SAIO 20171003-1

@kiteretro kiteretro released this Oct 3, 2017 · 1 commit to master since this release

  • FIXED BUG where theme change wouldn't get saved
  • FIXED BUG where theme showed a 1px thin line in the middle
  • Based on retropie 4.3
    • SSH is disabled by default, enable it with the rpi-config
  • Default theme set to PIXEL
  • WIFI ON/OFF now applies to the ZeroW AND Pi3 :) The icon also now shows the connection status and signal strength!
  • USB Audio for splash screens enabled
  • USB Audio for N64 enabled
  • 30 seconds VRAM autosave enabled
  • OPTIONAL (NOT NEEDED): Upgrade the Arduino code by using the .ino in the 'sources' directory.
    • There is a 'flasher' directory on the SAIO, this can be used to update the Arduino but it is probably better to do it from a PC with the .ino files

SAIO 20170928-1

@kiteretro kiteretro released this Sep 28, 2017 · 3 commits to master since this release

  • Based on retropie 4.3
    • SSH is disabled by default, enable it with the rpi-config
  • Default theme set to PIXEL
  • WIFI ON/OFF now applies to the ZeroW AND Pi3 :) The icon also now shows the connection status and signal strength!
  • USB Audio for splash screens enabled
  • USB Audio for N64 enabled
  • 30 seconds VRAM autosave enabled
  • It is advisable to upgrade the Arduino code by using the .ino in the 'sources' directory.
    • There is a 'flasher' directory on the SAIO, this can be used to update the Arduino but it is probably better to do it from a PC with the .ino files

SAIO 20170401-1

@kiteretro kiteretro released this Apr 1, 2017 · 53 commits to master since this release

  • Based on retropie 4.2
    • SSH is disabled by default, enable it with the rpi-config
  • Fixed the FAN ENABLE code so that it reacts to temperature
    • On powerup, the fan will be ON until the script has loaded up, where it will check the temperature and if under 60*C then it will turn it off
  • It is advisable to upgrade the Arduino code by using the .ino in the 'sources' directory.. updating from within RetroPie coming soon!

SAIO 20170314-1

@kiteretro kiteretro released this Mar 15, 2017 · 53 commits to master since this release

  • Based on retropie 4.1.20
    • SSH is disabled by default, enable it with the rpi-config
  • retropie-4.1.20-rpi1_zero_SAIO_20170314-215609.zip
    • Pi Zero + W version
  • retropie-4.1.20-rpi2_rpi3_SAIO_20170314-220530.zip
    • Pi2 and Pi3 version

SAIO 20170313-1

@kiteretro kiteretro released this Mar 14, 2017 · 53 commits to master since this release

  • Single image per board type
  • config-saio.txt in the boot directory (accessible by plugging into PC) to change between NORMAL and TESTER modes
  • Added Pi Zero W support (note the image seems to have SSH disabled by default)
  • New and better scripts
  • Tester now DOES NOT POWER OFF BY SWITCH, instead it now prints the GPIO state for debug
  • retropie-4.1-rpi1_zero_SAIO_20170313-1
    • Pi Zero version ONLY
  • retropie-4.1.18-rpi1_zero_SAIO_20170313-1
    • Pi Zero W version (also works for the normal Zero too!)
  • retropie-4.1-rpi2_rpi3_SAIO_20170313-1
    • Pi2 and Pi3 version

SAIO 20170301-5

@kiteretro kiteretro released this Mar 2, 2017 · 62 commits to master since this release

  • Fixed MUTE icon being inverted
  • Now possible to run git pull in the Super-AIO directory to update everything to latest version
  • Based on retropie-4.1-rpi1_zero (https://retropie.org.uk/download/)
  • PI ZERO + PI3 Versions available
  • SAIO and TESTER in /home/pi/Super-AIO/release directory
  • Cronjob to run saio-osd.py on boot
  • FLASHER included in /home/pi/Super-AIO/release/saio/flash/ with SAIO_v2a_20170225_1_with_bootloader_leonardo.hex
  • retropie-4.1-rpi1_zero_saio-20170301-5
    • For normal use, use this!
  • retropie-4.1-rpi1_zero_saio_tester-20170301-5
    -Testing image, runs the tester on boot to check USB and DPI LCD
    • Pi Zero ONLY
  • retropie-4.1-rpi2_rpi3_saio-20170301-5.zip
    • Pi3 for normal use

SAIO 20170223-4

@kiteretro kiteretro released this Feb 26, 2017 · 67 commits to master since this release

!!! PRE MADE IMAGES ARE BEING UPADTED !!!

  • Based on retropie-4.1-rpi1_zero (https://retropie.org.uk/download/)
  • PI ZERO ONLY
  • SAIO and TESTER in /home/pi directory
  • Cronjob to run saio-osd.py on boot
  • FLASHER included in /home/pi/saio/flash/ with SAIO_v2a_20170225_1_with_bootloader_leonardo.hex
  • retropie-4.1-rpi1_zero_saio-20170223-4
    • For normal use, use this!
  • retropie-4.1-rpi1_zero_saio_tester-20170223-4
    • Testing image, runs the tester on boot to check USB and DPI LCD