diff --git a/content/zh-cn/docs/tasks/administer-cluster/switch-to-evented-pleg.md b/content/zh-cn/docs/tasks/administer-cluster/switch-to-evented-pleg.md
new file mode 100644
index 0000000000000..124870b95d179
--- /dev/null
+++ b/content/zh-cn/docs/tasks/administer-cluster/switch-to-evented-pleg.md
@@ -0,0 +1,187 @@
+---
+title: 从轮询切换为基于 CRI 事件的更新来获取容器状态
+min-kubernetes-server-version: 1.26
+content_type: task
+weight: 90
+---
+<!--
+title: Switching from Polling to CRI Event-based Updates to Container Status
+min-kubernetes-server-version: 1.26
+content_type: task
+weight: 90
+-->
+
+{{< feature-state for_k8s_version="v1.27" state="beta" >}}
+
+<!-- overview -->
+
+<!--
+This page shows how to migrate nodes to use event based updates for container status. The event-based
+implementation reduces node resource consumption by the kubelet, compared to the legacy approach
+that relies on polling.
+You may know this feature as _evented Pod lifecycle event generator (PLEG)_. That's the name used
+internally within the Kubernetes project for a key implementation detail.
+
+The polling based approach is referred to as _generic PLEG_.
+-->
+本页展示了如何迁移节点以使用基于事件的更新来获取容器状态。
+与依赖轮询的传统方法相比，基于事件的实现可以减少 kubelet 对节点资源的消耗。
+你可以将这个特性称为**事件驱动的 Pod 生命周期事件生成器 (PLEG)**。
+这是在 Kubernetes 项目内部针对关键实现细节所用的名称。
+
+基于轮询的方法称为**通用 PLEG**。
+
+## {{% heading "prerequisites" %}}
+
+<!--
+* You need to run a version of Kubernetes that provides this feature.
+  Kubernetes v1.27 includes beta support for event-based container
+  status updates. The feature is beta but is _disabled_ by default
+  because it requires support from the container runtime.
+* {{< version-check >}}
+  If you are running a different version of Kubernetes, check the documentation for that release.
+-->
+* 你需要运行提供此特性的 Kubernetes 版本。
+  Kubernetes 1.27 提供了对基于事件更新容器状态的 Beta 支持。
+  此特性处于 Beta 阶段，默认被**禁用**。
+* {{< version-check >}}
+  如果你正在运行不同版本的 Kubernetes，请查阅对应版本的文档。
+<!--
+* The container runtime in use must support container lifecycle events.
+  The kubelet automatically switches back to the legacy generic PLEG
+  mechanism if the container runtime does not announce support for
+  container lifecycle events, even if you have this feature gate enabled.
+-->
+* 所使用的容器运行时必须支持容器生命周期事件。
+  如果容器运行时未声明对容器生命周期事件的支持，即使你已启用了此特性门控，
+  kubelet 也会自动切换回传统的通用 PLEG。
+
+<!-- steps -->
+
+<!--
+## Why switch to Evented PLEG?
+
+* The _Generic PLEG_ incurs non-negligible overhead due to frequent polling of container statuses.
+* This overhead is exacerbated by kubelet's parallelized polling of container states, thus limiting
+  its scalability and causing poor performance and reliability problems.
+* The goal of _Evented PLEG_ is to reduce unnecessary work during inactivity
+  by replacing periodic polling.
+-->
+## 为什么要切换到事件驱动的 PLEG？   {#why-switch-to-evented-pleg}
+
+* **通用 PLEG** 由于频繁轮询容器状态而产生了不可忽略的开销。
+* 这种开销会被 kubelet 的并行轮询容器状态的机制加剧，
+  限制了可扩缩性，还会导致性能和可靠性问题。
+* **事件驱动的 PLEG** 的目标是通过替换定期轮询来减少闲置时的非必要任务。
+
+<!--
+## Switching to Evented PLEG
+
+1. Start the kubelet with the [feature gate](/docs/reference/command-line-tools-reference/feature-gates/)
+   `EventedPLEG` enabled. You can manage the kubelet feature gates editing the kubelet
+   [config file](/docs/tasks/administer-cluster/kubelet-config-file/) and restarting the kubelet service.
+   You need to do this on each node where you are using this feature.
+-->
+## 切换为事件驱动的 PLEG   {#switching-to-evented-pleg}
+
+1. 启用[特性门控](/zh-cn/docs/reference/command-line-tools-reference/feature-gates/)
+   `EventedPLEG` 后启动 kubelet。
+   你可以通过编辑 kubelet [配置文件](/zh-cn/docs/tasks/administer-cluster/kubelet-config-file/)并重启
+   kubelet 服务来管理 kubelet 特性门控。
+   你需要在使用此特性的所有节点上执行此操作。
+
+<!--
+2. Make sure the node is [drained](/docs/tasks/administer-cluster/safely-drain-node/) before proceeding. 
+
+3. Start the container runtime with the container event generation enabled. 
+-->
+2. 确保节点被[腾空](/zh-cn/docs/tasks/administer-cluster/safely-drain-node/)后再继续。
+
+3. 启用容器事件生成后启动容器运行时。
+
+   {{< tabs name="tab_with_code" >}}
+
+   {{% tab name="containerd" %}}
+   <!--
+   Version 1.7+
+   -->
+   版本 1.7+
+
+   {{% /tab %}}
+
+   {{% tab name="CRI-O" %}}
+   <!--
+   Version 1.26+
+   
+   Check if the CRI-O is already configured to emit CRI events by verifying the configuration,
+   -->
+   版本 1.26+
+
+   通过验证配置，检查 CRI-O 是否已配置为发送 CRI 事件：
+
+   ```shell
+   crio config | grep enable_pod_events
+   ```
+
+   <!--
+   If it is enabled, the output should be similar to the following:
+   -->
+   如果已启用，输出应类似于：
+
+   ```none
+   enable_pod_events = true
+   ```
+
+   <!--
+   To enable it, start the CRI-O daemon with the flag `--enable-pod-events=true` or
+   use a dropin config with the following lines:
+   -->
+   要启用它，可使用 `--enable-pod-events=true` 标志或添加以下配置来启动 CRI-O 守护进程：
+
+   ```toml
+   [crio.runtime]
+   enable_pod_events: true
+   ```
+
+   {{% /tab %}}
+   {{< /tabs >}}
+
+   {{< version-check >}}
+
+<!--
+4. Verify that the kubelet is using event-based container stage change monitoring.
+   To check, look for the term `EventedPLEG` in the kubelet logs.
+
+   The output should be similar to this:
+-->
+4. 确认 kubelet 正使用基于事件的容器阶段变更监控。
+   要检查这一点，可在 kubelet 日志中查找 `EventedPLEG` 词条。
+
+   输出类似于：
+
+   ```console
+   I0314 11:10:13.909915 1105457 feature_gate.go:249] feature gates: &{map[EventedPLEG:true]}
+   ```
+
+   <!--
+   If you have set `--v` to 4 and above, you might see more entries that indicate
+   that the kubelet is using event-based container state monitoring.
+   -->
+   如果你将 `--v` 设置为 4 及更高值，你可能会看到更多条目表明
+   kubelet 正在使用基于事件的容器状态监控。
+
+   ```console
+   I0314 11:12:42.009542 1110177 evented.go:238] "Evented PLEG: Generated pod status from the received event" podUID=3b2c6172-b112-447a-ba96-94e7022912dc
+   I0314 11:12:44.623326 1110177 evented.go:238] "Evented PLEG: Generated pod status from the received event" podUID=b3fba5ea-a8c5-4b76-8f43-481e17e8ec40
+   I0314 11:12:44.714564 1110177 evented.go:238] "Evented PLEG: Generated pod status from the received event" podUID=b3fba5ea-a8c5-4b76-8f43-481e17e8ec40
+   ```
+
+## {{% heading "whatsnext" %}}
+
+<!--
+* Learn more about the design in the Kubernetes Enhancement Proposal (KEP):
+  [kubelet Evented PLEG for Better Performance](https://github.com/kubernetes/enhancements/blob/5b258a990adabc2ffdc9d84581ea6ed696f7ce6c/keps/sig-node/3386-kubelet-evented-pleg/README.md).
+-->
+* 进一步了解 Kubernetes 增强提案 (KEP)：
+  [kubelet Evented PLEG for Better Performance](https://github.com/kubernetes/enhancements/blob/5b258a990adabc2ffdc9d84581ea6ed696f7ce6c/keps/sig-node/3386-kubelet-evented-pleg/README.md)
+  中的设计理念。