Permalink
Switch branches/tags
Find file Copy path
383 lines (357 sloc) 19.2 KB
/*
Copyright 2015 The Kubernetes Authors.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
package config
import (
"k8s.io/api/core/v1"
metav1 "k8s.io/apimachinery/pkg/apis/meta/v1"
)
// HairpinMode denotes how the kubelet should configure networking to handle
// hairpin packets.
type HairpinMode string
// Enum settings for different ways to handle hairpin packets.
const (
// Set the hairpin flag on the veth of containers in the respective
// container runtime.
HairpinVeth = "hairpin-veth"
// Make the container bridge promiscuous. This will force it to accept
// hairpin packets, even if the flag isn't set on ports of the bridge.
PromiscuousBridge = "promiscuous-bridge"
// Neither of the above. If the kubelet is started in this hairpin mode
// and kube-proxy is running in iptables mode, hairpin packets will be
// dropped by the container bridge.
HairpinNone = "none"
)
// ResourceChangeDetectionStrategy denotes a mode in which internal
// managers (secret, configmap) are discovering object changes.
type ResourceChangeDetectionStrategy string
// Enum settings for different strategies of kubelet managers.
const (
// GetChangeDetectionStrategy is a mode in which kubelet fetches
// necessary objects directly from apiserver.
GetChangeDetectionStrategy ResourceChangeDetectionStrategy = "Get"
// TTLCacheChangeDetectionStrategy is a mode in which kubelet uses
// ttl cache for object directly fetched from apiserver.
TTLCacheChangeDetectionStrategy ResourceChangeDetectionStrategy = "Cache"
// WatchChangeDetectionStrategy is a mode in which kubelet uses
// watches to observe changes to objects that are in its interest.
WatchChangeDetectionStrategy ResourceChangeDetectionStrategy = "Watch"
)
// +k8s:deepcopy-gen:interfaces=k8s.io/apimachinery/pkg/runtime.Object
// KubeletConfiguration contains the configuration for the Kubelet
type KubeletConfiguration struct {
metav1.TypeMeta
// staticPodPath is the path to the directory containing local (static) pods to
// run, or the path to a single static pod file.
StaticPodPath string
// syncFrequency is the max period between synchronizing running
// containers and config
SyncFrequency metav1.Duration
// fileCheckFrequency is the duration between checking config files for
// new data
FileCheckFrequency metav1.Duration
// httpCheckFrequency is the duration between checking http for new data
HTTPCheckFrequency metav1.Duration
// staticPodURL is the URL for accessing static pods to run
StaticPodURL string
// staticPodURLHeader is a map of slices with HTTP headers to use when accessing the podURL
StaticPodURLHeader map[string][]string
// address is the IP address for the Kubelet to serve on (set to 0.0.0.0
// for all interfaces)
Address string
// port is the port for the Kubelet to serve on.
Port int32
// readOnlyPort is the read-only port for the Kubelet to serve on with
// no authentication/authorization (set to 0 to disable)
ReadOnlyPort int32
// tlsCertFile is the file containing x509 Certificate for HTTPS. (CA cert,
// if any, concatenated after server cert). If tlsCertFile and
// tlsPrivateKeyFile are not provided, a self-signed certificate
// and key are generated for the public address and saved to the directory
// passed to the Kubelet's --cert-dir flag.
TLSCertFile string
// tlsPrivateKeyFile is the file containing x509 private key matching tlsCertFile
TLSPrivateKeyFile string
// TLSCipherSuites is the list of allowed cipher suites for the server.
// Values are from tls package constants (https://golang.org/pkg/crypto/tls/#pkg-constants).
TLSCipherSuites []string
// TLSMinVersion is the minimum TLS version supported.
// Values are from tls package constants (https://golang.org/pkg/crypto/tls/#pkg-constants).
TLSMinVersion string
// rotateCertificates enables client certificate rotation. The Kubelet will request a
// new certificate from the certificates.k8s.io API. This requires an approver to approve the
// certificate signing requests. The RotateKubeletClientCertificate feature
// must be enabled.
RotateCertificates bool
// serverTLSBootstrap enables server certificate bootstrap. Instead of self
// signing a serving certificate, the Kubelet will request a certificate from
// the certificates.k8s.io API. This requires an approver to approve the
// certificate signing requests. The RotateKubeletServerCertificate feature
// must be enabled.
ServerTLSBootstrap bool
// authentication specifies how requests to the Kubelet's server are authenticated
Authentication KubeletAuthentication
// authorization specifies how requests to the Kubelet's server are authorized
Authorization KubeletAuthorization
// registryPullQPS is the limit of registry pulls per second.
// Set to 0 for no limit.
RegistryPullQPS int32
// registryBurst is the maximum size of bursty pulls, temporarily allows
// pulls to burst to this number, while still not exceeding registryPullQPS.
// Only used if registryPullQPS > 0.
RegistryBurst int32
// eventRecordQPS is the maximum event creations per second. If 0, there
// is no limit enforced.
EventRecordQPS int32
// eventBurst is the maximum size of a burst of event creations, temporarily
// allows event creations to burst to this number, while still not exceeding
// eventRecordQPS. Only used if eventRecordQPS > 0.
EventBurst int32
// enableDebuggingHandlers enables server endpoints for log collection
// and local running of containers and commands
EnableDebuggingHandlers bool
// enableContentionProfiling enables lock contention profiling, if enableDebuggingHandlers is true.
EnableContentionProfiling bool
// healthzPort is the port of the localhost healthz endpoint (set to 0 to disable)
HealthzPort int32
// healthzBindAddress is the IP address for the healthz server to serve on
HealthzBindAddress string
// oomScoreAdj is The oom-score-adj value for kubelet process. Values
// must be within the range [-1000, 1000].
OOMScoreAdj int32
// clusterDomain is the DNS domain for this cluster. If set, kubelet will
// configure all containers to search this domain in addition to the
// host's search domains.
ClusterDomain string
// clusterDNS is a list of IP addresses for a cluster DNS server. If set,
// kubelet will configure all containers to use this for DNS resolution
// instead of the host's DNS servers.
ClusterDNS []string
// streamingConnectionIdleTimeout is the maximum time a streaming connection
// can be idle before the connection is automatically closed.
StreamingConnectionIdleTimeout metav1.Duration
// nodeStatusUpdateFrequency is the frequency that kubelet computes node
// status. If node lease feature is not enabled, it is also the frequency that
// kubelet posts node status to master. In that case, be cautious when
// changing the constant, it must work with nodeMonitorGracePeriod in nodecontroller.
NodeStatusUpdateFrequency metav1.Duration
// nodeStatusReportFrequency is the frequency that kubelet posts node
// status to master if node status does not change. Kubelet will ignore this
// frequency and post node status immediately if any change is detected. It is
// only used when node lease feature is enabled.
NodeStatusReportFrequency metav1.Duration
// nodeLeaseDurationSeconds is the duration the Kubelet will set on its corresponding Lease.
NodeLeaseDurationSeconds int32
// imageMinimumGCAge is the minimum age for an unused image before it is
// garbage collected.
ImageMinimumGCAge metav1.Duration
// imageGCHighThresholdPercent is the percent of disk usage after which
// image garbage collection is always run. The percent is calculated as
// this field value out of 100.
ImageGCHighThresholdPercent int32
// imageGCLowThresholdPercent is the percent of disk usage before which
// image garbage collection is never run. Lowest disk usage to garbage
// collect to. The percent is calculated as this field value out of 100.
ImageGCLowThresholdPercent int32
// How frequently to calculate and cache volume disk usage for all pods
VolumeStatsAggPeriod metav1.Duration
// KubeletCgroups is the absolute name of cgroups to isolate the kubelet in
KubeletCgroups string
// SystemCgroups is absolute name of cgroups in which to place
// all non-kernel processes that are not already in a container. Empty
// for no container. Rolling back the flag requires a reboot.
SystemCgroups string
// CgroupRoot is the root cgroup to use for pods.
// If CgroupsPerQOS is enabled, this is the root of the QoS cgroup hierarchy.
CgroupRoot string
// Enable QoS based Cgroup hierarchy: top level cgroups for QoS Classes
// And all Burstable and BestEffort pods are brought up under their
// specific top level QoS cgroup.
CgroupsPerQOS bool
// driver that the kubelet uses to manipulate cgroups on the host (cgroupfs or systemd)
CgroupDriver string
// CPUManagerPolicy is the name of the policy to use.
// Requires the CPUManager feature gate to be enabled.
CPUManagerPolicy string
// CPU Manager reconciliation period.
// Requires the CPUManager feature gate to be enabled.
CPUManagerReconcilePeriod metav1.Duration
// Map of QoS resource reservation percentages (memory only for now).
// Requires the QOSReserved feature gate to be enabled.
QOSReserved map[string]string
// runtimeRequestTimeout is the timeout for all runtime requests except long running
// requests - pull, logs, exec and attach.
RuntimeRequestTimeout metav1.Duration
// hairpinMode specifies how the Kubelet should configure the container
// bridge for hairpin packets.
// Setting this flag allows endpoints in a Service to loadbalance back to
// themselves if they should try to access their own Service. Values:
// "promiscuous-bridge": make the container bridge promiscuous.
// "hairpin-veth": set the hairpin flag on container veth interfaces.
// "none": do nothing.
// Generally, one must set --hairpin-mode=hairpin-veth to achieve hairpin NAT,
// because promiscuous-bridge assumes the existence of a container bridge named cbr0.
HairpinMode string
// maxPods is the number of pods that can run on this Kubelet.
MaxPods int32
// The CIDR to use for pod IP addresses, only used in standalone mode.
// In cluster mode, this is obtained from the master.
PodCIDR string
// PodPidsLimit is the maximum number of pids in any pod.
PodPidsLimit int64
// ResolverConfig is the resolver configuration file used as the basis
// for the container DNS resolution configuration.
ResolverConfig string
// cpuCFSQuota enables CPU CFS quota enforcement for containers that
// specify CPU limits
CPUCFSQuota bool
// CPUCFSQuotaPeriod sets the CPU CFS quota period value, cpu.cfs_period_us, defaults to 100ms
CPUCFSQuotaPeriod metav1.Duration
// maxOpenFiles is Number of files that can be opened by Kubelet process.
MaxOpenFiles int64
// contentType is contentType of requests sent to apiserver.
ContentType string
// kubeAPIQPS is the QPS to use while talking with kubernetes apiserver
KubeAPIQPS int32
// kubeAPIBurst is the burst to allow while talking with kubernetes
// apiserver
KubeAPIBurst int32
// serializeImagePulls when enabled, tells the Kubelet to pull images one at a time.
SerializeImagePulls bool
// Map of signal names to quantities that defines hard eviction thresholds. For example: {"memory.available": "300Mi"}.
EvictionHard map[string]string
// Map of signal names to quantities that defines soft eviction thresholds. For example: {"memory.available": "300Mi"}.
EvictionSoft map[string]string
// Map of signal names to quantities that defines grace periods for each soft eviction signal. For example: {"memory.available": "30s"}.
EvictionSoftGracePeriod map[string]string
// Duration for which the kubelet has to wait before transitioning out of an eviction pressure condition.
EvictionPressureTransitionPeriod metav1.Duration
// Maximum allowed grace period (in seconds) to use when terminating pods in response to a soft eviction threshold being met.
EvictionMaxPodGracePeriod int32
// Map of signal names to quantities that defines minimum reclaims, which describe the minimum
// amount of a given resource the kubelet will reclaim when performing a pod eviction while
// that resource is under pressure. For example: {"imagefs.available": "2Gi"}
EvictionMinimumReclaim map[string]string
// podsPerCore is the maximum number of pods per core. Cannot exceed MaxPods.
// If 0, this field is ignored.
PodsPerCore int32
// enableControllerAttachDetach enables the Attach/Detach controller to
// manage attachment/detachment of volumes scheduled to this node, and
// disables kubelet from executing any attach/detach operations
EnableControllerAttachDetach bool
// protectKernelDefaults, if true, causes the Kubelet to error if kernel
// flags are not as it expects. Otherwise the Kubelet will attempt to modify
// kernel flags to match its expectation.
ProtectKernelDefaults bool
// If true, Kubelet ensures a set of iptables rules are present on host.
// These rules will serve as utility for various components, e.g. kube-proxy.
// The rules will be created based on IPTablesMasqueradeBit and IPTablesDropBit.
MakeIPTablesUtilChains bool
// iptablesMasqueradeBit is the bit of the iptables fwmark space to mark for SNAT
// Values must be within the range [0, 31]. Must be different from other mark bits.
// Warning: Please match the value of the corresponding parameter in kube-proxy.
// TODO: clean up IPTablesMasqueradeBit in kube-proxy
IPTablesMasqueradeBit int32
// iptablesDropBit is the bit of the iptables fwmark space to mark for dropping packets.
// Values must be within the range [0, 31]. Must be different from other mark bits.
IPTablesDropBit int32
// featureGates is a map of feature names to bools that enable or disable alpha/experimental
// features. This field modifies piecemeal the built-in default values from
// "k8s.io/kubernetes/pkg/features/kube_features.go".
FeatureGates map[string]bool
// Tells the Kubelet to fail to start if swap is enabled on the node.
FailSwapOn bool
// A quantity defines the maximum size of the container log file before it is rotated. For example: "5Mi" or "256Ki".
ContainerLogMaxSize string
// Maximum number of container log files that can be present for a container.
ContainerLogMaxFiles int32
// ConfigMapAndSecretChangeDetectionStrategy is a mode in which config map and secret managers are running.
ConfigMapAndSecretChangeDetectionStrategy ResourceChangeDetectionStrategy
/* the following fields are meant for Node Allocatable */
// A set of ResourceName=ResourceQuantity (e.g. cpu=200m,memory=150G) pairs
// that describe resources reserved for non-kubernetes components.
// Currently only cpu and memory are supported.
// See http://kubernetes.io/docs/user-guide/compute-resources for more detail.
SystemReserved map[string]string
// A set of ResourceName=ResourceQuantity (e.g. cpu=200m,memory=150G) pairs
// that describe resources reserved for kubernetes system components.
// Currently cpu, memory and local ephemeral storage for root file system are supported.
// See http://kubernetes.io/docs/user-guide/compute-resources for more detail.
KubeReserved map[string]string
// This flag helps kubelet identify absolute name of top level cgroup used to enforce `SystemReserved` compute resource reservation for OS system daemons.
// Refer to [Node Allocatable](https://git.k8s.io/community/contributors/design-proposals/node/node-allocatable.md) doc for more information.
SystemReservedCgroup string
// This flag helps kubelet identify absolute name of top level cgroup used to enforce `KubeReserved` compute resource reservation for Kubernetes node system daemons.
// Refer to [Node Allocatable](https://git.k8s.io/community/contributors/design-proposals/node/node-allocatable.md) doc for more information.
KubeReservedCgroup string
// This flag specifies the various Node Allocatable enforcements that Kubelet needs to perform.
// This flag accepts a list of options. Acceptable options are `pods`, `system-reserved` & `kube-reserved`.
// Refer to [Node Allocatable](https://git.k8s.io/community/contributors/design-proposals/node/node-allocatable.md) doc for more information.
EnforceNodeAllocatable []string
}
type KubeletAuthorizationMode string
const (
// KubeletAuthorizationModeAlwaysAllow authorizes all authenticated requests
KubeletAuthorizationModeAlwaysAllow KubeletAuthorizationMode = "AlwaysAllow"
// KubeletAuthorizationModeWebhook uses the SubjectAccessReview API to determine authorization
KubeletAuthorizationModeWebhook KubeletAuthorizationMode = "Webhook"
)
type KubeletAuthorization struct {
// mode is the authorization mode to apply to requests to the kubelet server.
// Valid values are AlwaysAllow and Webhook.
// Webhook mode uses the SubjectAccessReview API to determine authorization.
Mode KubeletAuthorizationMode
// webhook contains settings related to Webhook authorization.
Webhook KubeletWebhookAuthorization
}
type KubeletWebhookAuthorization struct {
// cacheAuthorizedTTL is the duration to cache 'authorized' responses from the webhook authorizer.
CacheAuthorizedTTL metav1.Duration
// cacheUnauthorizedTTL is the duration to cache 'unauthorized' responses from the webhook authorizer.
CacheUnauthorizedTTL metav1.Duration
}
type KubeletAuthentication struct {
// x509 contains settings related to x509 client certificate authentication
X509 KubeletX509Authentication
// webhook contains settings related to webhook bearer token authentication
Webhook KubeletWebhookAuthentication
// anonymous contains settings related to anonymous authentication
Anonymous KubeletAnonymousAuthentication
}
type KubeletX509Authentication struct {
// clientCAFile is the path to a PEM-encoded certificate bundle. If set, any request presenting a client certificate
// signed by one of the authorities in the bundle is authenticated with a username corresponding to the CommonName,
// and groups corresponding to the Organization in the client certificate.
ClientCAFile string
}
type KubeletWebhookAuthentication struct {
// enabled allows bearer token authentication backed by the tokenreviews.authentication.k8s.io API
Enabled bool
// cacheTTL enables caching of authentication results
CacheTTL metav1.Duration
}
type KubeletAnonymousAuthentication struct {
// enabled allows anonymous requests to the kubelet server.
// Requests that are not rejected by another authentication method are treated as anonymous requests.
// Anonymous requests have a username of system:anonymous, and a group name of system:unauthenticated.
Enabled bool
}
// +k8s:deepcopy-gen:interfaces=k8s.io/apimachinery/pkg/runtime.Object
// SerializedNodeConfigSource allows us to serialize NodeConfigSource
// This type is used internally by the Kubelet for tracking checkpointed dynamic configs.
// It exists in the kubeletconfig API group because it is classified as a versioned input to the Kubelet.
type SerializedNodeConfigSource struct {
metav1.TypeMeta
// Source is the source that we are serializing
// +optional
Source v1.NodeConfigSource
}