Skip to content
Commits on Dec 31, 2012
  1. @bmcdorman
Commits on Nov 16, 2012
Commits on Nov 9, 2012
Commits on Nov 8, 2012
  1. making sure es8328 leaves ssp3 alone

    Josh S committed Nov 8, 2012
  2. switching SSP3 pins back to AF3

    Josh S committed Nov 8, 2012
Commits on Nov 2, 2012
  1. trying SSRC0_PSP again (instead of Motorola)

    Josh S committed Nov 2, 2012
  2. missing ; at end of printk

    Josh S committed Nov 2, 2012
  3. cleaning up and adding more printks

    Josh S committed Nov 2, 2012
  4. switching back to motorola for now on pxa2xx_spi, showing SSCR0 and S…

    …SCR1 in pump_transfers
    Josh S committed Nov 2, 2012
Commits on Nov 1, 2012
  1. removing clk_disable and clk_enable in ssp.c

    Josh S committed Nov 1, 2012
Commits on Oct 26, 2012
  1. fixing extra / in comment

    Josh S committed Oct 26, 2012
  2. disabling pxa2xx for aspenite

    Josh S committed Oct 26, 2012
Commits on Oct 19, 2012
Commits on Oct 5, 2012
  1. kovan-defconfig: Enable SPI and spidev

    Sean Cross committed Oct 5, 2012
  2. kovan: Add SPI devices to machine definition

    This adds SPI3 and SPI4 as available devices, and allows them to work
    with spidev.  This gives developers the ability to work with SPI from
    userspace without recompiling the kernel.
    Sean Cross committed Oct 5, 2012
  3. pxa168: Add SSP clocks for missing SSP devices

    Only SSP0 and SSP1 had clocks.  This adds the other two.
    Sean Cross committed Oct 5, 2012
Commits on Oct 3, 2012
  1. kovan-defconfig: Enable many USB modules

    This patch causes many more USB modules to be compiled, all of which
    may prove useful to people hacking on the platform.
    Sean Cross committed Oct 3, 2012
Commits on Jun 27, 2012
  1. kovan: Fix USB OTG by setting device type to "B"

    Previously, there was no check to determine whether a device was
    in the "B" state or the "A" state.  This explicitly adds a check
    to reflect this value.
    Sean Cross committed Jun 27, 2012
Commits on Jun 21, 2012
  1. stmpe-ts: Fix mouse click

    Previously, the mousebutton event was always mouseup, rather than
    a mousedown when a touch was started, followed by a mouseup upon
    release.  This patch makes the mousedown report a BTN_TOUCH.
    Sean Cross committed Jun 21, 2012
Commits on Jun 20, 2012
  1. kovan: Add MFP_43 to exported GPIOs

    MFP_43 is the AC_PRESENT pin.
    Sean Cross committed Jun 20, 2012
  2. kovan: Add MFP_79 to list of GPIOs

    MFP_79 is the FPGA ADC8/Battery selection switch.  When high,
    this measures the battery.  When low, measures ADC8.
    Sean Cross committed Jun 20, 2012
  3. stmpe-ts: Patch to provide mouse button clicks

    The touchscreen provides ABS_PRESSURE values, but didn't provide
    BTN values.  This patch adds in the BTN reporting.
    Sean Cross committed Jun 20, 2012
  4. usb: Fix USB re-probing

    This should allow USB gadget modules to be removed and re-inserted.
    Sean Cross committed Jun 20, 2012
Commits on May 31, 2012
  1. kovan: Add usbtest to defconfig

    This will be used in the factory to verify the microUSB and onboard
    connectors are soldered properly.
    Sean Cross committed May 31, 2012
Commits on Apr 20, 2012
  1. pxa168fb: Copy over boot logo during probe()

    The bootloader leaves the logo in place.  During init, copy this
    logo over from its old location to the new one.
    Sean Cross committed Apr 20, 2012
  2. pxa168fb: Fix panic when DEBUG is enabled

    Many calls to dev_dbg() attempt to dereference a variable that,
    without this patch, is NULL.
    Sean Cross committed Apr 20, 2012
Something went wrong with that request. Please try again.