Connected: True
Creating debug file
Debug file created




All available register groups: ['REG_GROUP_DEVICETIME', 'REG_GROUP_OPERATIONAL_OPERATION', 'REG_GROUP_OPERATIONAL_STATUS', 'REG_GROUP_TEMPERATURES', 'REG_GROUP_OPERATIONAL_TIME', 'REG_GROUP_HEATING_CURVE', 'REG_GROUP_HEAT_PUMP', 'REG_GROUP_POOL', 'REG_GROUP_HOT_WATER', 'REG_GROUP_IMMERSION_HEATER', 'REG_GROUP_SOFTWARE_VERSIONS', 'REG_GROUP_CALIBRATION', 'REG_GROUP_BUFFER_TANK', 'REG_GROUP_DEFROSTING', 'REG_GROUP_COOLING', 'REG_GROUP_HEATING_CURVE_CIRC1', 'REG_GROUP_HEATING_CURVE_CIRC2', 'REG_ERROR_CODES', 'REG_OPTIMUM', 'REG_GROUP_IMMERSION_HEATER_AUX', 'REG_GROUP_TEMPERATURES_SLAVE', 'REG_GROUP_OPERATIONAL_DIAGNOSTICS', 'REG_GROUP_CALENDAR']
Available registers for 'REG_GROUP_HEATING_CURVE' group: ['REG_HEATING_HEAT_CURVE', 'REG_HEATING_HEAT_CURVE_MIN', 'REG_HEATING_HEAT_CURVE_MAX', 'REG_HEATING_CURVE_PLUS5', 'REG_HEATING_CURVE_0', 'REG_HEATING_CURVE_MINUS5', 'REG_HEATING_HEAT_STOP', 'REG_HEATING_ROOM_FACTOR']


Other temperatures
Supply Line Temperature: 27.0
Desired Supply Line Temperature: 28.0
Return Line Temperature: None
Brine Out Temperature: None
Pool Temperature: None
Brine In Temperature: None
Cooling Tank Temperature: None
Cooling Supply Line Temperature: None


Operational status
Operational status: None
Available operational statuses: ['COOLING', 'POOL', 'DEFROST', 'HEATING', 'HOT_WATER', 'RADIATORPUMP', 'COMPR']
Available operational statuses map: ChainMap({1: 'COMPR'}, {2: 'RADIATORPUMP'}, {8: 'HOT_WATER'}, {16: 'HEATING'}, {32: 'DEFROST'}, {64: 'POOL'}, {128: 'COOLING'})
Auxiliary heater 3KW: None
Auxiliary heater 6KW: None
Auxiliary heater 9KW: None
Auxiliary heater 12KW: None
Auxiliary heater 15KW: None
Compressor status: None
Brine pump status: None
Radiator pump status: None
Cooling status: None
Hot water status: None
Heating status: None
Integral: None
Pid: 15.0


Operational Times
Compressor Operational Time: 27571.0
Hot Water Operational Time: 3036.0
Auxiliary Heater 1 Operational Time: 539.0
Auxiliary Heater 2 Operational Time: 275.0
Auxiliary Heater 3 Operational Time: 0.0


Alarms data
Active Alarm Count: 0


Operation Mode data
Operation Mode: AUTO
Available Operation Modes: ['HOT_WATER', 'AUXILIARY', 'COMPRESSOR', 'AUTO', 'OFF']
Available Operation Modes Map: ChainMap({0: 'OFF'}, {1: 'AUTO'}, {2: 'COMPRESSOR'}, {3: 'AUXILIARY'}, {4: 'HOT_WATER'})
Is Operation Mode Read Only: False


Hot Water data
Hot Water Switch State: 1
Hot Water Boost Switch State: None


Available historical data registers: ['REG_OPER_DATA_OUTDOOR_TEMP_MA_SA', 'REG_INDOOR_TEMPERATURE', 'REG_OPER_DATA_SUPPLY_MA_SA', 'REG_DESIRED_SUPPLY_LINE_TEMP', 'REG_HOT_WATER_TEMPERATURE', 'REG_DESIRED_SYS_SUPPLY_LINE_TEMP', 'REG_OPER_DATA_DISTR_CIR2', 'REG_OPER_DATA_POOL', 'REG_OPER_TIME_COMPRESSOR', 'REG_OPER_TIME_HEATING', 'REG_OPER_TIME_HOT_WATER', 'REG_OPER_TIME_IMM1', 'REG_OPER_TIME_IMM2', 'REG_OPER_TIME_IMM3']
Historical data for outdoor temperature during past 24h: None


Heating Curve Register Data: {'id': 10045, 'isReadOnly': False, 'minValue': 22.0, 'maxValue': 56.0, 'step': 1.0, 'value': 31.0}


Heat Temperature: 20
Operation Mode: AUTO
Available Operation Modes: ['HOT_WATER', 'AUXILIARY', 'COMPRESSOR', 'AUTO', 'OFF']
Hot Water Switch State: 1
Hot Water Boost Switch State: None