Merge remote-tracking branch 'linus/master' into x86/urgent

CREDITS

@@ -514,6 +514,11 @@ S: Bessemerstraat 21
 S: Amsterdam
 S: The Netherlands
 
+N: NeilBrown
+E: neil@brown.name
+P: 4096R/566281B9 1BC6 29EB D390 D870 7B5F  497A 39EC 9EDD 5662 81B9
+D: NFSD Maintainer 2000-2007
+
 N: Zach Brown
 E: zab@zabbo.net
 D: maestro pci sound

Documentation/ABI/stable/sysfs-bus-xen-backend

@@ -0,0 +1,75 @@
+What:		/sys/bus/xen-backend/devices/*/devtype
+Date:		Feb 2009
+KernelVersion:	2.6.38
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+                The type of the device.  e.g., one of: 'vbd' (block),
+                'vif' (network), or 'vfb' (framebuffer).
+
+What:		/sys/bus/xen-backend/devices/*/nodename
+Date:		Feb 2009
+KernelVersion:	2.6.38
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+                XenStore node (under /local/domain/NNN/) for this
+                backend device.
+
+What:		/sys/bus/xen-backend/devices/vbd-*/physical_device
+Date:		April 2011
+KernelVersion:	3.0
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+                The major:minor number (in hexidecimal) of the
+                physical device providing the storage for this backend
+                block device.
+
+What:		/sys/bus/xen-backend/devices/vbd-*/mode
+Date:		April 2011
+KernelVersion:	3.0
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+                Whether the block device is read-only ('r') or
+                read-write ('w').
+
+What:		/sys/bus/xen-backend/devices/vbd-*/statistics/f_req
+Date:		April 2011
+KernelVersion:	3.0
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+                Number of flush requests from the frontend.
+
+What:		/sys/bus/xen-backend/devices/vbd-*/statistics/oo_req
+Date:		April 2011
+KernelVersion:	3.0
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+                Number of requests delayed because the backend was too
+                busy processing previous requests.
+
+What:		/sys/bus/xen-backend/devices/vbd-*/statistics/rd_req
+Date:		April 2011
+KernelVersion:	3.0
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+                Number of read requests from the frontend.
+
+What:		/sys/bus/xen-backend/devices/vbd-*/statistics/rd_sect
+Date:		April 2011
+KernelVersion:	3.0
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+                Number of sectors read by the frontend.
+
+What:		/sys/bus/xen-backend/devices/vbd-*/statistics/wr_req
+Date:		April 2011
+KernelVersion:	3.0
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+                Number of write requests from the frontend.
+
+What:		/sys/bus/xen-backend/devices/vbd-*/statistics/wr_sect
+Date:		April 2011
+KernelVersion:	3.0
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+                Number of sectors written by the frontend.

Documentation/ABI/stable/sysfs-devices-system-xen_memory

@@ -0,0 +1,77 @@
+What:		/sys/devices/system/xen_memory/xen_memory0/max_retry_count
+Date:		May 2011
+KernelVersion:	2.6.39
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+		The maximum number of times the balloon driver will
+		attempt to increase the balloon before giving up.  See
+		also 'retry_count' below.
+		A value of zero means retry forever and is the default one.
+
+What:		/sys/devices/system/xen_memory/xen_memory0/max_schedule_delay
+Date:		May 2011
+KernelVersion:	2.6.39
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+		The limit that 'schedule_delay' (see below) will be
+		increased to. The default value is 32 seconds.
+
+What:		/sys/devices/system/xen_memory/xen_memory0/retry_count
+Date:		May 2011
+KernelVersion:	2.6.39
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+		The current number of times that the balloon driver
+		has attempted to increase the size of the balloon.
+		The default value is one. With max_retry_count being
+		zero (unlimited), this means that the driver will attempt
+		to retry with a 'schedule_delay' delay.
+
+What:		/sys/devices/system/xen_memory/xen_memory0/schedule_delay
+Date:		May 2011
+KernelVersion:	2.6.39
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+		The time (in seconds) to wait between attempts to
+		increase the balloon.  Each time the balloon cannot be
+		increased, 'schedule_delay' is increased (until
+		'max_schedule_delay' is reached at which point it
+		will use the max value).
+
+What:		/sys/devices/system/xen_memory/xen_memory0/target
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+		The target number of pages to adjust this domain's
+		memory reservation to.
+
+What:		/sys/devices/system/xen_memory/xen_memory0/target_kb
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+		As target above, except the value is in KiB.
+
+What:		/sys/devices/system/xen_memory/xen_memory0/info/current_kb
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+		Current size (in KiB) of this domain's memory
+		reservation.
+
+What:		/sys/devices/system/xen_memory/xen_memory0/info/high_kb
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+		Amount (in KiB) of high memory in the balloon.
+
+What:		/sys/devices/system/xen_memory/xen_memory0/info/low_kb
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+		Amount (in KiB) of low (or normal) memory in the
+		balloon.

Documentation/ABI/testing/sysfs-bus-pci

@@ -66,6 +66,24 @@ Description:
 		re-discover previously removed devices.
 		Depends on CONFIG_HOTPLUG.
 
+What:		/sys/bus/pci/devices/.../msi_irqs/
+Date:		September, 2011
+Contact:	Neil Horman <nhorman@tuxdriver.com>
+Description:
+		The /sys/devices/.../msi_irqs directory contains a variable set
+		of sub-directories, with each sub-directory being named after a
+		corresponding msi irq vector allocated to that device.  Each
+		numbered sub-directory N contains attributes of that irq.
+		Note that this directory is not created for device drivers which
+		do not support msi irqs
+
+What:		/sys/bus/pci/devices/.../msi_irqs/<N>/mode
+Date:		September 2011
+Contact:	Neil Horman <nhorman@tuxdriver.com>
+Description:
+		This attribute indicates the mode that the irq vector named by
+		the parent directory is in (msi vs. msix)
+
 What:		/sys/bus/pci/devices/.../remove
 Date:		January 2009
 Contact:	Linux PCI developers <linux-pci@vger.kernel.org>

Documentation/ABI/testing/sysfs-bus-usb

@@ -119,6 +119,31 @@ Description:
 		Write a 1 to force the device to disconnect
 		(equivalent to unplugging a wired USB device).
 
+What:		/sys/bus/usb/drivers/.../new_id
+Date:		October 2011
+Contact:	linux-usb@vger.kernel.org
+Description:
+		Writing a device ID to this file will attempt to
+		dynamically add a new device ID to a USB device driver.
+		This may allow the driver to support more hardware than
+		was included in the driver's static device ID support
+		table at compile time. The format for the device ID is:
+		idVendor idProduct bInterfaceClass.
+		The vendor ID and device ID fields are required, the
+		interface class is optional.
+		Upon successfully adding an ID, the driver will probe
+		for the device and attempt to bind to it.  For example:
+		# echo "8086 10f5" > /sys/bus/usb/drivers/foo/new_id
+
+What:		/sys/bus/usb-serial/drivers/.../new_id
+Date:		October 2011
+Contact:	linux-usb@vger.kernel.org
+Description:
+		For serial USB drivers, this attribute appears under the
+		extra bus folder "usb-serial" in sysfs; apart from that
+		difference, all descriptions from the entry
+		"/sys/bus/usb/drivers/.../new_id" apply.
+
 What:		/sys/bus/usb/drivers/.../remove_id
 Date:		November 2009
 Contact:	CHENG Renquan <rqcheng@smu.edu.sg>

Documentation/ABI/testing/sysfs-class-rtc-rtc0-device-rtc_calibration

@@ -0,0 +1,12 @@
+What:           Attribute for calibrating ST-Ericsson AB8500 Real Time Clock
+Date:           Oct 2011
+KernelVersion:  3.0
+Contact:        Mark Godfrey <mark.godfrey@stericsson.com>
+Description:    The rtc_calibration attribute allows the userspace to
+                calibrate the AB8500.s 32KHz Real Time Clock.
+                Every 60 seconds the AB8500 will correct the RTC's value
+                by adding to it the value of this attribute.
+                The range of the attribute is -127 to +127 in units of
+                30.5 micro-seconds (half-parts-per-million of the 32KHz clock)
+Users:          The /vendor/st-ericsson/base_utilities/core/rtc_calibration
+                daemon uses this interface.

Documentation/ABI/testing/sysfs-devices-platform-docg3

@@ -0,0 +1,34 @@
+What:		/sys/devices/platform/docg3/f[0-3]_dps[01]_is_keylocked
+Date:		November 2011
+KernelVersion:	3.3
+Contact:	Robert Jarzmik <robert.jarzmik@free.fr>
+Description:
+		Show whether the floor (0 to 4), protection area (0 or 1) is
+		keylocked. Each docg3 chip (or floor) has 2 protection areas,
+		which can cover any part of it, block aligned, called DPS.
+		The protection has information embedded whether it blocks reads,
+		writes or both.
+		The result is:
+		0 -> the DPS is not keylocked
+		1 -> the DPS is keylocked
+Users:		None identified so far.
+
+What:		/sys/devices/platform/docg3/f[0-3]_dps[01]_protection_key
+Date:		November 2011
+KernelVersion:	3.3
+Contact:	Robert Jarzmik <robert.jarzmik@free.fr>
+Description:
+		Enter the protection key for the floor (0 to 4), protection area
+		(0 or 1). Each docg3 chip (or floor) has 2 protection areas,
+		which can cover any part of it, block aligned, called DPS.
+		The protection has information embedded whether it blocks reads,
+		writes or both.
+		The protection key is a string of 8 bytes (value 0-255).
+		Entering the correct value toggle the lock, and can be observed
+		through f[0-3]_dps[01]_is_keylocked.
+		Possible values are:
+			- 8 bytes
+		Typical values are:
+			- "00000000"
+			- "12345678"
+Users:		None identified so far.

Documentation/ABI/testing/sysfs-driver-hid-logitech-lg4ff

@@ -1,7 +1,7 @@
 What:		/sys/module/hid_logitech/drivers/hid:logitech/<dev>/range.
 Date:		July 2011
 KernelVersion:	3.2
-Contact:	Michal Mal� <madcatxster@gmail.com>
+Contact:	Michal Malý <madcatxster@gmail.com>
 Description:	Display minimum, maximum and current range of the steering
 		wheel. Writing a value within min and max boundaries sets the
 		range of the wheel.

Documentation/ABI/testing/sysfs-driver-hid-multitouch

@@ -0,0 +1,9 @@
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/quirks
+Date:		November 2011
+Contact:	Benjamin Tissoires <benjamin.tissoires@gmail.com>
+Description:	The integer value of this attribute corresponds to the
+		quirks actually in place to handle the device's protocol.
+		When read, this attribute returns the current settings (see
+		MT_QUIRKS_* in hid-multitouch.c).
+		When written this attribute change on the fly the quirks, then
+		the protocol to handle the device.