc2
NAME=Affluent Albatross
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"
# More info can be located in ./README
# Comments in this file are targeted only to the developer, do not
# expect to learn how to build the kernel reading this file.
# Do not print "Entering directory ..."
MAKEFLAGS += --no-print-directory
# We are using a recursive build, so we need to do a little thinking
# to get the ordering right.
#
# Most importantly: sub-Makefiles should only ever modify files in
# their own directory. If in some directory we have a dependency on
# a file in another dir (which doesn't happen often, but it's often
# unavoidable when linking the built-in.o targets which finally
# turn into vmlinux), we will call a sub make in that other dir, and
# after that we are sure that everything which is in that other dir
# is now up to date.
#
# The only cases where we need to modify files which have global
# effects are thus separated out and done before the recursive
# descending is started. They are now explicitly listed as the
# prepare rule.
# To put more focus on warnings, be less verbose as default
# Use 'make V=1' to see the full commands
ifdef V
ifeq ("$(origin V)", "command line")
KBUILD_VERBOSE = $(V)
endif
endif
ifndef KBUILD_VERBOSE
KBUILD_VERBOSE = 0
endif
# Call sparse as part of compilation of C files
# Use 'make C=1' to enable sparse checking
ifdef C
ifeq ("$(origin C)", "command line")
KBUILD_CHECKSRC = $(C)
endif
endif
ifndef KBUILD_CHECKSRC
KBUILD_CHECKSRC = 0
endif
# Use make M=dir to specify directory of external module to build
# Old syntax make ... SUBDIRS=$PWD is still supported
# Setting the environment variable KBUILD_EXTMOD take precedence
ifdef SUBDIRS
KBUILD_EXTMOD ?= $(SUBDIRS)
endif
ifdef M
ifeq ("$(origin M)", "command line")
KBUILD_EXTMOD := $(M)
endif
endif
# kbuild supports saving output files in a separate directory.
# To locate output files in a separate directory two syntaxes are supported.
# In both cases the working directory must be the root of the kernel src.
# 1) O=
# Use "make O=dir/to/store/output/files/"
#
# 2) Set KBUILD_OUTPUT
# Set the environment variable KBUILD_OUTPUT to point to the directory
# where the output files shall be placed.
# export KBUILD_OUTPUT=dir/to/store/output/files/
# make
#
# The O= assignment takes precedence over the KBUILD_OUTPUT environment
# variable.
# KBUILD_SRC is set on invocation of make in OBJ directory
# KBUILD_SRC is not intended to be used by the regular user (for now)
ifeq ($(KBUILD_SRC),)
# OK, Make called in directory where kernel src resides
# Do we want to locate output files in a separate directory?
ifdef O
ifeq ("$(origin O)", "command line")
KBUILD_OUTPUT := $(O)
endif
endif
# That's our default target when none is given on the command line
.PHONY: _all
_all:
ifneq ($(KBUILD_OUTPUT),)
# Invoke a second make in the output directory, passing relevant variables
# check that the output directory actually exists
saved-output := $(KBUILD_OUTPUT)
KBUILD_OUTPUT := $(shell cd $(KBUILD_OUTPUT) && /bin/pwd)
$(if $(KBUILD_OUTPUT),, \
$(error output directory "$(saved-output)" does not exist))
.PHONY: $(MAKECMDGOALS)
$(filter-out _all,$(MAKECMDGOALS)) _all:
$(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \
KBUILD_SRC=$(CURDIR) \
KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile $@
# Leave processing to above invocation of make
skip-makefile := 1
endif # ifneq ($(KBUILD_OUTPUT),)
endif # ifeq ($(KBUILD_SRC),)
# We process the rest of the Makefile if this is the final invocation of make
ifeq ($(skip-makefile),)
# If building an external module we do not care about the all: rule
# but instead _all depend on modules
.PHONY: all
ifeq ($(KBUILD_EXTMOD),)
_all: all
else
_all: modules
endif
srctree := $(if $(KBUILD_SRC),$(KBUILD_SRC),$(CURDIR))
TOPDIR := $(srctree)
# FIXME - TOPDIR is obsolete, use srctree/objtree
objtree := $(CURDIR)
src := $(srctree)
obj := $(objtree)
VPATH := $(srctree)
export srctree objtree VPATH TOPDIR
nullstring :=
space := $(nullstring) # end of line
# Take the contents of any files called localversion* and the config
# variable CONFIG_LOCALVERSION and append them to KERNELRELEASE. Be
# careful not to include files twice if building in the source
# directory. LOCALVERSION from the command line override all of this
localver := $(objtree)/localversion* $(srctree)/localversion*
localver := $(sort $(wildcard $(localver)))
# skip backup files (containing '~')
localver := $(foreach f, $(localver), $(if $(findstring ~, $(f)),,$(f)))
LOCALVERSION = $(subst $(space),, \
$(shell cat /dev/null $(localver)) \
$(patsubst "%",%,$(CONFIG_LOCALVERSION)))
KERNELRELEASE=$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)$(LOCALVERSION)
# SUBARCH tells the usermode build what the underlying arch is. That is set
# first, and if a usermode build is happening, the "ARCH=um" on the command
# line overrides the setting of ARCH below. If a native build is happening,
# then ARCH is assigned, getting whatever value it gets normally, and
# SUBARCH is subsequently ignored.
SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
-e s/arm.*/arm/ -e s/sa110/arm/ \
-e s/s390x/s390/ -e s/parisc64/parisc/ )
# Cross compiling and selecting different set of gcc/bin-utils
# ---------------------------------------------------------------------------
#
# When performing cross compilation for other architectures ARCH shall be set
# to the target architecture. (See arch/* for the possibilities).
# ARCH can be set during invocation of make:
# make ARCH=ia64
# Another way is to have ARCH set in the environment.
# The default ARCH is the host where make is executed.
# CROSS_COMPILE specify the prefix used for all executables used
# during compilation. Only gcc and related bin-utils executables
# are prefixed with $(CROSS_COMPILE).
# CROSS_COMPILE can be set on the command line
# make CROSS_COMPILE=ia64-linux-
# Alternatively CROSS_COMPILE can be set in the environment.
# Default value for CROSS_COMPILE is not to prefix executables
# Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile
ARCH ?= $(SUBARCH)
CROSS_COMPILE ?=
# Architecture as present in compile.h
UTS_MACHINE := $(ARCH)
# SHELL used by kbuild
CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
else if [ -x /bin/bash ]; then echo /bin/bash; \
else echo sh; fi ; fi)
HOSTCC = gcc
HOSTCXX = g++
HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer
HOSTCXXFLAGS = -O2
# Decide whether to build built-in, modular, or both.
# Normally, just do built-in.
KBUILD_MODULES :=
KBUILD_BUILTIN := 1
# If we have only "make modules", don't compile built-in objects.
# When we're building modules with modversions, we need to consider
# the built-in objects during the descend as well, in order to
# make sure the checksums are uptodate before we record them.
ifeq ($(MAKECMDGOALS),modules)
KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
endif
# If we have "make <whatever> modules", compile modules
# in addition to whatever we do anyway.
# Just "make" or "make all" shall build modules as well
ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
KBUILD_MODULES := 1
endif
ifeq ($(MAKECMDGOALS),)
KBUILD_MODULES := 1
endif
export KBUILD_MODULES KBUILD_BUILTIN
export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
# Beautify output
# ---------------------------------------------------------------------------
#
# Normally, we echo the whole command before executing it. By making
# that echo $($(quiet)$(cmd)), we now have the possibility to set
# $(quiet) to choose other forms of output instead, e.g.
#
# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
#
# If $(quiet) is empty, the whole command will be printed.
# If it is set to "quiet_", only the short version will be printed.
# If it is set to "silent_", nothing wil be printed at all, since
# the variable $(silent_cmd_cc_o_c) doesn't exist.
#
# A simple variant is to prefix commands with $(Q) - that's usefull
# for commands that shall be hidden in non-verbose mode.
#
# $(Q)ln $@ :<
#
# If KBUILD_VERBOSE equals 0 then the above command will be hidden.
# If KBUILD_VERBOSE equals 1 then the above command is displayed.
ifeq ($(KBUILD_VERBOSE),1)
quiet =
Q =
else
quiet=quiet_
Q = @
endif
# If the user is running make -s (silent mode), suppress echoing of
# commands
ifneq ($(findstring s,$(MAKEFLAGS)),)
quiet=silent_
endif
export quiet Q KBUILD_VERBOSE
######
# cc support functions to be used (only) in arch/$(ARCH)/Makefile
# See documentation in Documentation/kbuild/makefiles.txt
# cc-option
# Usage: cflags-y += $(call cc-option, -march=winchip-c6, -march=i586)
cc-option = $(shell if $(CC) $(CFLAGS) $(1) -S -o /dev/null -xc /dev/null \
> /dev/null 2>&1; then echo "$(1)"; else echo "$(2)"; fi ;)
# For backward compatibility
check_gcc = $(warning check_gcc is deprecated - use cc-option) \
$(call cc-option, $(1),$(2))
# cc-option-yn
# Usage: flag := $(call cc-option-yn, -march=winchip-c6)
cc-option-yn = $(shell if $(CC) $(CFLAGS) $(1) -S -o /dev/null -xc /dev/null \
> /dev/null 2>&1; then echo "y"; else echo "n"; fi;)
# cc-option-align
# Prefix align with either -falign or -malign
cc-option-align = $(subst -functions=0,,\
$(call cc-option,-falign-functions=0,-malign-functions=0))
# cc-version
# Usage gcc-ver := $(call cc-version $(CC))
cc-version = $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-version.sh \
$(if $(1), $(1), $(CC)))
# Look for make include files relative to root of kernel src
MAKEFLAGS += --include-dir=$(srctree)
# We need some generic definitions
include $(srctree)/scripts/Kbuild.include
# For maximum performance (+ possibly random breakage, uncomment
# the following)
#MAKEFLAGS += -rR
# Make variables (CC, etc...)
AS = $(CROSS_COMPILE)as
LD = $(CROSS_COMPILE)ld
CC = $(CROSS_COMPILE)gcc
CPP = $(CC) -E
AR = $(CROSS_COMPILE)ar
NM = $(CROSS_COMPILE)nm
STRIP = $(CROSS_COMPILE)strip
OBJCOPY = $(CROSS_COMPILE)objcopy
OBJDUMP = $(CROSS_COMPILE)objdump
AWK = awk
GENKSYMS = scripts/genksyms/genksyms
DEPMOD = /sbin/depmod
KALLSYMS = scripts/kallsyms
PERL = perl
CHECK = sparse
CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ $(CF)
MODFLAGS = -DMODULE
CFLAGS_MODULE = $(MODFLAGS)
AFLAGS_MODULE = $(MODFLAGS)
LDFLAGS_MODULE = -r
CFLAGS_KERNEL =
AFLAGS_KERNEL =
# Use LINUXINCLUDE when you must reference the include/ directory.
# Needed to be compatible with the O= option
LINUXINCLUDE := -Iinclude \
$(if $(KBUILD_SRC),-Iinclude2 -I$(srctree)/include)
CPPFLAGS := -D__KERNEL__ $(LINUXINCLUDE)
CFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
-fno-strict-aliasing -fno-common \
-ffreestanding
AFLAGS := -D__ASSEMBLY__
export VERSION PATCHLEVEL SUBLEVEL EXTRAVERSION LOCALVERSION KERNELRELEASE \
ARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC \
CPP AR NM STRIP OBJCOPY OBJDUMP MAKE AWK GENKSYMS PERL UTS_MACHINE \
HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
export CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS
export CFLAGS CFLAGS_KERNEL CFLAGS_MODULE
export AFLAGS AFLAGS_KERNEL AFLAGS_MODULE
# When compiling out-of-tree modules, put MODVERDIR in the module
# tree rather than in the kernel tree. The kernel tree might
# even be read-only.
export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
# Files to ignore in find ... statements
RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS -o -name .pc -o -name .hg \) -prune -o
RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn --exclude CVS --exclude .pc --exclude .hg
# ===========================================================================
# Rules shared between *config targets and build targets
# Basic helpers built in scripts/
.PHONY: scripts_basic
scripts_basic:
$(Q)$(MAKE) $(build)=scripts/basic
# To avoid any implicit rule to kick in, define an empty command.
scripts/basic/%: scripts_basic ;
.PHONY: outputmakefile
# outputmakefile generate a Makefile to be placed in output directory, if
# using a seperate output directory. This allows convinient use
# of make in output directory
outputmakefile:
$(Q)if test ! $(srctree) -ef $(objtree); then \
$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
$(srctree) $(objtree) $(VERSION) $(PATCHLEVEL) \
> $(objtree)/Makefile; \
echo ' GEN $(objtree)/Makefile'; \
fi
# To make sure we do not include .config for any of the *config targets
# catch them early, and hand them over to scripts/kconfig/Makefile
# It is allowed to specify more targets when calling make, including
# mixing *config targets and build targets.
# For example 'make oldconfig all'.
# Detect when mixed targets is specified, and make a second invocation
# of make so .config is not included in this case either (for *config).
no-dot-config-targets := clean mrproper distclean \
cscope TAGS tags help %docs check%
config-targets := 0
mixed-targets := 0
dot-config := 1
ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
dot-config := 0
endif
endif
ifeq ($(KBUILD_EXTMOD),)
ifneq ($(filter config %config,$(MAKECMDGOALS)),)
config-targets := 1
ifneq ($(filter-out config %config,$(MAKECMDGOALS)),)
mixed-targets := 1
endif
endif
endif
ifeq ($(mixed-targets),1)
# ===========================================================================
# We're called with mixed targets (*config and build targets).
# Handle them one by one.
%:: FORCE
$(Q)$(MAKE) -C $(srctree) KBUILD_SRC= $@
else
ifeq ($(config-targets),1)
# ===========================================================================
# *config targets only - make sure prerequisites are updated, and descend
# in scripts/kconfig to make the *config target
# Read arch specific Makefile to set KBUILD_DEFCONFIG as needed.
# KBUILD_DEFCONFIG may point out an alternative default configuration
# used for 'make defconfig'
include $(srctree)/arch/$(ARCH)/Makefile
export KBUILD_DEFCONFIG
config %config: scripts_basic outputmakefile FORCE
$(Q)mkdir -p include/linux
$(Q)$(MAKE) $(build)=scripts/kconfig $@
else
# ===========================================================================
# Build targets only - this includes vmlinux, arch specific targets, clean
# targets and others. In general all targets except *config targets.
ifeq ($(KBUILD_EXTMOD),)
# Additional helpers built in scripts/
# Carefully list dependencies so we do not try to build scripts twice
# in parrallel
.PHONY: scripts
scripts: scripts_basic include/config/MARKER
$(Q)$(MAKE) $(build)=$(@)
scripts_basic: include/linux/autoconf.h
# Objects we will link into vmlinux / subdirs we need to visit
init-y := init/
drivers-y := drivers/ sound/
net-y := net/
libs-y := lib/
core-y := usr/
endif # KBUILD_EXTMOD
ifeq ($(dot-config),1)
# In this section, we need .config
# Read in dependencies to all Kconfig* files, make sure to run
# oldconfig if changes are detected.
-include .config.cmd
include .config
# If .config needs to be updated, it will be done via the dependency
# that autoconf has on .config.
# To avoid any implicit rule to kick in, define an empty command
.config: ;
# If .config is newer than include/linux/autoconf.h, someone tinkered
# with it and forgot to run make oldconfig
include/linux/autoconf.h: .config
$(Q)mkdir -p include/linux
$(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig
else
# Dummy target needed, because used as prerequisite
include/linux/autoconf.h: ;
endif
# The all: target is the default when no target is given on the
# command line.
# This allow a user to issue only 'make' to build a kernel including modules
# Defaults vmlinux but it is usually overriden in the arch makefile
all: vmlinux
ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
CFLAGS += -Os
else
CFLAGS += -O2
endif
#Add align options if CONFIG_CC_* is not equal to 0
add-align = $(if $(filter-out 0,$($(1))),$(cc-option-align)$(2)=$($(1)))
CFLAGS += $(call add-align,CONFIG_CC_ALIGN_FUNCTIONS,-functions)
CFLAGS += $(call add-align,CONFIG_CC_ALIGN_LABELS,-labels)
CFLAGS += $(call add-align,CONFIG_CC_ALIGN_LOOPS,-loops)
CFLAGS += $(call add-align,CONFIG_CC_ALIGN_JUMPS,-jumps)
ifdef CONFIG_FRAME_POINTER
CFLAGS += -fno-omit-frame-pointer $(call cc-option,-fno-optimize-sibling-calls,)
else
CFLAGS += -fomit-frame-pointer
endif
ifdef CONFIG_DEBUG_INFO
CFLAGS += -g
endif
include $(srctree)/arch/$(ARCH)/Makefile
# arch Makefile may override CC so keep this after arch Makefile is included
NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
CHECKFLAGS += $(NOSTDINC_FLAGS)
# warn about C99 declaration after statement
CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
# disable pointer signedness warnings in gcc 4.0
CFLAGS += $(call cc-option,-Wno-pointer-sign,)
# Default kernel image to build when no specific target is given.
# KBUILD_IMAGE may be overruled on the commandline or
# set in the environment
# Also any assignments in arch/$(ARCH)/Makefile take precedence over
# this default value
export KBUILD_IMAGE ?= vmlinux
#
# INSTALL_PATH specifies where to place the updated kernel and system map
# images. Default is /boot, but you can set it to other values
export INSTALL_PATH ?= /boot
# If CONFIG_LOCALVERSION_AUTO is set, we automatically perform some tests
# and try to determine if the current source tree is a release tree, of any sort,
# or if is a pure development tree.
#
# A 'release tree' is any tree with a git TAG associated
# with it. The primary goal of this is to make it safe for a native
# git/CVS/SVN user to build a release tree (i.e, 2.6.9) and also to
# continue developing against the current Linus tree, without having the Linus
# tree overwrite the 2.6.9 tree when installed.
#
# Currently, only git is supported.
# Other SCMs can edit scripts/setlocalversion and add the appropriate
# checks as needed.
ifdef CONFIG_LOCALVERSION_AUTO
localversion-auto := $(shell $(PERL) $(srctree)/scripts/setlocalversion $(srctree))
LOCALVERSION := $(LOCALVERSION)$(localversion-auto)
endif
#
# INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory
# relocations required by build roots. This is not defined in the
# makefile but the arguement can be passed to make if needed.
#
MODLIB := $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE)
export MODLIB
ifeq ($(KBUILD_EXTMOD),)
core-y += kernel/ mm/ fs/ ipc/ security/ crypto/
vmlinux-dirs := $(patsubst %/,%,$(filter %/, $(init-y) $(init-m) \
$(core-y) $(core-m) $(drivers-y) $(drivers-m) \
$(net-y) $(net-m) $(libs-y) $(libs-m)))
vmlinux-alldirs := $(sort $(vmlinux-dirs) $(patsubst %/,%,$(filter %/, \
$(init-n) $(init-) \
$(core-n) $(core-) $(drivers-n) $(drivers-) \
$(net-n) $(net-) $(libs-n) $(libs-))))
init-y := $(patsubst %/, %/built-in.o, $(init-y))
core-y := $(patsubst %/, %/built-in.o, $(core-y))
drivers-y := $(patsubst %/, %/built-in.o, $(drivers-y))
net-y := $(patsubst %/, %/built-in.o, $(net-y))
libs-y1 := $(patsubst %/, %/lib.a, $(libs-y))
libs-y2 := $(patsubst %/, %/built-in.o, $(libs-y))
libs-y := $(libs-y1) $(libs-y2)
# Build vmlinux
# ---------------------------------------------------------------------------
# vmlinux is build from the objects selected by $(vmlinux-init) and
# $(vmlinux-main). Most are built-in.o files from top-level directories
# in the kernel tree, others are specified in arch/$(ARCH)Makefile.
# Ordering when linking is important, and $(vmlinux-init) must be first.
#
# vmlinux
# ^
# |
# +-< $(vmlinux-init)
# | +--< init/version.o + more
# |
# +--< $(vmlinux-main)
# | +--< driver/built-in.o mm/built-in.o + more
# |
# +-< kallsyms.o (see description in CONFIG_KALLSYMS section)
#
# vmlinux version (uname -v) cannot be updated during normal
# descending-into-subdirs phase since we do not yet know if we need to
# update vmlinux.
# Therefore this step is delayed until just before final link of vmlinux -
# except in the kallsyms case where it is done just before adding the
# symbols to the kernel.
#
# System.map is generated to document addresses of all kernel symbols
vmlinux-init := $(head-y) $(init-y)
vmlinux-main := $(core-y) $(libs-y) $(drivers-y) $(net-y)
vmlinux-all := $(vmlinux-init) $(vmlinux-main)
vmlinux-lds := arch/$(ARCH)/kernel/vmlinux.lds
# Rule to link vmlinux - also used during CONFIG_KALLSYMS
# May be overridden by arch/$(ARCH)/Makefile
quiet_cmd_vmlinux__ ?= LD $@
cmd_vmlinux__ ?= $(LD) $(LDFLAGS) $(LDFLAGS_vmlinux) -o $@ \
-T $(vmlinux-lds) $(vmlinux-init) \
--start-group $(vmlinux-main) --end-group \
$(filter-out $(vmlinux-lds) $(vmlinux-init) $(vmlinux-main) FORCE ,$^)
# Generate new vmlinux version
quiet_cmd_vmlinux_version = GEN .version
cmd_vmlinux_version = set -e; \
if [ ! -r .version ]; then \
rm -f .version; \
echo 1 >.version; \
else \
mv .version .old_version; \
expr 0$$(cat .old_version) + 1 >.version; \
fi; \
$(MAKE) $(build)=init
# Generate System.map
quiet_cmd_sysmap = SYSMAP
cmd_sysmap = $(CONFIG_SHELL) $(srctree)/scripts/mksysmap
# Link of vmlinux
# If CONFIG_KALLSYMS is set .version is already updated
# Generate System.map and verify that the content is consistent
define rule_vmlinux__
$(if $(CONFIG_KALLSYMS),,+$(call cmd,vmlinux_version))
$(call cmd,vmlinux__)
$(Q)echo 'cmd_$@ := $(cmd_vmlinux__)' > $(@D)/.$(@F).cmd
$(Q)$(if $($(quiet)cmd_sysmap), \
echo ' $($(quiet)cmd_sysmap) System.map' &&) \
$(cmd_sysmap) $@ System.map; \
if [ $$? -ne 0 ]; then \
rm -f $@; \
/bin/false; \
fi;
$(verify_kallsyms)
endef
ifdef CONFIG_KALLSYMS
# Generate section listing all symbols and add it into vmlinux $(kallsyms.o)
# It's a three stage process:
# o .tmp_vmlinux1 has all symbols and sections, but __kallsyms is
# empty
# Running kallsyms on that gives us .tmp_kallsyms1.o with
# the right size - vmlinux version (uname -v) is updated during this step
# o .tmp_vmlinux2 now has a __kallsyms section of the right size,
# but due to the added section, some addresses have shifted.
# From here, we generate a correct .tmp_kallsyms2.o
# o The correct .tmp_kallsyms2.o is linked into the final vmlinux.
# o Verify that the System.map from vmlinux matches the map from
# .tmp_vmlinux2, just in case we did not generate kallsyms correctly.
# o If CONFIG_KALLSYMS_EXTRA_PASS is set, do an extra pass using
# .tmp_vmlinux3 and .tmp_kallsyms3.o. This is only meant as a
# temporary bypass to allow the kernel to be built while the
# maintainers work out what went wrong with kallsyms.
ifdef CONFIG_KALLSYMS_EXTRA_PASS
last_kallsyms := 3
else
last_kallsyms := 2
endif
kallsyms.o := .tmp_kallsyms$(last_kallsyms).o
define verify_kallsyms
$(Q)$(if $($(quiet)cmd_sysmap), \
echo ' $($(quiet)cmd_sysmap) .tmp_System.map' &&) \
$(cmd_sysmap) .tmp_vmlinux$(last_kallsyms) .tmp_System.map
$(Q)cmp -s System.map .tmp_System.map || \
(echo Inconsistent kallsyms data; \
echo Try setting CONFIG_KALLSYMS_EXTRA_PASS; \
rm .tmp_kallsyms* ; /bin/false )
endef
# Update vmlinux version before link
# Use + in front of this rule to silent warning about make -j1
# First command is ':' to allow us to use + in front of this rule
cmd_ksym_ld = $(cmd_vmlinux__)
define rule_ksym_ld
:
+$(call cmd,vmlinux_version)
$(call cmd,vmlinux__)
$(Q)echo 'cmd_$@ := $(cmd_vmlinux__)' > $(@D)/.$(@F).cmd
endef
# Generate .S file with all kernel symbols
quiet_cmd_kallsyms = KSYM $@
cmd_kallsyms = $(NM) -n $< | $(KALLSYMS) \
$(if $(CONFIG_KALLSYMS_ALL),--all-symbols) > $@
.tmp_kallsyms1.o .tmp_kallsyms2.o .tmp_kallsyms3.o: %.o: %.S scripts FORCE
$(call if_changed_dep,as_o_S)
.tmp_kallsyms%.S: .tmp_vmlinux% $(KALLSYMS)
$(call cmd,kallsyms)
# .tmp_vmlinux1 must be complete except kallsyms, so update vmlinux version
.tmp_vmlinux1: $(vmlinux-lds) $(vmlinux-all) FORCE
$(call if_changed_rule,ksym_ld)
.tmp_vmlinux2: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms1.o FORCE
$(call if_changed,vmlinux__)
.tmp_vmlinux3: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms2.o FORCE
$(call if_changed,vmlinux__)
# Needs to visit scripts/ before $(KALLSYMS) can be used.
$(KALLSYMS): scripts ;
# Generate some data for debugging strange kallsyms problems
debug_kallsyms: .tmp_map$(last_kallsyms)
.tmp_map%: .tmp_vmlinux% FORCE
($(OBJDUMP) -h $< | $(AWK) '/^ +[0-9]/{print $$4 " 0 " $$2}'; $(NM) $<) | sort > $@
.tmp_map3: .tmp_map2
.tmp_map2: .tmp_map1
endif # ifdef CONFIG_KALLSYMS
# vmlinux image - including updated kernel symbols
vmlinux: $(vmlinux-lds) $(vmlinux-init) $(vmlinux-main) $(kallsyms.o) FORCE
$(call if_changed_rule,vmlinux__)
$(Q)rm -f .old_version
# The actual objects are generated when descending,
# make sure no implicit rule kicks in
$(sort $(vmlinux-init) $(vmlinux-main)) $(vmlinux-lds): $(vmlinux-dirs) ;
# Handle descending into subdirectories listed in $(vmlinux-dirs)
# Preset locale variables to speed up the build process. Limit locale
# tweaks to this spot to avoid wrong language settings when running
# make menuconfig etc.
# Error messages still appears in the original language
.PHONY: $(vmlinux-dirs)
$(vmlinux-dirs): prepare scripts
$(Q)$(MAKE) $(build)=$@
# Things we need to do before we recursively start building the kernel
# or the modules are listed in "prepare".
# A multi level approach is used. prepareN is processed before prepareN-1.
# archprepare is used in arch Makefiles and when processed asm symlink,
# version.h and scripts_basic is processed / created.
# Listed in dependency order
.PHONY: prepare archprepare prepare0 prepare1 prepare2 prepare3
# prepare-all is deprecated, use prepare as valid replacement
.PHONY: prepare-all
# prepare3 is used to check if we are building in a separate output directory,
# and if so do:
# 1) Check that make has not been executed in the kernel src $(srctree)
# 2) Create the include2 directory, used for the second asm symlink
prepare3:
ifneq ($(KBUILD_SRC),)
@echo ' Using $(srctree) as source for kernel'
$(Q)if [ -f $(srctree)/.config ]; then \
echo " $(srctree) is not clean, please run 'make mrproper'";\
echo " in the '$(srctree)' directory.";\
/bin/false; \
fi;
$(Q)if [ ! -d include2 ]; then mkdir -p include2; fi;
$(Q)ln -fsn $(srctree)/include/asm-$(ARCH) include2/asm
endif
# prepare2 creates a makefile if using a separate output directory
prepare2: prepare3 outputmakefile
prepare1: prepare2 include/linux/version.h include/asm \
include/config/MARKER
ifneq ($(KBUILD_MODULES),)
$(Q)rm -rf $(MODVERDIR)
$(Q)mkdir -p $(MODVERDIR)
endif
archprepare: prepare1 scripts_basic
prepare0: archprepare FORCE
$(Q)$(MAKE) $(build)=.
# All the preparing..
prepare prepare-all: prepare0
# Leave this as default for preprocessing vmlinux.lds.S, which is now
# done in arch/$(ARCH)/kernel/Makefile
export CPPFLAGS_vmlinux.lds += -P -C -U$(ARCH)
# Single targets
# ---------------------------------------------------------------------------
%.s: %.c scripts FORCE
$(Q)$(MAKE) $(build)=$(@D) $@
%.i: %.c scripts FORCE
$(Q)$(MAKE) $(build)=$(@D) $@
%.o: %.c scripts FORCE
$(Q)$(MAKE) $(build)=$(@D) $@
%.ko: scripts FORCE
$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) $(build)=$(@D) $(@:.ko=.o)
$(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modpost
%/: scripts prepare FORCE
$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) $(build)=$(@D)
%.lst: %.c scripts FORCE
$(Q)$(MAKE) $(build)=$(@D) $@
%.s: %.S scripts FORCE
$(Q)$(MAKE) $(build)=$(@D) $@
%.o: %.S scripts FORCE
$(Q)$(MAKE) $(build)=$(@D) $@
# FIXME: The asm symlink changes when $(ARCH) changes. That's
# hard to detect, but I suppose "make mrproper" is a good idea
# before switching between archs anyway.
include/asm:
@echo ' SYMLINK $@ -> include/asm-$(ARCH)'
$(Q)if [ ! -d include ]; then mkdir -p include; fi;
@ln -fsn asm-$(ARCH) $@
# Split autoconf.h into include/linux/config/*
include/config/MARKER: scripts/basic/split-include include/linux/autoconf.h
@echo ' SPLIT include/linux/autoconf.h -> include/config/*'
@scripts/basic/split-include include/linux/autoconf.h include/config
@touch $@
# Generate some files
# ---------------------------------------------------------------------------
# KERNELRELEASE can change from a few different places, meaning version.h
# needs to be updated, so this check is forced on all builds
uts_len := 64
define filechk_version.h
if [ `echo -n "$(KERNELRELEASE)" | wc -c ` -gt $(uts_len) ]; then \
echo '"$(KERNELRELEASE)" exceeds $(uts_len) characters' >&2; \
exit 1; \
fi; \
(echo \#define UTS_RELEASE \"$(KERNELRELEASE)\"; \
echo \#define LINUX_VERSION_CODE `expr $(VERSION) \\* 65536 + $(PATCHLEVEL) \\* 256 + $(SUBLEVEL)`; \
echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))'; \
)
endef
include/linux/version.h: $(srctree)/Makefile FORCE
$(call filechk,version.h)
# ---------------------------------------------------------------------------
.PHONY: depend dep
depend dep:
@echo '*** Warning: make $@ is unnecessary now.'
# ---------------------------------------------------------------------------
# Modules
ifdef CONFIG_MODULES
# By default, build modules as well
all: modules
# Build modules
.PHONY: modules
modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux)
@echo ' Building modules, stage 2.';
$(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modpost
# Target to prepare building external modules
.PHONY: modules_prepare
modules_prepare: prepare scripts
# Target to install modules
.PHONY: modules_install
modules_install: _modinst_ _modinst_post
.PHONY: _modinst_
_modinst_:
@if [ -z "`$(DEPMOD) -V 2>/dev/null | grep module-init-tools`" ]; then \
echo "Warning: you may need to install module-init-tools"; \
echo "See http://www.codemonkey.org.uk/docs/post-halloween-2.6.txt";\
sleep 1; \
fi
@rm -rf $(MODLIB)/kernel
@rm -f $(MODLIB)/source
@mkdir -p $(MODLIB)/kernel
@ln -s $(srctree) $(MODLIB)/source
@if [ ! $(objtree) -ef $(MODLIB)/build ]; then \
rm -f $(MODLIB)/build ; \
ln -s $(objtree) $(MODLIB)/build ; \
fi
$(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modinst
# If System.map exists, run depmod. This deliberately does not have a
# dependency on System.map since that would run the dependency tree on
# vmlinux. This depmod is only for convenience to give the initial
# boot a modules.dep even before / is mounted read-write. However the
# boot script depmod is the master version.
ifeq "$(strip $(INSTALL_MOD_PATH))" ""
depmod_opts :=
else
depmod_opts := -b $(INSTALL_MOD_PATH) -r
endif
.PHONY: _modinst_post
_modinst_post: _modinst_
if [ -r System.map -a -x $(DEPMOD) ]; then $(DEPMOD) -ae -F System.map $(depmod_opts) $(KERNELRELEASE); fi
else # CONFIG_MODULES
# Modules not configured
# ---------------------------------------------------------------------------
modules modules_install: FORCE
@echo
@echo "The present kernel configuration has modules disabled."
@echo "Type 'make config' and enable loadable module support."
@echo "Then build a kernel with module support enabled."
@echo
@exit 1
endif # CONFIG_MODULES
###
# Cleaning is done on three levels.
# make clean Delete most generated files
# Leave enough to build external modules
# make mrproper Delete the current configuration, and all generated files
# make distclean Remove editor backup files, patch leftover files and the like
# Directories & files removed with 'make clean'
CLEAN_DIRS += $(MODVERDIR)
CLEAN_FILES += vmlinux System.map \
.tmp_kallsyms* .tmp_version .tmp_vmlinux* .tmp_System.map
# Directories & files removed with 'make mrproper'
MRPROPER_DIRS += include/config include2
MRPROPER_FILES += .config .config.old include/asm .version \
include/linux/autoconf.h include/linux/version.h \
Module.symvers tags TAGS cscope*
# clean - Delete most, but leave enough to build external modules
#
clean: rm-dirs := $(CLEAN_DIRS)
clean: rm-files := $(CLEAN_FILES)
clean-dirs := $(addprefix _clean_,$(srctree) $(vmlinux-alldirs))
.PHONY: $(clean-dirs) clean archclean
$(clean-dirs):
$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
clean: archclean $(clean-dirs)
$(call cmd,rmdirs)
$(call cmd,rmfiles)
@find . $(RCS_FIND_IGNORE) \
\( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
-o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \) \
-type f -print | xargs rm -f
# mrproper - Delete all generated files, including .config
#
mrproper: rm-dirs := $(wildcard $(MRPROPER_DIRS))
mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
mrproper-dirs := $(addprefix _mrproper_,Documentation/DocBook scripts)
.PHONY: $(mrproper-dirs) mrproper archmrproper
$(mrproper-dirs):
$(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
mrproper: clean archmrproper $(mrproper-dirs)
$(call cmd,rmdirs)
$(call cmd,rmfiles)
# distclean
#
.PHONY: distclean
distclean: mrproper
@find $(srctree) $(RCS_FIND_IGNORE) \
\( -name '*.orig' -o -name '*.rej' -o -name '*~' \
-o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
-o -name '.*.rej' -o -size 0 \
-o -name '*%' -o -name '.*.cmd' -o -name 'core' \) \
-type f -print | xargs rm -f
# Packaging of the kernel to various formats
# ---------------------------------------------------------------------------
# rpm target kept for backward compatibility
package-dir := $(srctree)/scripts/package
.PHONY: %-pkg rpm
%pkg: FORCE
$(Q)$(MAKE) -f $(package-dir)/Makefile $@
rpm: FORCE
$(Q)$(MAKE) -f $(package-dir)/Makefile $@
# Brief documentation of the typical targets used
# ---------------------------------------------------------------------------
boards := $(wildcard $(srctree)/arch/$(ARCH)/configs/*_defconfig)
boards := $(notdir $(boards))
help:
@echo 'Cleaning targets:'
@echo ' clean - remove most generated files but keep the config'
@echo ' mrproper - remove all generated files + config + various backup files'
@echo ''
@echo 'Configuration targets:'
@$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
@echo ''
@echo 'Other generic targets:'
@echo ' all - Build all targets marked with [*]'
@echo '* vmlinux - Build the bare kernel'
@echo '* modules - Build all modules'
@echo ' modules_install - Install all modules'
@echo ' dir/ - Build all files in dir and below'
@echo ' dir/file.[ois] - Build specified target only'
@echo ' dir/file.ko - Build module including final link'
@echo ' rpm - Build a kernel as an RPM package'
@echo ' tags/TAGS - Generate tags file for editors'
@echo ' cscope - Generate cscope index'
@echo ' kernelrelease - Output the release version string'
@echo ''
@echo 'Static analysers'
@echo ' buildcheck - List dangling references to vmlinux discarded sections'
@echo ' and init sections from non-init sections'
@echo ' checkstack - Generate a list of stack hogs'
@echo ' namespacecheck - Name space analysis on compiled kernel'
@echo ''
@echo 'Kernel packaging:'
@$(MAKE) -f $(package-dir)/Makefile help
@echo ''
@echo 'Documentation targets:'
@$(MAKE) -f $(srctree)/Documentation/DocBook/Makefile dochelp
@echo ''
@echo 'Architecture specific targets ($(ARCH)):'
@$(if $(archhelp),$(archhelp),\
echo ' No architecture specific help defined for $(ARCH)')
@echo ''
@$(if $(boards), \
$(foreach b, $(boards), \
printf " %-24s - Build for %s\\n" $(b) $(subst _defconfig,,$(b));) \
echo '')
@echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
@echo ' make O=dir [targets] Locate all output files in "dir", including .config'
@echo ' make C=1 [targets] Check all c source with $$CHECK (sparse)'
@echo ' make C=2 [targets] Force check of all c source with $$CHECK (sparse)'
@echo ''
@echo 'Execute "make" or "make all" to build all targets marked with [*] '
@echo 'For further info see the ./README file'
# Documentation targets
# ---------------------------------------------------------------------------
%docs: scripts_basic FORCE
$(Q)$(MAKE) $(build)=Documentation/DocBook $@
else # KBUILD_EXTMOD
###
# External module support.
# When building external modules the kernel used as basis is considered
# read-only, and no consistency checks are made and the make
# system is not used on the basis kernel. If updates are required
# in the basis kernel ordinary make commands (without M=...) must
# be used.
#
# The following are the only valid targets when building external
# modules.
# make M=dir clean Delete all automatically generated files
# make M=dir modules Make all modules in specified dir
# make M=dir Same as 'make M=dir modules'
# make M=dir modules_install
# Install the modules build in the module directory
# Assumes install directory is already created
# We are always building modules
KBUILD_MODULES := 1
.PHONY: crmodverdir
crmodverdir:
$(Q)mkdir -p $(MODVERDIR)
.PHONY: $(objtree)/Module.symvers
$(objtree)/Module.symvers:
@test -e $(objtree)/Module.symvers || ( \
echo; \
echo " WARNING: Symbol version dump $(objtree)/Module.symvers"; \
echo " is missing; modules will have no dependencies and modversions."; \
echo )
module-dirs := $(addprefix _module_,$(KBUILD_EXTMOD))
.PHONY: $(module-dirs) modules
$(module-dirs): crmodverdir $(objtree)/Module.symvers
$(Q)$(MAKE) $(build)=$(patsubst _module_%,%,$@)
modules: $(module-dirs)
@echo ' Building modules, stage 2.';
$(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modpost
.PHONY: modules_install
modules_install:
$(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modinst
clean-dirs := $(addprefix _clean_,$(KBUILD_EXTMOD))
.PHONY: $(clean-dirs) clean
$(clean-dirs):
$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
clean: rm-dirs := $(MODVERDIR)
clean: $(clean-dirs)
$(call cmd,rmdirs)
@find $(KBUILD_EXTMOD) $(RCS_FIND_IGNORE) \
\( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
-o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \) \
-type f -print | xargs rm -f
help:
@echo ' Building external modules.'
@echo ' Syntax: make -C path/to/kernel/src M=$$PWD target'
@echo ''
@echo ' modules - default target, build the module(s)'
@echo ' modules_install - install the module'
@echo ' clean - remove generated files in module directory only'
@echo ''
endif # KBUILD_EXTMOD
# Generate tags for editors
# ---------------------------------------------------------------------------
#We want __srctree to totally vanish out when KBUILD_OUTPUT is not set
#(which is the most common case IMHO) to avoid unneeded clutter in the big tags file.
#Adding $(srctree) adds about 20M on i386 to the size of the output file!
ifeq ($(src),$(obj))
__srctree =
else
__srctree = $(srctree)/
endif
ALLSOURCE_ARCHS := $(ARCH)
define all-sources
( find $(__srctree) $(RCS_FIND_IGNORE) \
\( -name include -o -name arch \) -prune -o \
-name '*.[chS]' -print; \
for ARCH in $(ALLSOURCE_ARCHS) ; do \
find $(__srctree)arch/$${ARCH} $(RCS_FIND_IGNORE) \
-name '*.[chS]' -print; \
done ; \
find $(__srctree)security/selinux/include $(RCS_FIND_IGNORE) \
-name '*.[chS]' -print; \
find $(__srctree)include $(RCS_FIND_IGNORE) \
\( -name config -o -name 'asm-*' \) -prune \
-o -name '*.[chS]' -print; \
for ARCH in $(ALLSOURCE_ARCHS) ; do \
find $(__srctree)include/asm-$${ARCH} $(RCS_FIND_IGNORE) \
-name '*.[chS]' -print; \
done ; \
find $(__srctree)include/asm-generic $(RCS_FIND_IGNORE) \
-name '*.[chS]' -print )
endef
quiet_cmd_cscope-file = FILELST cscope.files
cmd_cscope-file = (echo \-k; echo \-q; $(all-sources)) > cscope.files
quiet_cmd_cscope = MAKE cscope.out
cmd_cscope = cscope -b
cscope: FORCE
$(call cmd,cscope-file)
$(call cmd,cscope)
quiet_cmd_TAGS = MAKE $@
define cmd_TAGS
rm -f $@; \
ETAGSF=`etags --version | grep -i exuberant >/dev/null && echo "-I __initdata,__exitdata,EXPORT_SYMBOL,EXPORT_SYMBOL_GPL --extra=+f"`; \
$(all-sources) | xargs etags $$ETAGSF -a
endef
TAGS: FORCE
$(call cmd,TAGS)
quiet_cmd_tags = MAKE $@
define cmd_tags
rm -f $@; \
CTAGSF=`ctags --version | grep -i exuberant >/dev/null && echo "-I __initdata,__exitdata,EXPORT_SYMBOL,EXPORT_SYMBOL_GPL --extra=+f"`; \
$(all-sources) | xargs ctags $$CTAGSF -a
endef
tags: FORCE
$(call cmd,tags)
# Scripts to check various things for consistency
# ---------------------------------------------------------------------------
configcheck:
find * $(RCS_FIND_IGNORE) \
-name '*.[hcS]' -type f -print | sort \
| xargs $(PERL) -w scripts/checkconfig.pl
includecheck:
find * $(RCS_FIND_IGNORE) \
-name '*.[hcS]' -type f -print | sort \
| xargs $(PERL) -w scripts/checkincludes.pl
versioncheck:
find * $(RCS_FIND_IGNORE) \
-name '*.[hcS]' -type f -print | sort \
| xargs $(PERL) -w scripts/checkversion.pl
buildcheck:
$(PERL) $(srctree)/scripts/reference_discarded.pl
$(PERL) $(srctree)/scripts/reference_init.pl
namespacecheck:
$(PERL) $(srctree)/scripts/namespace.pl
endif #ifeq ($(config-targets),1)
endif #ifeq ($(mixed-targets),1)
.PHONY: checkstack
checkstack:
$(OBJDUMP) -d vmlinux $$(find . -name '*.ko') | \
$(PERL) $(src)/scripts/checkstack.pl $(ARCH)
kernelrelease:
@echo $(KERNELRELEASE)
# FIXME Should go into a make.lib or something
# ===========================================================================
quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs)))
cmd_rmdirs = rm -rf $(rm-dirs)
quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files)))
cmd_rmfiles = rm -f $(rm-files)
a_flags = -Wp,-MD,$(depfile) $(AFLAGS) $(AFLAGS_KERNEL) \
$(NOSTDINC_FLAGS) $(CPPFLAGS) \
$(modkern_aflags) $(EXTRA_AFLAGS) $(AFLAGS_$(*F).o)
quiet_cmd_as_o_S = AS $@
cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $<
# read all saved command lines
targets := $(wildcard $(sort $(targets)))
cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
ifneq ($(cmd_files),)
$(cmd_files): ; # Do not try to update included dependency files
include $(cmd_files)
endif
# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir
# Usage:
# $(Q)$(MAKE) $(clean)=dir
clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj
endif # skip-makefile
FORCE:
Jump to Line
Something went wrong with that request. Please try again.