New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Added firmware for Atheros Qualcomm Killer N1525 Wireless-AC [168c:003e] #2

Open
wants to merge 1 commit into
base: master
from

Conversation

@sumdog
Copy link

sumdog commented May 8, 2015

@theli-ua

This comment has been minimized.

Copy link

theli-ua commented May 13, 2015

Thanks, works perfectly fine for me on Alienware 15

@KiChjang

This comment has been minimized.

Copy link

KiChjang commented May 13, 2015

I am using Alienware 13 and I copied the files changed into /lib/firmware/QCA6174, but that still didn't work for me. The firmware crashed on startup.

$ dmesg --level=err

[ 3.000291] ath10k_pci 0000:01:00.0: firmware crashed! (uuid 2b02cdf2-3099-4343-8b61-6f8f9ac3f1b1)
[ 3.002381] ath10k_pci 0000:01:00.0: firmware register dump:
[ 3.002405] ath10k_pci 0000:01:00.0: [00]: 0x05010000 0x000015B3 0x0095186B 0x00955B31
[ 3.002434] ath10k_pci 0000:01:00.0: [04]: 0x0095186B 0x00060130 0x00000010 0x0040AF04
[ 3.002463] ath10k_pci 0000:01:00.0: [08]: 0x00000018 0x00000001 0x00000001 0x00412250
[ 3.002492] ath10k_pci 0000:01:00.0: [12]: 0x00000009 0x00000000 0x0096C09C 0x0096C0A7
[ 3.002520] ath10k_pci 0000:01:00.0: [16]: 0x0096BDBC 0x009286B6 0x00000000 0x00000000
[ 3.002549] ath10k_pci 0000:01:00.0: [20]: 0x4095186B 0x0040E160 0x0041F86C 0x00000001
[ 3.002577] ath10k_pci 0000:01:00.0: [24]: 0x80936238 0x0040E1C0 0x00000000 0xC095186B
[ 3.002606] ath10k_pci 0000:01:00.0: [28]: 0x80936361 0x0040E1E0 0x00000000 0x0041C91C
[ 3.002634] ath10k_pci 0000:01:00.0: [32]: 0x80934A67 0x0040E200 0x00436DF0 0x0040E250
[ 3.002663] ath10k_pci 0000:01:00.0: [36]: 0x809A606A 0x0040E250 0x00427608 0x00000001
[ 3.003489] ath10k_pci 0000:01:00.0: [40]: 0x809A60C2 0x0040E290 0x00426F98 0x00000004
[ 3.004310] ath10k_pci 0000:01:00.0: [44]: 0x809A61A2 0x0040E2B0 0x00426F98 0x0041C91C
[ 3.005127] ath10k_pci 0000:01:00.0: [48]: 0x800A0909 0x0040E2D0 0x00426F98 0x004275F8
[ 3.005927] ath10k_pci 0000:01:00.0: [52]: 0x800A024A 0x0040E2F0 0x0041ABF0 0x00420460
[ 3.006721] ath10k_pci 0000:01:00.0: [56]: 0x809287D9 0x0040E310 0x00000000 0x00400000
[ 4.993155] ath10k_pci 0000:01:00.0: ctl_resp never came in (-110)
[ 4.993165] ath10k_pci 0000:01:00.0: failed to connect to HTC: -110
[ 5.063687] ath10k_pci 0000:01:00.0: could not init core (-110)
[ 5.063714] ath10k_pci 0000:01:00.0: could not probe fw (-110)

@sumdog

This comment has been minimized.

Copy link

sumdog commented May 14, 2015

@KiChjang Did you build it as a kernel module and modprobe it with the skip_otp=y option? Are you using @kvalo kernel fork?

I'm using an MSI WS-60. What hardware are you using?

@KiChjang

This comment has been minimized.

Copy link

KiChjang commented May 14, 2015

@sumdog Yes, I used the skip_otp=y option, but I am not using kvalo's kernel fork. I am using an Alienware 13 with Killer Wireless N1525.

@sumdog

This comment has been minimized.

Copy link

sumdog commented May 14, 2015

I'd try using kvalo's fork. I haven't tried the stock 4.0.0 tree yet so I'm not sure if it has all the changes necessary. I'm not a kernel dev, so beyond that I'm not sure how to help. If you still have issues you might need to break out a kernel debugger or wait for one of the project maintainers to respond to this issue.

@mihab

This comment has been minimized.

Copy link

mihab commented Jun 6, 2015

Thanks, works perfectly on my msi gs70. @kvalo Could you please review the PR?

@ghost

This comment has been minimized.

Copy link

ghost commented Jun 6, 2015

many thanks , it seems to work perfectly on my Acer Aspire VN7-571G-5050.The wi-fi connection is stable , I'm currently stressing it with video streaming and downloads - no drops, no other problems.

@jamengual

This comment has been minimized.

Copy link

jamengual commented Jun 6, 2015

Work for me on 14.04 and 14.10 no problem in my MSI GS60 4k.
Only problem is that nvidia doesn't like 4.1 :(
Thanks for the hard work

@sumdog

This comment has been minimized.

Copy link

sumdog commented Jun 7, 2015

You have a MSI GS60? I've got the WS60. Does your bluetooth work? I
cannot get the ath3k to work for the life of me.

I put in a bug report on the kernel.org bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=99371

Sumit

On 07/06/15 07:25, PePe Amengual wrote:

Work for me on 14.04 and 14.10 no problem in my MSI GS60 4k.
Only problem is that nvidia doesn't like 4.1 :(


Reply to this email directly or view it on GitHub
#2 (comment).

@nostamp

This comment has been minimized.

Copy link

nostamp commented Jun 9, 2015

Working great on a Samsung NP940X3K-K02US running Debian 8. Stable enough to use daily for work without issue.

@pjoe

This comment has been minimized.

Copy link

pjoe commented Jun 9, 2015

Works for me on MSI GS60-2QE :)

I did cp firmware-4.bin to firmware-5.bin as dmesg reported it was looking for that.

[    7.836581] ath10k_pci 0000:05:00.0: qca6174 hw2.1 (0x05010000, 0x003405ff, 168c:003e:1a56:1525 fallback) fw killer-n1525-fw api 5 htt 3.0 wmi 4 cal otp max_sta 32

Also latest nvidia-352.09 from xorg-edgers is building and working with this kernel, if others should need that :)

@sumdog: I have same bluetooth issue, guessing it's the same atheros chip

@albertok

This comment has been minimized.

Copy link

albertok commented Jun 10, 2015

Thanks! Works perfectly including with Enterprise Authentication on Acer V 15 Nitro VN7-571G-70HF

@GottfriedHofmann

This comment has been minimized.

Copy link

GottfriedHofmann commented Jun 10, 2015

Thanks, working really well here on a MSI GS60 2QE - and thanks pjoe for the hint of chaning the number!

@pjoe

This comment has been minimized.

Copy link

pjoe commented Jun 10, 2015

@GottfriedHofmann: happy it works for you also :) ... and best of luck with BlenderDiplom.

(FYI: I'm with p3d.in)

@GottfriedHofmann

This comment has been minimized.

Copy link

GottfriedHofmann commented Jun 10, 2015

@pjoe wow - Blenderheads everywhere - nice to meet you here :)

@jackwpenick

This comment has been minimized.

Copy link

jackwpenick commented Jun 27, 2015

Took me a bit of time, but worked perfectly once I realized I put the ath10k options in the ath9k config file (oops). Merging this thing is essential to anybody who uses Lenovo laptops.

@giacomodabisias

This comment has been minimized.

Copy link

giacomodabisias commented Jun 29, 2015

I just read that a lot of people got it working on the gs60 2qe pro, but I did the procedure, booted into linux 4.1.0-wl-ath, but I still have no wifi :(
I followed your guide :

Works perfectly on my MSI GS70. This are the steps that I followed:

  1. Download

https://github.com/sumdog/ath10k-firmware/raw/5faf5bb7c7413f9bb332693179de54cca6fff58e/ath10k/QCA6174/hw2.1/board.bin

and put it in the /lib/firmware/ath10k/QCA6174/hw2.1/ folder (create the folder if it doesnt exist)

  1. Download

https://github.com/sumdog/ath10k-firmware/raw/5faf5bb7c7413f9bb332693179de54cca6fff58e/ath10k/QCA6174/hw2.1/firmware-4.bin

and put it in the /lib/firmware/ath10k/QCA6174/hw2.1/ folder

  1. Install dependencies to be able to compile the kernel with:

sudo apt-get install libncurses5-dev gcc make git exuberant-ctags

  1. Download kvalo's kernel tree from:

https://github.com/kvalo/ath/archive/master.zip

and extract it to a folder (no need to apply any patch, it's been merged already).

  1. Navigate to the extracted folder and run the following commands:

cp /boot/config-uname -r* .config

make -jX (where X is the number of processor cores, in my case 8)

(wait a while for it to compile, and after run)

sudo make modules_install install

  1. Create config file with:

sudo gedit /etc/modprobe.d/ath10k.conf

and put the following contents into the file:

options ath10k_core skip_otp=y

  1. Reboot using your new kernel 4.x.x-wl-ath
  2. Run ifconfig

Any ideas? do I miss something after booting into the system? dmesg gives nothing about ath10k..

@pjoe

This comment has been minimized.

Copy link

pjoe commented Jun 29, 2015

@giacomodabisias: did you try copying the firmware-4.bin file to firmware-5.bin? Maybe also check with dmesg if it manages to load the firmware.

@giacomodabisias

This comment has been minimized.

Copy link

giacomodabisias commented Jun 29, 2015

Thats the problem, dmesg doesn't say anything about ath10k (tried to grep).

@giacomodabisias

This comment has been minimized.

Copy link

giacomodabisias commented Jun 29, 2015

no idea why but rebuilding fixed it and now it works, great job!

@giacomodabisias

This comment has been minimized.

Copy link

giacomodabisias commented Jul 1, 2015

Just to let you know, with kernel 3.13.0-55-generic bluetooth is working

@ayeganov

This comment has been minimized.

Copy link

ayeganov commented Jul 1, 2015

I have Killer N1525 Combo installed on GS60 Ghost Pro-064.
I followed the steps outlined by @giacomodabisias, but didn't get the card working. I do get the following errors in dmesg:

[ 3.738782] ath10k_pci 0000:05:00.0: enabling device (0000 -> 0002)
[ 3.739011] ath10k_pci 0000:05:00.0: pci irq msi-x interrupts 8 irq_mode 0 reset_mode 0
[ 6.766975] ath10k_pci 0000:05:00.0: failed to receive initialized event from target: 80094210
[ 6.766997] ath10k_pci 0000:05:00.0: failed to wait for target after cold reset: -110
[ 6.766998] ath10k_pci 0000:05:00.0: failed to reset chip: -110
[ 6.767894] ath10k_pci: probe of 0000:05:00.0 failed with error -110

@Mil0dV

This comment has been minimized.

Copy link

Mil0dV commented Jul 7, 2015

For me this only worked with the rc7 version. I'm gonna retry eventually, but for now these are the steps that work for me:

https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1383184/comments/190

@rbange

This comment has been minimized.

Copy link

rbange commented Jul 9, 2015

I'm running the 4.1.0-rc7-wl-ath without any major issues with Ubuntu 15.04 on a VN7-571G. There are some bugs which are related to Ubuntu because all 4.1-rc3 -4.2-rc1 are signed as unstable, but the wifi works quite well. Unfortunately the bluetooth still doesn't work....

@AjinkyaZ

This comment has been minimized.

Copy link

AjinkyaZ commented Jul 12, 2015

will this work for the qca61x4 wireless adapter? I'm using a lenovo laptop, nothing shows up in lspci...would this work? I don't really want to risk damaging something unknowingly

@servicelogistikk

This comment has been minimized.

Copy link

servicelogistikk commented Jul 13, 2015

Thank you, been waiting so long for this, works like a charm. No need to reboot to windows or bring the wlan repeater any more :)

@tnadalie

This comment has been minimized.

Copy link

tnadalie commented Jul 13, 2015

Hello, i followed the steps as @giacomodabisias but when i ran "make -jX", the compilator tell me "no such file or directory for linux/slab.h" whereas this header is present in my filesystem.
Is anyone having the same trouble? I'm on a MSI GS60 2QE .

@giacomodabisias

This comment has been minimized.

Copy link

giacomodabisias commented Jul 13, 2015

After formatting the PC I got the same problem. Using the complete path of the file leads to other errors. No idea how to fix that

@mathew7481

This comment has been minimized.

Copy link

mathew7481 commented Jul 19, 2015

I followed this guide and it worked perfectly for me on a clean ubuntu 15.04 install. My machine is a Acer Aspire VN7 Nitro (VN7-791G-788H) with a Qualcomm Atheros QCA61x4.

These are the steps I did:

Hope this helps and many thanks for the driver developers and sumdog for providing the firmware.

@FireWalkerX

This comment has been minimized.

Copy link

FireWalkerX commented Dec 30, 2015

try with standard kernel version 4.3 instead

@phaazon

This comment has been minimized.

Copy link

phaazon commented Dec 31, 2015

@FireWalkerX I did, see my post just above.

@pascal-linux

This comment has been minimized.

Copy link

pascal-linux commented Jan 10, 2016

Hi,
I finally made my wifi running (Atheros QCA6174, rev. 32) using this hint:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1520343/comments/22
(I was sure that I tried every single combination of board and firmware. Maybe this was too much...)

Before that I updated to kernel 4.3.3 which was needed to fix a bug with intel grafic driver for the new Skylake processor..

Hope that helps! Good luck!
Pascal

@nixxynero

This comment has been minimized.

Copy link

nixxynero commented Jan 27, 2016

hey yo, i just downloaded but there arnt directions from what i found help?

@qmou

This comment has been minimized.

Copy link

qmou commented Mar 13, 2016

Copied board-2.bin to:
/lib/firmware/ath10k/QCA6174/hw3.0/board-2.bin
and firmware-4.bin_WLAN.RM.2.0-00180-QCARMSWPZ-1 to
/lib/firmware/ath10k/QCA6174/hw3.0/firmware-5.bin

fixed the wifi issue on AW 15 R2 with Killer 1535 board, tested on Ubuntu 16.04 with kernel 4.4.0-12
I still get the error mesg:
Direct firmware load for ath10k/cal-pci-0000:3c:00.0.bin failed with error -2
but the wifi works fine

@kayran

This comment has been minimized.

Copy link

kayran commented Mar 13, 2016

about the QCA9377, how to make this firmware work with it..

Em dom, 13 de mar de 2016 às 18:16, Qiushi Mou notifications@github.com
escreveu:

Copied board-2.bin to:
/lib/firmware/ath10k/QCA6174/hw3.0/board-2.bin
and firmware-4.bin_WLAN.RM.2.0-00180-QCARMSWPZ-1 to
/lib/firmware/ath10k/QCA6174/hw3.0/firmware-5.bin

fixed the wifi issue on AW 15 R2 with Killer 1535 board, tested on Ubuntu
16.04 with kernel 4.4.0-12


Reply to this email directly or view it on GitHub
#2 (comment).

[]'s

Kayran dos Santos

http://member.acm.org/~kayransantos
http://lattes.cnpq.br/7614696040399141

Mestrando em Ciência da Computação pela UFOP
Bacharel em Ciência da Computação pela UFOP

Ex - Diretor de Relações Públicas do Centro Acadêmico de Ciência da
Computação
Chapa Comunicação - Gestão CACIC 2012/2013

@msva

This comment has been minimized.

Copy link

msva commented Mar 15, 2016

Hi there!
Can somebody in this thread advice me, if it is safe to ignore Direct firmware load for ath10k/cal-pci-0000:3c:00.0.bin failed with error -2 error, and, if not, how can I add such file (with semicolons) in CONFIG_FIRMWARE_EXTRA? (If I trying to do so, make throws errors)
And also (if not) which file should be copied to that place? board-2.bin or firmware-5.bin?

Thanks in advance!

@denysvitali

This comment has been minimized.

Copy link

denysvitali commented Mar 29, 2016

I still have some problems with my home network.
At work and with Android Hotspot everything works fine, but when using my home network the authentication fails (even tough the password is correct, 100% sure) with QCA6174, but works properly with an external USB adapter (zd1211)

The following is the dmesg for the ath10k adapter:

[ 1573.761653] wlp7s0: authenticate with 00:22:10:ff:ff:ff
[ 1573.828831] wlp7s0: send auth to 00:22:10:ff:ff:ff (try 1/3)
[ 1573.830437] wlp7s0: authenticated
[ 1573.830774] ath10k_pci 0000:07:00.0 wlp7s0: disabling HT as WMM/QoS is not supported by the AP
[ 1573.830782] ath10k_pci 0000:07:00.0 wlp7s0: disabling VHT as WMM/QoS is not supported by the AP
[ 1573.833509] wlp7s0: associate with 00:22:10:ff:ff:ff (try 1/3)
[ 1573.863547] wlp7s0: RX AssocResp from 00:22:10:ff:ff:ff (capab=0x411 status=0 aid=4)
[ 1573.866243] wlp7s0: associated
[ 1573.866300] IPv6: ADDRCONF(NETDEV_CHANGE): wlp7s0: link becomes ready
[ 1577.904886] wlp7s0: deauthenticated from 00:22:10:ff:ff:ff (Reason: 1=UNSPECIFIED)

Note the reason 1=UNSEPCIFIED

@Kirk-H

This comment has been minimized.

Copy link

Kirk-H commented Mar 29, 2016

@denysvitali I have also had some issues with authenticating to WiFi when user/pass combined with LDAP or other tie through is used. I have found that setting IPv6 to link state only and disabling the /etc/hosts entry for ::1 help some. I also will save the network information and connect to a normal PSK network then hop back to the user/pass network a few times, which often gets authentication working.

If you are using firewalld, replace it with iptables as the firewalld often has zone issues which break DHCP using the ath10k WiFi chipset.

You could try moving your home network to a PSK solution and test it, that would prove that it's in the user/pass authentication setup and changing some of those settings may resolve the issue.

@denysvitali

This comment has been minimized.

Copy link

denysvitali commented Mar 29, 2016

Thank you for the answer @winnux76,
acutally my home wifi network is set as a WPA-PSK, so only a passphrase should be provided.
At work I do have two setups, one AP with WPA-PSK (passphrase) and the other with WPA-EAP (username / password authentication). Both works with no problem.
My home AP works well since I can use pretty much any device to connect to it, except my notebook with the ath10k.
I'll try the other solutions you provided tomorrow, thank you for your help! 👍

@denysvitali

This comment has been minimized.

Copy link

denysvitali commented Mar 30, 2016

Just tried,
I have removed the ::1 entry on /etc/hosts , renamed /etc/wpa_supplicant/wpa_supplicant.conf to /etc/wpa_supplicant/wpa_supplicant.conf.bak checked I wasn't having firewalld and tested again.
No success, same error:
deauthenticated from [ESSID placed here] (Reason: 1=UNSPECIFIED)

@Kirk-H

This comment has been minimized.

Copy link

Kirk-H commented Apr 1, 2016

Try disabling the network manager service and re-trying.

@denysvitali

This comment has been minimized.

Copy link

denysvitali commented Apr 2, 2016

@Winnux76 tried with no success.
wifi-menu reports "Scanning for networks... Could not read interface p2p-dev-wlp7s0 flags: No such device" and after that shows a list of wifi networks (as NetworkManager does), when I try to connect to my wifi network it fails and ask me to keep or discard the generated profile.
Please note that with an external usb wifi adapter I can successfully connect to my AP with both NetworkManager and netctl (wifi-menu)

@Kirk-H

This comment has been minimized.

Copy link

Kirk-H commented Apr 4, 2016

Here is the step by step process I used for my Samsung ATIV9 2k laptop.

create /usr/lib/firmware/ath10k if it does not exist
cd /usr/src
git clone https://github.com/kvalo/ath10k-firmware.git
cd ath10k-firmware
cp * /usr/lib/firmware/ath10k/
cd /usr/lib/firmware/ath10k/QCA6174/hw2.1
cp firmware-5.bin_SW_RM.1.1.1-00157-QCARMSWPZ-1 firmware-5.bin
Reboot.

Using these steps I did not have to modify the /etc/modprobe.d/ath10k_core.conf file. With prior installs and firmware I had to set this option in the file 'ath10k_core skip_otp=y'

If you do not rename the firmware file to remove everything after the .bin, the OS will not find the file and WiFi card will not work. Since the latest release of the firmware-5.bin file most of my auth issues, even with PEAP tied to AD have disappeared.

@claviola

This comment has been minimized.

Copy link

claviola commented Jul 13, 2016

FWIW, I (running Ubuntu 16.04) tried replacing all the QCA6174 firmware files with the version in master and when that failed, upgrading to the yakkety version of linux-firmware (1.158 as of the moment). Even with all that, in order for wifi to work on my laptop, I still have to replace "/lib/firmware/ath10k/QCA6174/hw3.0/board.bin" with a version from Killer Networking's website, as per:

http://www.killernetworking.com/product-support/knowledge-base/17-linux

The required file is directly available at:

http://www.killernetworking.com/support/K1535_Debian/board.bin

The machine is a Dell Latitude E7270. Here's the lspci output:

01:00.0 Network controller [0280]: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter [168c:003e](rev 32)
Subsystem: Dell QCA6174 802.11ac Wireless Network Adapter [1028:0310]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 130
Region 0: Memory at e1000000 (64-bit, non-prefetchable) [size=2M]
Capabilities:
Kernel driver in use: ath10k_pci
Kernel modules: ath10k_pci

@Lugatod

This comment has been minimized.

Copy link

Lugatod commented Jul 14, 2016

This version of "board.bin" file works also on my laptop Dell Latitude E7470. thank you !!

With all that steps I finally get wifi !! But still remain a problem, after a stand by of the laptop, no more wifi ... With a reboot wifi is coming back.
Do anyone knows how to get them back without reboot ?

@Lugatod

This comment has been minimized.

Copy link

Lugatod commented Jul 14, 2016

Here is the weird part of the result of dmesg:
[ 2782.246018] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[ 2782.246022] Bluetooth: hci0: QCA: patch rome 0x302 build 0x138, firmware rome 0x302 build 0x111
[ 2782.274336] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin

@Kingeng

This comment has been minimized.

Copy link

Kingeng commented Oct 28, 2017

claviola :
thank you man
with add this finally i get wifi !! (My own build PC)

@phaazon

This comment has been minimized.

Copy link

phaazon commented Oct 29, 2017

@thvasilo

This comment has been minimized.

Copy link

thvasilo commented Oct 30, 2017

Does anyone have any experience on whether this firmware helps with Bluetooth issues as well? I can't seem to get the device to recognize headphones (XPS 13 on Ubuntu 17.10)

@Samuel88

This comment has been minimized.

Copy link

Samuel88 commented Oct 30, 2017

What type of error do you have with Bluetooth ?? Because I used to connect my laptop with some bluetooth external speakers and it works well

@thvasilo

This comment has been minimized.

Copy link

thvasilo commented Oct 30, 2017

Specifically, it will not detect my Sony WH-800 headphones. These were working fine on my previous laptop. It's able to detect many devices (including my phone) but not the headphones. I also have a BT speaker (UE Roll 2), I haven't tested it with that yet.

Most devices show up as "Uknown"

My askubuntu post with more details.

@Samuel88

This comment has been minimized.

Copy link

Samuel88 commented Oct 30, 2017

Can you post hciconfig output and hcitool scan with headphones in pairing mode

@mirh

This comment has been minimized.

Copy link

mirh commented Oct 30, 2017

Just for the records, linux-firmware has been recently updated with some newer firmware for QCA6174/hw3.0 earlier this month.
Everybody might want to re-check its findings again then.

@thvasilo

This comment has been minimized.

Copy link

thvasilo commented Oct 30, 2017

@mirh I'm using the firmware off the latest master

@thvasilo

This comment has been minimized.

Copy link

thvasilo commented Oct 30, 2017

@Samuel88

> hciconfig 
hci0:	Type: Primary  Bus: USB
	BD Address: 9C:B6:D0:EC:FB:50  ACL MTU: 1024:8  SCO MTU: 50:8
	UP RUNNING 
	RX bytes:9299 acl:0 sco:0 events:510 errors:0
	TX bytes:15604 acl:0 sco:0 commands:283 errors:0
> hcitool scan
Scanning ...
	B8:E8:56:33:3D:89	MacBook Pro
	6C:0E:0D:CE:D8:10	J105i

The first is the laptop of a colleague, the second a phone.

@Samuel88

This comment has been minimized.

Copy link

Samuel88 commented Oct 31, 2017

but why yours headphone is not in the list ??

@thvasilo

This comment has been minimized.

Copy link

thvasilo commented Oct 31, 2017

@Samuel88 That's exactly the issue. It detects some other devices but only a MAC address is shown and the devices are listed as "Uknown". I'm not sure whether one of them are my headphones.

@Samuel88

This comment has been minimized.

Copy link

Samuel88 commented Oct 31, 2017

Listed as "Unknown" is different from not being detected. Because at least the MAC address must be show

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment